התחל

Averagedailyrange

Average Daily Range by BlemAverage Daily Range (ADR) Indicator Displays the Average Daily Range of any instrument directly on your chart as a clean, screen-anchored overlay — accurate on any timeframe from 1-minute to weekly. What it shows: 1. Average Daily Range — the N-day average of daily high-low ranges (default 14 days) 2. ADR Remaining — how much of today's average range is still uncovered, useful for setting intraday targets (optional, can be toggled off) How it works: ADR is calculated using actual daily candle data regardless of the timeframe you are viewing, so the value is always consistent and accurate. Fully customizable: • ADR lookback period • Screen position (9 combinations — top/middle/bottom × left/center/right) • Background color, text color, text size • ADR Remaining color thresholds (green when range remains, red when nearly exhausted) • Toggle ADR Remaining on/off How to use: Traders use ADR to understand how much movement to expect in a session. When ADR Remaining is high, there is still room for the move to continue. When it approaches zero, the daily range is nearly complete and momentum may fade. ADR is a statistical generalization based on past price behavior. On any given day, price may fall short of the average, or exceed it significantly. It should never be treated as a guaranteed target or a hard boundary. Use it as a general reference for expected daily movement, not as a precise prediction.
אינדיקטור Pine Script®
מאת ‎Trader_Unkn0wn_‎
Average CandleAverage Candle is a simple volatility display indicator. It calculates the average candle range on a chosen higher timeframe (most commonly Daily) over a selected number of candles, converts that average range into pips, and shows the result as a small label on the chart. Traders can use it to quickly see “typical” movement for the day (or any timeframe) and adjust expectations for entries, stop loss distance, take profit targets, and position sizing.
אינדיקטור Pine Script®
מאת ‎zemanjose‎
[Stop!Loss] ADR Signal ADR Signal - a technical indicator located in a separate window, which displays by default the 80%-level , as well as the 100%-level of the average daily range (ADR) for the last 10 days and compares it with the current intraday range. The indicator helps not only with the use of a mathematical-statistical method to identify a potential reversal at the moment during intraday trading, but can also serves as an effective assistant in risk management. 👉 Basic mechanics of the indicator Firstly, this indicator tracks the performance of the standard ATR indicator on the daily chart, in other words, ADR (Average Daily Range). Important ❗️The ATR (Average True Range) indicator was created by J. Welles Wilder Jr. He first introduced ATR in his book "New Concepts in Technical Trading Systems", published in 1978. Wilder developed this indicator to measure market volatility to help traders estimate the range of price movements. This indicator is built into TradingView, more details can be found by link: www.tradingview.com Like ATR , ADR calculates the average true range for a specified period. In this case, the distance in points from the maximum of each day to its minimum is calculated, after which the arithmetic mean is calculated - this is ADR . 👉 Visualization ADR Signal is located in a separate window on the chart and has 3 levels: 1) "ADR level" (green line) - the same parameter, the calculations of which are briefly described above. There is 100%-level of ATR on the daily chart (ADR). 2) "Current level" (red line) - this is the current price passage within the day, calculated in points. At the start of a new day, this parameter is reset. Therefore, in the indicator window, this line has sharp drops at the start of a new trading day: "A new trading day - the instrument's power reserve is renewed again". 3) "Signal level" (blue line) - this is an individually customized value that demonstrates a certain part of the ADR parameter. 👉 Inputs 1) - is responsible for the ATR indicator period, the value of which will always be calculated on the daily chart. The default value is "10", that is, ATR is calculated for the last 10 days (not including the current one). 2) - signal level (in %). The default value is "0.8", that is, 80%-level of the ADR parameter (set earlier) is calculated. 👉 Style 1) - by default, this level is colored "blue". 2) - by default, this level is colored "red". 3) - by default, this level is colored "green". 👉 How to use this indicator Important❗️ The two methods of the use of the ADR Signal indicator described below will be most effective when trading intraday (which is highlighted quite well below), so it is more logical to use the indicator information on time periods H1 and below. 1) Identifying potential reversals during intraday trading: The ADR Signal indicator can be used as a potential individual reversal strategy. Important ❗️It should be noted that using it in it without additional confirming analysis tools will be a rather aggressive trading approach. Therefore, it is best to support the entry point in particular with other methods. In this case, the crossing of the red line (the number of points passed within the current day, that is, from the minimum of the current day to its maximum) and the blue line (color of the Signal level based on the default settings), indicates that the trading instrument has passed 80% (based on the default settings for the "Signal level") of its average distance from the maximum to the minimum over the past 10 days (based on the default settings for the "ADR Length"). Such a situation in the context of the mathematical-statistical approach indicates a probable reversal, since the "power reserve" of this instrument is mostly exhausted, so one can expect with a higher probability, at least, a price stop and possibly a reversal. In case of crossing of the red line and the green one (ADR level), it says again that based on the mathematical-statistical approach, this trading instrument has completely exhausted its intraday "power reserve". In this situation, a stop or reversal of the price will be even more likely. Of course, using the "Signal level" parameter, one can filter out even more reliable situations for potential price reversals within a day, namely, by specifying, for example, 1.5 in the field of this parameter. Under such conditions, in the case of crossing the red and blue lines (based on the default style settings), to say that the trading instrument has passed 150% of its average distance over the last 10 days (based on the default style settings "ADR length"). In this case, the probability of a stop or reversal of the price increases even more. 2) Use in risk management: In terms of risk management, this indicator is more applicable to open trades. For example, if one had an open Buy-position (especially if it is an intraday trade) and the price has raised significantly during the day, then the crossing of the red line with the blue line , and especially the red line with the green line , may indicate that the price will most likely stop growing, since the "power reserve" is almost or completely exhausted for this instrument within the current day. In this case, one can, at a minimum, move the trade to breakeven or even partially fix the profit. We will continue to discuss the methods of using this indicator and strategies based on it here. And we are always waiting for your reactions and feedback on this topic 💬. Thank you for your support 🚀
אינדיקטור Pine Script®
מאת ‎StopLoss222‎
Average Daily Range ProjectionsCreates a trailing high and low projection based on the Average Daily Range. Track the Session High and Low to determine the Daily Range. Average the Daily Range by a fixed Period to create an Average Daily Range . Track the Prior Daily Range . Track the Current Daily Range . Track the % of Range completion relative to the CDR & ADR(P). From the Session Low, project an Average Daily Range High by adding the ADR. From the Session High, project an Average Daily Range Low by subtracting the ADR. When %R reaches 100% or greater, the ADR HI & LO will lock, showing the range break out or break down. As the Session High and Low create the Daily Range, observe the reaction of price as it reaches the limit of the expected daily range. On strongly trending days, CDR is likely greater than PDR and ADR(P). Price can break away. On ranging days, %R may fail to reach 100% and CDR may be lesser than PDR and ADR(P). Price can bounce around within the bounds of ADR HI & LO.
אינדיקטור Pine Script®
מאת ‎intrdmnsnltrdr741‎
Average Session Range [QuantVue]The Average Session Range or ASR is a tool designed to find the average range of a user defined session over a user defined lookback period. Not only is this indicator is useful for understanding volatility and price movement tendencies within sessions, but it also plots dynamic support and resistance levels based on the ASR. The average session range is calculated over a specific period (default 14 sessions) by averaging the range (high - low) for each session. Knowing what the ASR is allows the user to determine if current price action is normal or abnormal. When a new session begins, potential support and resistance levels are calculated by breaking the ASR into quartiles which are then added and subtracted from the sessions opening price. The indicator also shows an ASR label so traders can know what the ASR is in terms of dollars. Session Time Configuration: The indicator allows users to define the session time, with default timing set from 13:00 to 22:00. ASR Calculation: The ASR is calculated over a specified period (default 14 sessions) by averaging the range (high - low) of each session. Various levels based on the ASR are computed: 0.25 ASR, 0.5 ASR, 0.75 ASR, 1 ASR, 1.25 ASR, 1.5 ASR, 1.75 ASR, and 2 ASR. Visual Representation: The indicator plots lines on the chart representing different ASR levels. Customize the visibility, color, width, and style (Solid, Dashed, Dotted) of these lines for better visualization. Labels for these lines can also be displayed, with customizable positions and text properties. Give this indicator a BOOST and COMMENT your thoughts! We hope you enjoy. Cheers!
אינדיקטור Pine Script®
מאת ‎QuantVue‎
10
ADR Study [TFO]This indicator is focused on the Average Daily Range (ADR), with the goal of collecting data to show how often price reaches/closes through these levels, as well as a look at historical moves that reached ADR and at similar times of day to study how price moved for the remainder of the session. The ADR here (blue line) is calculated using the difference between a day's highest and lowest points. If our ADR length is 5, then we are taking this difference from the last 5 days and averaging them together. At the following day's open, we take half of this average and plot it above and below the daily opening price to place theoretical limits on how far price may move according to the lookback period. The triangles indicate when price has reached ADR (either +ADR or -ADR), and alerts can be created for these events. The Scale Factor is an optional parameter to scale the ADR by a certain amount. If set to 2 for example, then the ADR would be 2x the average daily range. This value will be reflected in the statistics options so that users can see how different values affect the outcomes. Show Table will display data collected on how often price reaches these levels, and how often price closes through them, for each day of the week. By default, these are colored as blue and red, respectively. From the following chart of NQ1!, we can see for example that on Mondays, price reached +ADR 38% of the time and closed through it 23% of the time. Note that the statistics for closing through the ADR levels are derived from all instances, not just those that reached ADR. Show Sample Sizes will display how many instances were collected for all given sets of data. Referring to the same example of NQ1!, we can see that this particular chart has collected data from 109 Mondays. From those Mondays, 41 reached +ADR (38%, verifying our initial claim) and 25 closed through it (23%). This is important to understand the scope of the data that we're working with, as percentages can be misleading for smaller sample sizes. Show Histogram will plot the same exact data as the table, just in a histogram form to visually emphasize the differences on a day-by-day basis. On this chart of RTY1!, we can see for example from the top histogram that on Wednesdays, 40% reached +ADR and only 22% closed through it. Similarly if we look at the bottom histogram, we can see that Wednesdays reached -ADR 46% of the time and closed through it only 28% of the time. We can also use Show Sample Sizes to display the same information that would be in the table, showing how many instances were collected for each event. In this case we can see that we observed 175 Fridays, where 76 reached +ADR (43%) and 44 closed above it (25%). Show Historical Moves is an interesting feature of this script. When enabled, if price has reached +/- ADR in the current session, the indicator will plot the evolution of the close prices from all past sessions that reached +/- ADR to see how they traded for the remainder of the session. These calculations are made with respect to the ADR range at the time that price traded through these levels. Historical Proximity (Bars) allows the user to observe historical moves where price reached ADR within this many bars of the current session (assuming price has reached an ADR level in the current session). In the above chart, this is set to 1000 so that we can observe each and every instance where price reached an ADR level. However, we can refine this a bit more. By limiting the Historical Proximity to something like 20, we are only considering historical moves that reached ADR within 20 bars of todays +ADR reach (9:50 am EST, noted by the blue triangle up). We can enable Show Average Move to display the average move by the filtered dataset, and Match +/-ADR to only observe moves inline with the current day's price action (in this case, only moves that reached +ADR, since price has not reached -ADR). We can add one more filter to this data with the setting Only Show Days That: closed through ADR; closed within ADR; or either. The option either is what you see above, as we are considering both days that closed through ADR and days that closed within it (note that in this case, closing within ADR simply means that price reached +ADR and closed the day below it, and vice versa for -ADR; this does not mean that price must have closed in between +ADR and -ADR). If we set this to only show instances that closed within ADR, we see the following data. Alternatively, we can choose to Only Show Days That closed through ADR, where we would see the following data. In this case, the average move very much resembles the price action that occurred on this particular day. This is in no way guaranteed, but it makes an interesting case for how we could use this data in our analysis by observing similar, historical price action. Please note that this data will change over time on a rolling basis due to TradingView's bar lookback, and that for this same reason, lower timeframes will yield less data than larger timeframes.
אינדיקטור Pine Script®
מאת ‎tradeforopp‎
ADR % RangesThis indicator is designed to visually represent percentage lines from the open of the day. The % amount is determined by X amount of the last days to create an average...or Average Daily Range (ADR). 1. ADR Percentage Lines: The core function of the script is to apply lines to the chart that represent specific percentage changes from the daily open. It first calculates the average over X amount of days and then displays two lines that are 1/3rd of that average. One line goes above the other line goes below. The other two lines are the full "range" of the average. These lines can act as boundaries or targets to know how an asset has moved recently. *Past performance is not indicative of current or future results. The calculation for ADR is: Step 1. Calculate Today's Range = DailyHigh - DailyLow Step 2. Store this average after the day has completed Step 3. Sum all day's ranges Step 4. Divide by total number of days Step 5. Draw on chart 2. Customizable Inputs: Users have the flexibility to customize the script through various inputs. This includes the option to display lines only for the current trading day (`todayonly`), and to select which lines are displayed. The user can also opt to show a table the displays the total range of previous days and the average range of those previous days. 3. No Secondary Timeframe: The ADR is computed based on whatever timeframe the chart is and does not reference secondary periods. Therefore the script cannot be used on charts greater than daily. This script is can be used by all traders for any market. The trader might have to adjust the "X" number of days back to compute a historical average. Maybe they only want to know the average over the past week (5 days) or maybe the past month (20 days).
אינדיקטור Pine Script®
מאת ‎GoodGains‎
4
Average Range @coldbrewroshTaking the average daily range from low to high or high to low isn't the "best" way to get an idea of how much to set targets. So, I made this indicator to make the system better. This indicator calculates the daily range from Open to High on Bullish Days & Open to Low on Bearish Days . Nobody can catch the absolute low of the day on bullish days and get out at the high but one can enter at a reasonable price around the open ( 17:00 EST ) . To complement the Average Range, another table shows the movement in the opposite direction. For Instance: On Bullish Days how much it moved from Open to Low so that we have an idea of where to put the stop loss and vice versa. The time ranges calculated are the last 5 days, last 1 month, last 3 months & last 1 year. Note #1: Even though the date range is predefined, it has a different meaning. For Instance: date range of last 5 days means "calculation of the range of last 5 bullish daily candles & not last 5 days" . Note #2: Exclusive to Forex at the time of posting this.
אינדיקטור Pine Script®
מאת ‎coldbrewrosh‎
11
Average Daily Range (ADR) (Multi Timeframe, Multi Period)Average Daily Range (ADR) (Multi Timeframe, Multi Period, Extended Levels) Tips • Narrow Zones are an indication of breakouts. It can be a very tight range as well. • Wider Zones can be Sideways or Volatile. What is this Indicator? • This is Average Daily Range (ADR) Zones or Pivots. • This have Multi Timeframe, Multi Period (Up to 3 Levels) and Extended Target Levels. Advantages of this Indicator • This is a Leading indicator, not Dynamic or Repaint. • Helps to identify the reversal points. • The levels are more accurate and not like the old formulas. • Can practically follow the Buy Low and Sell High principle. • Helps to keep minimum Stop Loss. Who to use? • Highly beneficial for Day Traders • It can be used for Swing and Positions as well. What timeframe to use? • Any timeframe. When to use? • Any market conditions. How to use? Entry • Long entry when the Price reach at or closer to the Green Support zone. • Long entry when the Price retrace to the Red Resistance zone. • Short entry when the Price reach at or closer to the Red Resistance zone. • Short entry when the Price retrace to the Green Support zone. • Long or Short at the Pivot line. Exit • Use past ADR levels as targets. • Or use the Target levels in the indicator for breakouts. • Use the Pivot line as target. • Use Support or Resistance Zones as targets in reversal method. What are the Lines? Gray Line: • It the day Open or can be considered as Pivot. Red & Green ADR Zones: • Red Zone is Resistance. • Green Zone is Support. • Mostly price can reverse from this Zones. • Multiple Red and Green Lines forms a Zone. • These lines are average levels of past days which helps to figure out the maximum and minimum price range that can be moved in that day. • The default number of days are 5, 7 and 14. This can be customized. Red & Green Target Lines: • These are Target levels. What are the Labels? • First Number: Price of that level. • Numbers in (): Percentage change and Change of price from LTP (Last Traded Price) to that Level. General Tips • It is good if Stock trend is same as that of the Index trend. • Lots of indicators creates lots of confusion. • Keep the chart simple and clean. • Buy Low and Sell High. • Master averages or 50%.
אינדיקטור Pine Script®
מאת ‎Arun_K_Bhaskar‎
103
ADR% / ATR / Market CapDisplays the following values in a table in the upper right corner of the chart: ADR%: Average daily range (in percent). ATR: Average true range (hidden by default). Market Cap: Total value of all a company's shares of stock. All values are calculated based on daily bars, no matter what time frame you are currently viewing. Doesn't work for time frames >1D, which is why the table is not shown on weekly/monthly charts. Credit to MikeC / TheScrutiniser and GlinckEastwoot for ADR% formula, and ArmerSchlucker for the original script which includes LoD Dist . instead of Market Cap.
אינדיקטור Pine Script®
מאת ‎rwak‎
8
Average, Median, Mode, Biggest: Pip Range Measures & LabelsApply various simple statistical measures to series of full candle ranges over user input length (in bars). Choose between AVERAGE, MEDIAN, MODE, BIGGEST. All calculations derive from the high-low range of a candle. Default length = 260, the number of daily candles in a year. MODE is calculated from pip ranges rounded to reasonable increments (to nearest 10pips foreign currencies; to nearest 100 pips for DXY ; nearest $10 for other assets). Best only use MODE for the major FX pairs encoded, and on Daily timeframe . User input 'unit multiplier' only applies when asset is NOT a major Forex pair (unit and multiplier is auto applied for for major FX pairs). © twingall
אינדיקטור Pine Script®
מאת ‎twingall‎
3
Average Daily Range Fibonacci LevelsThe Average Daily Range is a simple concept, calculated as the difference between daily highs and lows averaged over some period. This indicator uses that range in conjunction with Fibonacci ratios to create zones centered on the day's open that tends to act as areas of support and resistance. The thicker White lines are the ADR levels; all other lines are the same value adjusted by the various Fibonacci values. A simpler version of this concept can be seen in my other script, Average Daily Range Zones, which does not include the Fibonacci ratio zones. Thanks to @Hank Hill for the original idea and TV for the feedback and support on the use of the security() function. Also thanks to @GoldenCross for the Fibonacci obsession.
אינדיקטור Pine Script®
מאת ‎colejustice‎
24
Average Daily Range ZonesThe Average Daily Range is a simple concept, calculated as the difference between daily highs and lows averaged over some period. This range is is overlaid and centered on the day's open, and tends to act as areas of support and resistance . This indicator provides two aggregation periods, creating a range that represents volatility in the ADR; a wider spread indicates greater recent volatility , and vice-versa. Thanks to @Hank Hill for the original idea and ToS script this is based on, and TV for the feedback and support on the use of the security() function.
אינדיקטור Pine Script®
מאת ‎colejustice‎
15
ADR% / ATR / LoD dist. TableDisplays the following values in a table in the upper right corner of the chart: ADR%: Average daily range (in percent). ATR: Average true range (hidden by default). LoD dist.: Distance of current price to low of the day as a percentage of ATR. All values are calculated based on daily bars, no matter what time frame you are currently viewing. Doesn't work for time frames >1D, which is why the table is not shown on weekly/monthly charts. Credit to MikeC / TheScrutiniser and GlinckEastwoot for ADR% formula
אינדיקטור Pine Script®
מאת ‎ArmerSchlucker‎
21
Position Sizing w/ ADR&ATR TrackingScript to use for position sizing based on portfolio size, max position, and max loss inputs. The option to use custom entry and stop are available, but default to last price for entry, and Low of Day (LoD) for stop. The ATR % is a measure of the low of day to current price as a percentage move. Credit to LonesomeTheBlue for the base code on position sizing and TheScrutiniser/GlinckEastwoot for ADR formula -Nelgoth, best of luck
אינדיקטור Pine Script®
מאת ‎Nelgoth‎
4
5 Day ADR ICT Intraday TrackerPretty self explanatory, this indicator tracks todays current range as a % of the 5 Day ADR. This is most useful for finding entries and looking for exits intraday, ie: how much hypothetical room is there for a trade to run? looking for entries in yellow and orange zones, exiting in blue once the ADR is reached etc. Reset variable should be used for the end of day close. For forex on Oanda its 1700. Probably a way to do this programatically, if its obvious let me know and i can update it. Can be set to clip output above 110% once the daily ADR has been fulfilled - this can be turned on or off. Experimental mode for finding consolidations, based on the ADR for each day not been fulfilled and contracting. can be good for finding pending range expansion. Code is pretty ugly, feel free to tweak. current known issues: Indicator doesnt work for many non forex pairs, due to coding laziness. Indicator does not work on 1 minute timeframe.
אינדיקטור Pine Script®
מאת ‎BryceWH‎
21