DrawIndicatorOnTheChart

Library "DrawIndicatorOnTheChart"
this library is used to show an indicator (such RSI, CCI, MOM etc) on the main chart with indicator's horizontal lines in a window. Location of the window is calculated dynamically by last price movemements

drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

הערות שחרור

v2

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth, windowLabel)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
windowLabel (string): is the label of the window
Returns: none

הערות שחרור

v5

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth, padding)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
padding (float): is the padding in percentage between chart and indicator window
Returns: none

הערות שחרור

v6

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicator4, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth, padding)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicator4 (float): is fourth indicator you want to show
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
padding (float): is the padding in percentage between chart and indicator window
Returns: none

הערות שחרור

v10

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

הערות שחרור

v11

הערות שחרור

v12

הערות שחרור

v13

הערות שחרור

v14

הערות שחרור

v15

הערות שחרור

v16

הערות שחרור

v17

הערות שחרור

v18

הערות שחרור

v19

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
Parameters:
enabled (bool)
indicatorName (string)
indicator1 (float)
indicator2 (float)
indicator3 (float)
indicatorcolors (array<color>)
period (int)
indimax_ (float)
indimin_ (float)
levels (array<float>)
precision (int)
xlocation (int)
lnwidth (int)

הערות שחרור

v20

הערות שחרור

v21

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

הערות שחרור

v22

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

הערות שחרור

v23

הערות שחרור

v24

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicatorcolor, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicatorcolor (color): is the color of indicator line
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

הערות שחרור

v25

הערות שחרור

v26

더해짐
findIndiLoc()

getIndiLevel(indi, indimax, indimin, top, bottom)
Parameters:
indi (float)
indimax (float)
indimin (float)
top (float)
bottom (float)

findLowestTimeframe(timeframes)
Parameters:
timeframes (array<int>)

findLabelIndex(timeframes, lowestTimeframe)
Parameters:
timeframes (array<int>)
lowestTimeframe (int)

drawMultipleIndicators(enabled, title, windowNumber, indicatorValues, timeframes, indicatorColors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
Parameters:
enabled (bool)
title (string)
windowNumber (int)
indicatorValues (array<float>)
timeframes (array<int>)
indicatorColors (array<color>)
period (int)
indimax_ (float)
indimin_ (float)
levels (array<float>)
precision (int)
xlocation (int)
lnwidth (int)

없어짐
drawIndicator(enabled, indicatorName, indicator1, indicatorcolor, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart

הערות שחרור

v27

없어짐
findIndiLoc()

הערות שחרור

v28

ספריית Pine

ברוח TradingView אמיתית, המחבר פרסם את קוד Pine זה כספריית קוד פתוח כך שמתכנתי Pine אחרים מהקהילה שלנו יוכלו לעשות בו שימוש חוזר. כל הכבוד למחבר! אתה יכול להשתמש בספרייה זו באופן פרטי או בפרסומי קוד פתוח אחרים, אך השימוש החוזר בקוד זה בפרסומים כפוף לכללי הבית.

brasscoin

כתב ויתור

המידע והפרסומים אינם אמורים להיות, ואינם מהווים, עצות פיננסיות, השקעות, מסחר או סוגים אחרים של עצות או המלצות שסופקו או מאושרים על ידי TradingView. קרא עוד בתנאים וההגבלות.

ספריית Pine

brasscoin