Automate on Hyperliquid - Strategy Webhook Template [HYPR-run]DESCRIPTION
You define the entry signal. The system manages everything after the fill. This is a production-grade trade system for automating strategies on Hyperliquid using TradingView webhooks. Five-level priority chain trade system. Four ATR trailing architectures including volume-weighted ATR with Efficiency Ratio scaling and ratchet floor. Smart stops that exit when a trade is invalidated. Pyramid scaling into winners and a redundant failsafe stop.
Three signal systems are included ready to backtest and deploy (EMA crossover, Turtle breakout, SFP - Swing Failure Pattern) that you can toggle on/off independently; replace or extend them with your own logic in three places: the input toggle, the signal condition, and the priority chain entry call. There are clear landmarks in the code to make it as straightforward as possible.
This strategy is built for you to hit the ground running backtesting or automating with a systematic framework to execute around your entry logic or the example signals provided. All signals fire on confirmed bar closes only. Entries, exits, pyramids, and stops are evaluated at close, not during the bar, so intrabar wick spikes do not trigger the system. This is by design. No lookahead bias: all highest/lowest references use prior-bar offsets, LinReg is calculated with offset=1, and no security() calls are used. The script does not repaint or compound returns.
WHAT THE STRATEGY SYSTEMIZES
1. Five-Level Priority Action Chain
Entries fire first. Pyramids fire second and block exits on the same bar. Trailing exits ride winners. Smart stops catch failing trades early. Failsafe stop is the absolute floor. The if/else order is intentional and prevents conflicts so that every action occurs only when it should.
2. Four ATR Trailing Stop Modes
Select from a dropdown. All use separate long/short look backs and multipliers because drops are faster than rallies; the defaults reflect this asymmetry.
• A3.1: LinReg + plain ATR, no ratchet. Baseline for comparison.
• A4.0 (default): LinReg + volume-weighted ATR + Efficiency Ratio + ratchet. VWATR discounts low-volume bars. ER tightens in chop (0.8x), widens in trend (1.2x). Ratchet means the stop only moves in your favor.
• A4.1: Chandelier + VWATR + ratchet + first-bar multiplier for tighter initial protection.
• A4.2: LinReg + VWATR, no ratchet or ER. Stop moves freely with projection.
***The multipliers determine how much room the stop gives price before triggering. They have the greatest influence on overall system performance and must be tuned to the asset and timeframe being traded. Default values are a starting point, not final settings.
• L Multi: 4.0 (long stop distance). Wider because uptrends are slower and require more room.
• S Multi: 2.0 (short stop distance). Tighter because drops are faster and corrections are sharper.
• Long LB: 14 bars. ATR lookback for long stops.
• Short LB: 26 bars. ATR lookback for short stops; longer lookback smooths volatile short-side moves.
• LinReg LB: 10 bars. LinReg projection window (A3.1, A4.0, A4.2).
• First Bar Mult: 1.5x (A4.1 only). Tighter stop on the entry bar; expands to standard multiplier after.
3. Smart Stops
Two trigger paths, both requiring open P&L below threshold (default -3.5%): (1) price crosses under the trailing stop while losing, or (2) price breaks the entry bar’s structure while losing. Either path exits the trade before the failsafe would trigger. The P&L condition on both paths prevents exits on noise when the trade is still within normal range.
4. Pyramid Entries
Scales into winning trades on 5-bar extremes. Requires full bar confirmation and must be within 13 bars of the initial entry.
5. Basic Entry Quality Filters
Applied automatically to every entry:
• Wick nullification: bars with wicks > 38.2% of range block entries in that direction
• SFP nullification: active reversal patterns block opposing entries
• Full bar filter: candle body must be >= 66.6% of total range
• Bar confirmation: entries only fire on confirmed bars
THREE SIGNALS INCLUDED (replace or extend)
• XO/XU: EMA crossover with four configurable pairs (5/13, 9/26, 12/25, 26/128). Requires price above swing high (longs) or below swing low (shorts) plus volume spike (Dropdown Selection).
• Turtle: 13/26 bar breakout with Lost Trade System logic. First breakout after an opposing signal gets priority.
• SFP: Swing Failure Pattern. Longs fire on either 5/5 with full-body confirmation or 5/2 with bullish candle confirmation and strong volume spike (1.618x average). Shorts fire on 5/5 with full-body or 13/3 with bearish candle confirmation. Dual-path per direction allows the signal to catch both high-conviction structure failures and high-volume reversals. The function accepts any left/right look back combination, making it straightforward to adapt. (#/# refers to pivot look back left and right)
Each has its own toggle. Enable one, combine them, or swap in your own signals.
WEBHOOK AUTOMATION
Every fill event fires through TradingView’s built-in webhook system when enabled: entries, exits, pyramids, smart stops, and failsafe closes. To execute those webhooks on Hyperliquid, an intermediary service (execution layer) that accepts TradingView webhooks and routes orders to Hyperliquid's API is required.
Setup:
1. Create an alert on this strategy
2. Set trigger to "Order fills only"
3. Check Webhook URL, paste your endpoint
4. Message box: {"ticker":"{{ticker}}","position":"{{strategy.market_position}}"}
5. Set expiration to Open-ended
The snippet will most likely require customization depending on your execution layer. The {{ticker}} and {{strategy.market_position}} fields are TradingView placeholders that auto-populate when a strategy signal fires.
We recommend referencing TradingView’s Strategy Alerts documentation to fully understand placeholder use and function when setting up your snippet for your execution layer: www.tradingview.com
BUILDING WITH YOUR OWN SIGNALS
The most straightforward path is adding your own entry logic. The ATR module, smart stops, and pyramids can also be edited to preferred logic while still leveraging the systemized structure for clean execution when automating on an exchange.
Option 1: Replace an existing signal. Find its section under the SIGNALS header (look for "EXAMPLE 1", "EXAMPLE 2", or "EXAMPLE 3"). Delete the example code and write your condition in its place. Find the matching entry in the STRATEGY CALLS priority chain and swap the condition variable. The toggle still works; rename its label in the input line. Everything downstream works automatically.
Option 2: Add a new signal. Three places to touch:
1. Copy a strategy toggle line from the STRATEGIES input group, change the variable name and label
2. Add your signal logic in the SIGNALS section as a boolean
3. Add an else-if block in the STRATEGY CALLS priority chain using your toggle as the gate
Two test switches (Tsw1, Tsw2) are reserved in Settings for custom signals.
READING THE CHART
Candles are colored by direction: black bodies up, gray bodies down (Quant Filter toggle).
The trailing stop draws as a colored line following your position: green below price when long, red/orange above price when short. A gradient fill shades the zone between price and the stop; it intensifies as price approaches the exit level.
Green dots on the long stop line and red dots on the short stop line are ratchet markers (A4.0 and A4.1 only). Each dot means the stop locked in a new level and will not pull back.
Entry labels appear at each fill: "xoL" (EMA long), "xuS" (EMA short), "tL" (Turtle long), "tS" (Turtle short), "sfpL"/"sfpS" (SFP entries), "pyrL"/"pyrS" (pyramid adds). Exit labels: "Cl"/"Cs" (trailing close long/short), "smrtstp" (smart stop), "fstp" (failsafe).
SFP candle wicks are color-coded by lookback: 5/5 bull wick = bright green, 5/2 bull wick = dark green, 5/5 bear wick = bright red, 13/3 bear wick = dark red. The shade tells you which configuration triggered — brighter means the more common 5/5 detection, darker means the secondary lookback fired.
Horizontal lines extending from entry price are the Late Entry Window: white solid line is entry price, green dashed line is entry + ATR window, red dashed line is entry - ATR window. Visual reference only; does not affect trade logic. Useful when away from the screen to quickly see if a missed entry is still within a safe ATR range.
Market structure labels (HH, LH, HL, LL) appear at swing pivots when the Structure toggle is enabled.
RISK MATH
Order size is fixed at $5,000 (50% of starting capital). That means it's always a flat $5k order, no compounding. With the failsafe at -5.25%, maximum loss per trade is $262.50, or 2.625% of the $10,000 starting balance.
*Because order size is fixed in dollars while equity grows, risk as a percentage of equity decreases over time: 2.625% at start, 2.1% at $12,500, 1.75% at $15,000. The smart stop triggers before the failsafe in most cases, reducing average realized loss further.
STRATEGY PROPERTIES (What's used in the chart published here)
Strategies (all off by default - toggle on to activate):
• XO/XU: on
• Turtle: on
• SFP: on
Settings:
• Mode: Historical (switch to Bot Mode for live automation - limits calculation depth for speed)
• EMA Pair: 9/26
Risk Management:
• Smart Stop: on | -3.5%
• Failsafe Stop: on | -5.25%
• Mech TP/Cls: on
ATR Trailing Exits:
• Mode: A4.0
• L Multi: 4.0 | S Multi: 2.0
• Lng LB: 14 | Shrt LB: 26
• LinReg: 10 | First Bar: 1.5 (A4.1 only)
Backtest Properties:
• Initial capital: $10,000
• Commission: 0.05%
• Slippage: 2 ticks
• Order size: $5,000 (cash, fixed)
• Fill limit assumption: 5 ticks
• Max risk per trade: $262.50 (2.625% of starting equity)
CREDITS
ATR: J. Welles Wilder (1978).
Efficiency Ratio: Perry Kaufman.
Turtle breakout concept: Richard Donchian.
אסטרטגיית Pine Script®
