התחל

אינדיקטורים ואסטרטגיות

Swing Traces [BigBeluga]🔵 OVERVIEW The Swing Traces indicator identifies significant swing points in the market and extends them forward as fading traces. These traces represent the memory of recent highs and lows, showing how price interacts with past turning points over time. Traders can use the fading intensity and breakout signals to gauge when a swing has lost influence or when price reacts to it again. 🔵 CONCEPTS Swing Detection – Detects recent upper and lower swing points using sensitivity-based highs and lows. Trace Longevity – Each swing projects a “trace” forward in time, gradually fading with age until it expires. Trace Size – Each trace is drawn with both a main level and a size extension (half of the bar range) to highlight swing influence. Longevity Counters – Swings remain active for a customizable number of bars before fading out or being crossed by price. Swing Retest – Labels appear when price retest above/below an active trace extension levels, confirming potential reversal. 🔵 FEATURES Adjustable sensitivity length for swing detection. Separate longevity controls for upper and lower swing traces. Fading gradient coloring for visualizing how long a trace has been active. Double-trace plotting: one at the swing level and one offset by trace size. Clear BUY/SELL signals when price crosses a swing trace after it has matured. 🔵 HOW TO USE Use blue (upper) traces as resistance zones; lime (lower) traces as support zones. Watch for fading traces: the longer they persist, the weaker their influence becomes. Retest dots (●) confirm when price retest a trace, signaling a potential reversal. Shorter sensitivity values detect faster, smaller swings; longer values capture major swing structures. Combine with trend indicators or volume to filter false breakout signals. 🔵 CONCLUSION The Swing Traces indicator is a powerful tool for mapping price memory. By projecting recent swing highs and lows forward and fading them over time, it helps traders see where price may react, consolidate, or break through with strength. Its dynamic traces and breakout labels make it especially useful for swing traders, breakout traders, and liquidity hunters.
אינדיקטור Pine Script®
מאת ‎BigBeluga‎
2
Relative Performance Areas [LuxAlgo]The Relative Performance Areas tool enables traders to analyze the relative performance of any asset against a user-selected benchmark directly on the chart, session by session. The tool features three display modes for rescaled benchmark prices, as well as a statistics panel providing relevant information about overperforming and underperforming streaks. 🔶 USAGE Usage is straightforward. Each session is highlighted with an area displaying the asset price range. By default, a green background is displayed when the asset outperforms the benchmark for the session. A red background is displayed if the asset underperforms the benchmark. The benchmark is displayed as a green or red line. An extended price area is displayed when the benchmark exceeds the asset price and is set to SPX by default, but traders can choose any ticker from the settings panel. Using benchmarks to compare performance is a common practice in trading and investing. Using indexes such as the S&P 500 (SPX) or the NASDAQ 100 (NDX) to measure our portfolio's performance provides a clear indication of whether our returns are above or below the broad market. As the previous chart shows, if we have a long position in the NASDAQ 100 and buy an ETF like QQQ, we can clearly see how this position performs against BTSUSD and GOLD in each session. Over the last 15 sessions, the NASDAQ 100 outperformed the BTSUSD in eight sessions and the GOLD in six sessions. Conversely, it underperformed the BTCUSD in seven sessions and the GOLD in nine sessions. 🔹 Display Mode The display mode options in the Settings panel determine how benchmark performance is calculated. There are three display modes for the benchmark: Net Returns: Uses the raw net returns of the benchmark from the start of the session. Rescaled Returns: Uses the benchmark net returns multiplied by the ratio of the benchmark net returns standard deviation to the asset net returns standard deviation. Standardized Returns: Uses the z-score of the benchmark returns multiplied by the standard deviation of the asset returns. Comparing net returns between an asset and a benchmark provides traders with a broad view of relative performance and is straightforward. When traders want a better comparison, they can use rescaled returns. This option scales the benchmark performance using the asset's volatility, providing a fairer comparison. Standardized returns are the most sophisticated approach. They calculate the z-score of the benchmark returns to determine how many standard deviations they are from the mean. Then, they scale that number using the asset volatility, which is measured by the asset returns standard deviation. As the chart above shows, different display modes produce different results. All of these methods are useful for making comparisons and accounting for different factors. 🔹 Dashboard The statistics dashboard is a great addition that allows traders to gain a deep understanding of the relationship between assets and benchmarks. First, we have raw data on overperforming and underperforming sessions. This shows how many sessions the asset performance at the end of the session was above or below the benchmark. Next, we have the streaks statistics. We define a streak as two or more consecutive sessions where the asset overperformed or underperformed the benchmark. Here, we have the number of winning and losing streaks (winning means overperforming and losing means underperforming), the median duration of each streak in sessions, the mode (the number of sessions that occurs most frequently), and the percentages of streaks with durations equal to or greater than three, four, five, and six sessions. As the image shows, these statistics are useful for traders to better understand the relative behavior of different assets. 🔶 SETTINGS Benchmark: Benchmark for comparison Display Mode: Choose how to display the benchmark; Net Returns: Uses the raw net returns of the benchmark. Rescaled Returns: Uses the benchmark net returns multiplied by the ratio of the benchmark and asset standard deviations. Standardized Returns: Uses the benchmark z-score multiplied by the asset standard deviation. 🔹 Dashboard Dashboard: Enable or disable the dashboard. Position: Select the location of the dashboard. Size: Select the dashboard size. 🔹 Style Overperforming: Enable or disable displaying overperforming sessions and choose a color. Underperforming: Enable or disable displaying underperforming sessions and choose a color. Benchmark: Enable or disable displaying the benchmark and choose colors.
אינדיקטור Pine Script®
מאת ‎LuxAlgo‎
1
Forever ModelForever Model is a comprehensive trading framework that visualizes market structure through Fair Value Gaps (FVGs), Smart Money Technique (SMT) divergences, and order block confirmations. The indicator identifies potential price rotations by tracking internal liquidity zones, correlation breaks between assets, and confirmation signals across multiple timeframes. Designed for clarity and repeatability, the model presents a structured visual logic that supports manual analysis while maintaining flexibility across different assets and timeframes. All components are non-repainting, ensuring historical accuracy and reliable backtesting. Description The model operates through a three-part sequence that forms the visual foundation for identifying potential market rotations: Fair Value Gaps (FVGs) FVGs are price imbalances detected on higher timeframes—areas where price moved rapidly between candles, leaving an inefficiency that may be revisited. The indicator identifies both bullish and bearish FVGs, displaying them with color-coded levels that extend until mitigated. : Chart showing FVG detection with colored lines indicating bullish (green) and bearish (red) gaps Smart Money Technique (SMT) SMT detects divergence between the current chart asset and a correlated pair. When one asset makes a higher high while the other forms a lower high (or vice versa), it indicates a potential shift in delivery. The indicator draws visual lines connecting these divergence points and can filter SMTs to only display those occurring within FVG ranges. : Chart showing SMT divergence lines between two correlated assets with labels indicating the pair name] Order Block Confirmations (OB) When price confirms a signal by crossing a pivot level, an Order Block is created. The confirmation line extends from the pivot point, labeled as "OB+" for bullish signals or "OB-" for bearish signals. The latest OB extends to the current bar, while previous OBs remain fixed at their confirmation points. : Chart showing OB confirmation lines with OB+ and OB- labels at confirmation points] Key Features Higher Timeframe (HTF) Detection FVGs are detected on a higher timeframe than the current chart, with automatic HTF selection based on the current timeframe or manual override options. This ensures that internal liquidity zones are identified from the appropriate structural context. External Range Liquidity (ERL) Tracks the latest higher timeframe pivot highs and lows, marking external liquidity levels that may be revisited. ERL levels are displayed as horizontal lines with optional labels, providing context for potential continuation targets. : Chart showing ERL lines at recent HTF pivot points Signal Creation and Confirmation System The model creates pending signals when FVG levels are mitigated. Signals confirm when price closes beyond a pivot level, creating the OB confirmation line. Stop levels are automatically calculated from the maximum (bearish) or minimum (bullish) price between signal creation and confirmation. SMT Filtering Options Display all SMTs or only those within FVG ranges Require SMT for signal confirmation (optional filter) Automatic or manual SMT pair selection Support for both correlated and inverse correlated pairs Directional Bias Filter Filter FVG detection to show only bullish bias, bearish bias, or both. This allows analysts to align with higher timeframe structure or focus on unidirectional setups. Confirmation Line Management Toggle to extend only the latest confirmation line or all confirmation lines Transparent label backgrounds with colored text (red for bearish, green for bullish) Automatic cleanup of old confirmation lines (keeps last 50) Labels positioned at line end (latest) or middle (older lines) Position Sizing Calculator Optional position sizing based on account balance, risk percentage or fixed amount, and instrument-specific contract sizes. Supports prop firm calculations and can display position size, entry, and stop levels in the dashboard. Information Dashboard A customizable floating table displays: Current timeframe and HTF Remaining time in current bar Current bias direction Latest confirmed signal details (type, size, entry, stop) Pending signal status The dashboard can be repositioned, resized, and styled to match your preferences. Special Range Creation When signals confirm, the model can automatically create special range levels from stop prices. These levels persist on the chart as important reference points, even after mitigation, serving as potential reversal zones for future signals. Label and Visualization Controls Toggle FVG labels on/off Toggle confirmation lines on/off Customizable colors for bullish and bearish FVGs ERL color customization SMT line width adjustment Order Flow Integration (Optional) The indicator includes optional Open Interest (OI) based special range detection, allowing integration with order flow analysis for enhanced context. Technical Notes All components are non-repainting—once formed, they remain on the chart FVGs cannot be mitigated on their creation bar Signal-based special ranges persist even after mitigation (important stop levels) SMT detection supports both HTF and chart timeframe modes Maximum 50 confirmation lines are maintained for performance The model is designed to work across all asset classes and timeframes, providing a consistent framework for identifying potential market rotations through the interaction of internal liquidity, correlation breaks, and confirmation signals, this does not constitute as trading advice, past performance is no indication of future performance , this is entirely done for entertainment and educational purposes
אינדיקטור Pine Script®
מאת ‎mindyourbuisness‎
1
OSOM TrendHow to Use the OSOM Breakers Indicator The OSOM Breakers indicator is a customizable overlay tool for TradingView (Pine Script v5) that identifies market structure patterns, breakouts, breakers (order blocks), and price targets based on pivots, higher highs/lows (HH/LL), and breaks of structure (BoS/MSB). It helps visualize bullish/bearish trends, potential reversals, and target levels, with a focus on institutional "order blocks" (OB) for support/resistance. The indicator supports alerts indirectly through plotted events and is optimized for volatile markets like forex, crypto, or indices. 1. Adding the Indicator to Your Chart Open TradingView (tradingview.com) and load a chart for your desired asset. Click the "Indicators" button at the top. Search for "OSOM Breakers" (if community-shared) or add via Pine Editor: Open the Pine Editor tab at the bottom. Paste the provided code (from //@version=5 to the end). Click "Save" and name it (e.g., "OSOM Breakers"). Click "Add to Chart". The indicator overlays on your chart with defaults like dashed zigzag lines, HH/LL labels, and green/red colors for bull/bear elements. 2. Configuring Inputs Click the gear icon next to the indicator name in the legend to access settings. Inputs are grouped: Nephew_Sam Market Structure Settings: Pivot strength (default 5; higher for smoother, lower for sensitivity). Toggles for zigzag lines, BoS lines, HH/LL labels, and pattern matches. Nephew_Sam Bull/Bear Patterns: Pre-defined sequences (e.g., "LL,LH,LL,HH,HL" for bull patterns) with text labels (e.g., "BOS HL 1") and toggles. Customize up to 7 per direction for specific setups like BOS (break of structure) or MSS (market structure shift). Nephew_Sam Styles: Colors for HH/LL (green up, red down), labels, zigzag style (dashed/dotted), and width (1-4). Market Structure Break Targets Settings: Max duration (250 bars), calculation method (Percent or ATR), ATR multiplier (2.0). Enable/disable bull/bear MSB/BoS, set colors (green/red), and % targets (100% default). Breakers Settings: Max breaks (1; increase for stricter breaker confirmation), max duration (1000 bars). Colors for bullish MS (green), bull breaker (red), bearish MS (red), bear breaker (green). Defaults suit 15m-1h charts; reduce pivot strength for scalping (1m-5m) or increase for daily+. Test patterns on historical data to match your strategy. 3. Interpreting the Visuals and Signals Zigzag and HH/LL Labels: Dashed/dotted lines connect pivots; green for upswings, red for downswings (if enabled). Labels like "HH" (higher high), "LH" (lower high), "LL" (lower low), "HL" (higher low) appear at pivots. Green for bullish, red for bearish. Pattern Matches: Labels (e.g., "BOS HL 1") at pivots when sequences match user-defined bull/bear conditions. Up arrows for bull, down for bear. Use for spotting reversals or continuations (e.g., bull pattern after downtrend signals potential long). Market Structure Breaks (MSB/BoS): Solid lines: Green for bullish MSB/BoS (break above prior high), red for bearish (break below prior low). Labels: "MSB" or "MSS" (shift) at breaks, "BoS" for breaks of structure. Boxes: Translucent green/red "OB" (order block) boxes highlight ranges before breaks – potential support (post-bull break) or resistance (post-bear). Targets: Dotted horizontal/vertical lines extend from breaks to projected targets (percent of range or ATR-based). Active until hit or expired (after max duration). Green for bull targets (above), red for bear (below). Breakers: Dotted lines: Recent MSB/BoS levels that act as breakers (e.g., red dotted for bull breaker). Plotted shapes: "▲" (green below bar) for bull MSB breakout, "▼" (red above) for bear. Candle borders: Green for support events (price tests breaker from above), red for resistance (from below). Overall Direction: Tracks bullish (1) or bearish (-1) based on recent breaks; use for trend bias. 4. Trading Strategies Breakout Trading: Enter long on green "▲" (bull breakout) above MSB/BoS lines; short on red "▼" below. Target dotted lines (e.g., 100% of prior range). Order Block (OB) Plays: Buy at green OB boxes (support after bull break), sell at red (resistance after bear). Confirm with support/resistance events. Pattern-Based Reversals: Long on bull patterns (e.g., "BOS HL") after bearish structure; short on bear patterns. Filter with HH/LL (e.g., HH after LL signals uptrend). Trend Continuation: In bullish direction, stack longs on BoS breaks; use breakers as trailing stops. Risk Management: Stops below recent LL (longs) or above HH (shorts). Position size based on ATR (from targets). Avoid choppy markets by disabling patterns. Timeframes: Scalping (1m-15m with low pivot strength), swing (1h-4h), position (daily with higher strength). Combine with volume indicators for confirmation. 5. Alerts and Automation No built-in alertcondition(); set manual alerts in TradingView: Right-click chart > Add Alert > Condition (e.g., "OSOM Breakers - Bull MSB Breakout" crosses 1 for "▲"). Or alert on close crossing MSB/BoS lines (use indicator plots as conditions). For strategies: Convert to a strategy script by adding strategy() entries/exits based on breaks/patterns. 6. Tips and Best Practices Asset Suitability: Ideal for trending markets (e.g., BTC/USD, EUR/USD). Less effective in ranging; toggle off zigzag/boxes to reduce clutter. Performance: Limits (500 lines/boxes/labels) prevent overload; delete oldest automatically. Backtest on replay mode. Customization: Add custom patterns (e.g., for ICT/SMC concepts like fair value gaps). Match colors to your theme. Limitations: Relies on pivots – false signals in low-volatility; no volume integration (pair with another indicator). Targets are projections, not guarantees. Enhancements: Combine with OSOM Trend for volume confirmation. Practice on demo charts. This indicator provides a structured view of price action, emphasizing breaks and targets for systematic trading. Always validate with multiple timeframes and risk controls.
אינדיקטור Pine Script®
מאת ‎OSOM_‎
Match Finder [theUltimator5]Match Finder is the dating app of indicators. It takes your current ticker and finds the most compatible match over a recent time period. The match may not be Mr. right, but it is Mr. right now. It doesn't forecast future connection, but it tells you current compatibility for today. Jokes aside, it is a pattern–comparison tool that was designed to find the ticker that tracks most closely to the one you are currently looking at. It scans a user-defined list of 40 tickers (pre-set to a bunch of liquid ETFs) and finds which one most closely matches the recent price action of the current chart over a fixed lookback window. LOGIC BEHIND THE SCENES For each bar, the script: Takes the last N bars (Correlation Window Length) of the current symbol. Takes the last N bars of each selected comparison ticker. Calculates the Pearson correlation between the current symbol and each comparison ticker. Identifies the single best-matching ticker (highest positive correlation, excluding the current symbol itself). Rescales and overlays that matched segment on the chart so you can visually compare shapes. Optionally shows a correlation table with all tickers and their correlation values. The use case of this indicator is to help you see which symbol has recently moved most similarly to your current chart, and how that shape looks when overlaid in the same panel. It helps you see which sectors it may be following most closely to. Here is an image with arrows showing the elements of this indicator that will be mostly explained later. USER INPUTS 1. Correlation Window Length Default: 30 Range: 10–500 This is the number of bars used to compare the current symbol against each ticker. Important - Larger values produce more “global” shape comparison but increase computational load and may cause the indicator to timeout if the length is too long 2. Drawing Mode Options: Scale Only - Adjusts min and max of the plotted line segment to match the chart over the range Scale & Rotate - Scales as above, but matches the first and last point to the close of the chart over the range. This effectively rotates the pattern to force it to track the chart to an extent. 3. Show Correlation Table When enabled (disabled by default), shows a table in the bottom-right of the chart that displays the correlation values over the lookback range for all 40 tickers. The best fit ticker is highlighted. 4. Best Fit Line Color Color used to draw the overlaid best-match segment (yellow by default). 5. Ticker inputs (1–40) Default set to a broad universe of major ETFs (e.g., SPY, QQQ, IWM, sector and bond ETFs, commodities, etc.). You can replace these with any symbols supported by your data feed (stocks, ETFs, indexes, etc.). The script always excludes the current chart’s symbol from being considered as its own best match. NOTE: THIS INDICATOR IS EXTREMELY MEMORY INTENSIVE AND MAY TAKE SEVERAL SECONDS TO LOAD. PLEASE BE PATIENT AND GIVE THE INDICATOR UP TO 20 SECONDS FOR THE DATA TO DISPLAY
אינדיקטור Pine Script®
מאת ‎TheUltimator5‎
1
MAVW Trend Angle StrategyThis strategy is developed using the Mavilim indicator. It was chosen specifically because its smooth nature makes it ideal for trend angle analysis. However, this angle logic can also be applied to raw price action or other moving averages. Overview This script is a Long-Only strategy designed specifically for spot markets (Stocks, Crypto) where short selling is not desired. It utilizes a highly smoothed custom moving average (MAVW - Weighted Moving Average of WMAs) and calculates the geometric angle (slope) of the trend to identify strong momentum and filter out market noise. Unlike traditional Moving Average crossovers which often lag, this strategy focuses on the steepness of the trend. It aims to enter positions when the trend accelerates upward and exit when the momentum fades or turns downward. How It Works MAVW Calculation: The script calculates a complex chain of Weighted Moving Averages (WMAs) to create the "MAVW". This results in a curve that is extremely smooth and resistant to fake-outs compared to a standard SMA or EMA. Trend Angle (The Core Logic): Instead of looking at raw price action, the script calculates the angle (in degrees) of the MAVW line over a specific lookback period. Buy Signal: Triggered when the MAVW angle exceeds the Buy Threshold (e.g., > 0.2°). This indicates a strong upward impulse. Sell (Exit) Signal: Triggered when the MAVW angle drops below the Sell Threshold (e.g., < -0.2°). This indicates a strong downward impulse. Weak Trend / Flat Market Filter: A unique feature of this strategy is the "Close on Weak Trend" option. If enabled, the strategy will exit the position and go to CASH (Flat) if the trend angle falls between the Buy and Sell thresholds (e.g., between -0.2° and 0.2°). This protects capital during choppy, sideways markets. Key Features Long Only: No short selling. Ideal for spot trading and investors. Angle Filtering: filters out insignificant price movements by measuring the trend's slope. Sideways Market Protection: Optional setting to exit positions when the market loses direction (Trend Strength becomes "Weak"). Visuals: The MAVW line changes color based on your position status (Green = In Position, Gray = Cash). Info Panel: Displays the current trend angle and position status in real-time on the chart. Backtest Range: Includes a date filter to test specific time periods. Settings & Configuration MAVW Lengths: Adjust the First and Second lengths to change the sensitivity of the base curve. Buy Angle Threshold: Minimum angle required to enter a Long position (Default: 0.2). Increase this value to wait for stronger trends. Sell Angle Threshold: Angle required to hard-exit a position (Default: -0.2). Close on Weak Trend: If checked (True), the strategy exits to cash when the angle is near zero (sideways market). If unchecked, it holds until a negative trend angle occurs. Disclaimer This strategy is for educational purposes only. Past performance does not guarantee future results. Always perform your own backtesting before live trading.
אסטרטגיית Pine Script®
מאת ‎vahsi_bati‎
EMA+SuperThis indicator integrates multiple trend-following components into a unified, clean, and easy-to-interpret chart overlay. Its purpose is to help traders observe short-term and long-term trend direction, momentum shifts, and potential areas of interest using established moving-average and volatility-based techniques. 🔹 Features 1. Multi-EMA Framework Plots the 9, 21, 50, 100, and 200 EMAs to provide a structured view of short, medium, and long-term market trends. 2. Supertrend Overlay Applies an ATR-based Supertrend to visualize potential directional shifts. Both uptrend and downtrend zones are lightly shaded for improved clarity. 3. NovaWave-Style Trend Cloud A dynamic cloud formed from: Fast EMA Slow EMA Signal MA The cloud automatically adapts its color based on the relationship between the fast and slow EMAs, offering a quick visual read of momentum bias. 4. Displaced Moving Averages (20 / 50 / 200 DMA) Includes optional forward displacement to replicate commonly used DMA models in trend-following systems. 5. Crossover Buy/Sell Signals Buy and sell markers appear when the fast EMA crosses above or below the slow EMA. Users may create custom alerts via the TradingView alerts panel. 🔹 Alerts This indicator supports built-in EMA crossover alerts: Buy Alert – triggered when the fast EMA crosses above the slow EMA Sell Alert – triggered when the fast EMA crosses below the slow EMA Users can enable these alerts through the “Add Alert” panel and select the corresponding alert condition. Alerts are evaluated on bar close for consistency and do not repaint. 🔹 How to Use EMA structure helps define directional bias and market phase. The Supertrend and Trend Cloud offer contextual confirmation. EMA crossovers can help highlight momentum changes. DMAs provide an additional perspective on smoothed trend levels. This tool is intended for visual analysis and can complement other approaches such as volume studies, higher-timeframe trend analysis, or support/resistance mapping. ⚠️ Disclaimer This script is for educational and informational purposes only. It does not constitute financial advice or guarantee any outcome. Always perform independent analysis and apply proper risk management.
אינדיקטור Pine Script®
מאת ‎All_in_Traders‎
2
Reversal Correlation Pressure [OmegaTools]Reversal Correlation Pressure is a quantitative regime-detection and signal-filtering framework designed to enhance both reversal timing and breakout validation across intraday and multi-session markets. It is built for discretionary and systematic traders who require a statistically grounded filter capable of adapting to changing market conditions in real time. 1. Purpose and Overview Market conditions constantly rotate through phases of expansion, contraction, trend persistence, and noise-driven mean reversion. Many strategies break down not because the signal is wrong, but because the regime is unsuitable. This indicator solves that structural problem. The tool measures the evolving correlation relationship between highs and lows — a robust proxy for how “organized” or “fragmented” price discovery currently is — and transforms it into a regime pressure reading. This reading is then used as the core variable to validate or filter reversal and breakout opportunities. Combined with an internal performance-based filter that learns from its past signals, the indicator becomes a dynamic decision engine: it highlights only the signals that statistically perform best under the current market regime. 2. Core Components 2.1 Correlation-Based Regime Mapping The relationship between highs and lows contains valuable information about market structure: High correlation generally corresponds to coherent, directional markets where momentum and breakouts tend to prevail. Low or unstable correlation often appears in overlapping, rotational phases where price oscillates and mean-reversion behavior dominates. The indicator continuously evaluates this correlation, normalizes it statistically, and displays it as a pressure histogram: Higher values indicate regimes favorable to trend continuation or momentum breakouts. Lower values indicate regimes where reversals, pullbacks, and fade setups historically perform better. This regime mapping is the foundation upon which the adaptive filter operates. 2.2 Reversal Stress & Breakout Stress Signaling Raw directional opportunities are identified using statistically significant deviations from short-term equilibrium (overbought/oversold dynamics). However, unlike traditional mean-reversion or breakout tools, signals here are not automatically taken. They must first be validated by the regime framework and then compared against the performance of similar past setups. This dual evaluation sharply reduces the noise associated with reversal attempts during strong trends, while also preventing breakout attempts during choppy, anti-directional conditions. 2.3 Adaptive Regime-Selection Backtester A key innovation of this indicator is its embedded micro-backtester, which continuously tracks how reversal or breakout signals have performed under each correlation regime. The system evaluates two competing hypotheses: Signals perform better during high-correlation regimes. Signals perform better during low-correlation or neutral regimes. For each new trigger, the indicator looks back at a rolling sample of past setups and measures short-term performance under both regimes. It then automatically selects the regime that currently demonstrates the superior historical edge. In other words, the indicator: Learns from recent market behavior Determines which regime supports reversals Determines which regime supports breakouts Applies the optimal filter in real time Highlights only the signals that historically outperformed under similar conditions This creates a dynamic, statistically supervised approach to signal filtering — a substantial improvement over static or fixed-threshold systems. 2.4 Visual Components To support rapid decision-making: Correlation Pressure Histogram: Encodes regime strength through a gradient-based color system, transitioning from neutral contexts into strong structural phases. Directional Markers: Visual arrows appear when a signal passes all filters and conditions. Bar Coloring: Bars can optionally be recolored to reflect active bullish or bearish bias after the adaptive filter approves a signal. These components integrate seamlessly to give the trader a concise but complete view of the underlying conditions. 3. How to Use This Indicator 3.1 Identifying Regimes The histogram is the anchor: High, brightly colored columns suggest trend-friendly behavior where breakout alignment and directional follow-through have historically been stronger. Low or muted columns suggest mean-reversion contexts where counter-trend opportunities and reversal setups gain reliability. 3.2 Filtering Signals The indicator automatically decides whether a reversal or breakout trigger should be respected based on: the current correlation regime, the learned performance of recent signals under similar conditions, and the directional stress detected in price. The user does not need to adjust anything manually. 3.3 Integration with Other Tools This indicator works best when combined with: VWAP or session levels Market internals and breadth metrics Volume, order flow, or delta-based tools Local structural frameworks (support/resistance, liquidity highs and lows) Its strength is in telling you when your other signals matter and when they should be ignored. 4. Strengths of the Framework Automatically adapts to changing micro-regimes Reduces false reversals during strong trends Avoids false breakouts in overlapping, rotational markets Learns from recent historical performance Provides a statistically driven confirmation layer Works on all liquid assets and timeframes Suitable for both discretionary and automated environments 5. Disclaimer This indicator is provided strictly for educational and analytical purposes. It does not constitute trading advice, investment guidance, or a recommendation to buy or sell any financial instrument. Past performance of any statistical filter or adaptive method does not guarantee future results. All trading involves significant risk, and users are responsible for their own decisions and risk management. By using this indicator, you acknowledge that you are fully responsible for your trading activity.
אינדיקטור Pine Script®
מאת ‎OmegaTools‎
OSOM TrendHow to Use the OSOM Trend Indicator The OSOM Trend indicator is designed for use on TradingView charts. It provides trend identification, entry/exit signals, breakout detection, volume analysis, and market state insights. Below is a step-by-step guide to setting it up and using it effectively. 1. Adding the Indicator to Your Chart Open TradingView (tradingview.com) and load a chart for your desired asset (e.g., stock, crypto, forex). Click the "Indicators" button at the top of the chart. Search for "OSOM Trend" (if it's a community script, you may need to paste the Pine Script code into the Pine Editor). To add via Pine Editor: Click the Pine Editor tab at the bottom. Paste the provided code (from //@version=6 to the end). Click "Save" and name it (e.g., "OSOM Trend"). Click "Add to Chart". The indicator will overlay on your chart with default settings. 2. Configuring Inputs Once added, click the gear icon next to the indicator name in the chart legend to open settings. Inputs are grouped for ease: OSOM WV Settings: Adjust trend length (default 14 for sensitivity), smoothing (7), band width (0.8 ATR multiplier), ATR length (10). Toggle fast mode for minimal lag, signals, forecast, take-profits, and re-entries. Breakout Boxes Settings: Set pivot length (5), box widths (0.5 upper/lower via sliders), and colors. MMB Settings: Volume lookback (200), EMA smoothing (10). PVSRA Settings: Length (10), multipliers for climax/rising volumes (2.0/1.5). Optional symbol override (e.g., for aggregated BTC data). Vector Candle Zones: Toggle on/off, max zones (500), zone type (body/wicks), transparency (90). CVD Settings: Toggle long/short MAs (55/34 EMA), multipliers (1.5), lengths (40). Enable higher TF, volume integration, dynamic clouds, bar coloring, and status table. Start with defaults for most assets; reduce lengths for lower timeframes (e.g., 1m-15m) to increase responsiveness, or increase for higher TFs (e.g., daily) for smoother trends. Visual tweaks: Choose label size (small to reduce clutter), colors, and mode (Cloud for channels, Line Only for simplicity). 3. Interpreting the Visuals and Signals Trend Line and Bands/Cloud: Green (bullish) when price > upper band; red (bearish) when < lower band; gray (neutral). Cloud mode shows a filled channel; use for range visualization. Single Band highlights the active support/resistance. Buy/Sell Signals: Up arrow (↑) labels for buys (price crosses over upper band); down arrow (↓) for sells (crosses under lower band). If forecast enabled, labels show "count/avg" (e.g., "↑ 5/10") – current trend bars vs. smoothed historical average. Take-profit: "✖" labels when overextended (Z-score > threshold, RSI EMA slope reversal). Re-entries: "↻" labels on wick touches during trends (with cooldown to avoid spam). Breakout Boxes: Pink upper boxes (resistance) and green lower boxes (support) around pivots. Boxes display total volume and buy/sell % breakdown. Breakout signals: "BreakUp ⯁" or "BreakDn ⯁" labels/alerts when price crosses box edges – use for momentum trades. MMB (Market Maker Build): Green crosses below bars: Building long (accumulation). Red crosses above: Building short. Green X above: Closing long (distribution). Red X below: Closing short. Watch for clusters near support/resistance for institutional activity. PVSRA Candle Coloring: Overrides bar colors: Green/lime (bull climax), red (bear climax), blue (bull rising), violet/fuchsia (bear rising), gray (normal). Vector zones (translucent boxes) highlight high-volume areas as potential S/R. CVD (Cumulative Volume Delta): Bar colors: Blue (uptrend), red (downtrend) based on CVD vs. MAs. Status table (top-right): Checkmarks for Long/Short/Test/Sideways states. Long: CVD above both MAs (bullish confirmation). Short: Below both (bearish). Test: Near clouds (potential reversal). Sideways: Within parallels (range-bound). 4. Trading Strategies Trend Following: Enter long on buy signals in green trends; short on sell in red. Exit on opposite signals or take-profits. Use forecast for expected duration. Breakouts: Trade breakups from upper boxes (long) or breakdowns from lower (short). Confirm with volume % (e.g., high buy volume in upper box suggests strong breakout). Volume Confirmation: Align with MMB builds/closes and PVSRA climaxes for high-conviction entries. Avoid trades in sideways CVD states. Filters: Use RSI EMA slope in take-profits for overbought/oversold avoidance. Higher TF CVD for broader context. Timeframes: Versatile – scalping (1m-5m with fast mode), swing (1h-4h), position (daily+). Test on historical data. Risk Management: Set stops below lower band (longs) or above upper (shorts). Size positions based on ATR. 5. Alerts and Automation Set alerts via TradingView: Right-click chart > Add Alert > Condition (e.g., "Buy Signal" or "BreakUp"). Supported alerts: Buy/Sell, Take-Profit, BreakUp/Dn, MMB crosses, Vector patterns, CVD Long/Short entries. For scripting: Use alertcondition() calls in the code for custom notifications. 6. Tips and Best Practices Asset Suitability: Best on volume-rich assets (e.g., BTC/USD, stocks). For low-volume, disable CVD/MMB or use overrides. Performance: On busy charts, reduce max counts (labels/boxes) to avoid lag. Test fast mode for real-time trading. Backtesting: Use TradingView's replay or strategy tester (convert to strategy script by adding strategy() functions). Limitations: Not a standalone system – combine with fundamentals/news. Higher TF data may delay updates. Customization: Experiment with inputs; e.g., tighten bands (lower multiplier) for volatile markets. This indicator excels in providing multi-layered confirmation, reducing false signals through volume integration. Always practice on demo accounts before live trading.
אינדיקטור Pine Script®
מאת ‎OSOM_‎
9 Count Setup - Price Exhaustion DetectionThis indicator implements a counter-trend technical analysis tool designed to identify potential trend exhaustion points and reversal zones using a systematic counting methodology. How It Works: The indicator uses a specific 4-bar look-back comparison to detect price momentum: For bearish signals (red triangles above bars): The indicator counts consecutive bars where each close is HIGHER than the close from 4 bars earlier. When this condition is met 9 times in a row, it signals potential uptrend exhaustion. For bullish signals (green triangles below bars): The indicator counts consecutive bars where each close is LOWER than the close from 4 bars earlier. When this condition is met 9 times in a row, it signals potential downtrend exhaustion. The 4-bar comparison (rather than comparing consecutive closes) helps filter out short-term noise and focuses on sustained directional momentum. The count resets to zero whenever the comparison condition fails. Key Features: Configurable Display: Toggle between showing all counts (1-9) for educational purposes, or only the critical warning levels (7-8-9) for cleaner charts Real-time Counting: Numbers appear as the sequence builds, with 7 and 8 serving as early warnings 9-Count Signal: The number "9" indicates the Setup completion - a zone where price reversals statistically occur approximately 70% of the time according to some backtesting studies How to Use: A red "9" above a bar suggests the uptrend may be exhausted - potential short entry or long exit zone A green "9" below a bar suggests the downtrend may be exhausted - potential long entry or short exit zone The 7 and 8 counts provide advance warning that a potential reversal zone is approaching Best used in combination with other confirmation indicators and proper risk management Settings: "Show All Counts (1-9)": Enable this to display the complete count sequence for learning purposes. Disable to show only counts 7, 8, and 9 for a cleaner chart focused on actionable signals. Note: This indicator implements the Setup counting phase only. The complete methodology includes an additional phase (to 13), which is not implemented here. This standalone Setup indicator is effective for identifying potential reversal zones in trending markets.
אינדיקטור Pine Script®
מאת ‎Cuando‎
Trend Following Volatility Trail*Script was previously removed by Moderators at 1.8k boosts* - This was out of my control. This script was very popular and seemed to help a lot of traders. I am re uploading to help the community! Trend Following Volatility Trail The Trend Following Volatility Trail is a dynamic trend-following tool that adapts its stop, bias, and zones to real-time volatility and trend strength. Instead of using static ATR multiples like a normal Supertrend or Chandelier Stop, it continuously adjusts itself based on how stretched the market is and how persistent the trend has been. This indicator is based on volatility weighted EMAC This makes the system far more reactive during momentum phases and more conservative during consolidation, helping avoid fake flips and late entries. How It Works The indicator builds an adaptive trail around a smoothed price basis: – It starts with a short EMA as the “core trend line.” – It measures volatility expansion versus normal volatility. – It measures trend persistence by reading whether price has been rising or falling consistently. – These two components combine to adjust the ATR multiplier dynamically. As volatility expands or the trend becomes more persistent, the bands widen. When volatility compresses or the trend weakens, the bands tighten. These adaptive bands form the foundation of the trailing system. Bull & Bear State Logic The tool constantly tracks whether price is above or below the adaptive trail: Price above the upper trail → Bullish regime Price below the lower trail → Bearish regime But instead of flipping immediately, it waits for confirmation bars to avoid noise. This greatly reduces whipsaws and keeps the focus on sustained moves. Once a new regime is confirmed: – A coloured cloud appears (bull or bear) – A label marks the flip point – Alerts can be triggered automatically Best Uses Identifying regime shifts early Riding sustained trends with confidence Avoiding choppy markets by requiring confirmation Using the adaptive cloud as a directional bias layer
אינדיקטור Pine Script®
מאת ‎HDAlgos‎
Trading Sessions [QuantAlgo]🟢 Overview The Trading Sessions indicator tracks and displays the four major global trading sessions: Sydney, Tokyo, London, and New York. It provides session-based background highlighting, real-time price change tracking from session open, and a data table with session status. The script works across all markets (forex, equities, commodities, crypto) and helps traders identify when specific geographic markets are active, which directly correlates with changes in liquidity and volatility patterns. Default session times are set to major financial center hours in UTC but are fully adjustable to match your trading methodology. 🟢 Key Features → Session Background Color Coding Each trading session gets a distinct background color on your chart: 1. Sydney Session - Default orange, 22:00-07:00 UTC 2. Tokyo Session - Default red, 00:00-09:00 UTC 3. London Session - Default green, 08:00-16:00 UTC 4. New York Session - Default blue, 13:00-22:00 UTC When sessions overlap, the color priority is New York > London > Tokyo > Sydney. This means if London and New York are both active, the background shows New York's color. The priority matches typical liquidity and volatility patterns where later sessions generally show higher volume. → Color Customization All session colors are configurable in the Color Settings panel: 1. Click any session color input to open the color picker 2. Select your preferred color for that session 3. Use the "Background Transparency" slider (0-100) to adjust opacity. Lower values = more visible, higher values = more subtle 4. Enable "Color Price Bars" to color candlesticks themselves according to the active session instead of just the background The Color column in the info table shows a block (█) in each session's assigned color, matching what you see on the chart background. → Information Table Breakdown → Timeframe Warning If you're viewing a timeframe of 12 hours or higher, a red warning label appears center-screen. Session boundaries don't render accurately on high timeframes because the time() function in Pine Script can't detect intra-bar session changes when each bar spans multiple sessions. The warning tells you to switch to sub-12H timeframes (e.g., 4H, 1H, 30m, 15m, etc.) for proper session detection. You can disable this warning in Color Settings if needed, but session highlighting can be unreliable on 12H+ charts regardless. → Time Range Configuration Every session's time range is editable in Session Settings: 1. Click the time input field next to each session 2. Enter time as HHMM-HHMM in 24-hour format 3. All times are interpreted as UTC 4. Modify these to account for daylight saving shifts or to define custom session periods based on your backtested optimal trading windows For example, if your strategy performs best during London/NY overlap specifically, you could set London to 08:00-17:00 and New York to 13:00-22:00 to ensure you see the full overlap highlighted. → Weekdays Filter The "Weekdays Only (Mon-Fri)" toggle controls whether sessions display on weekends: Enabled: Sessions only show Monday-Friday and hide on Saturday-Sunday. Use this for markets that close on weekends (most equities, forex). Disabled: Sessions display 24/7 including weekends. Use this for markets that trade continuously (crypto). → Table Display Options The info table has several configuration options in Table Settings: Visibility: Toggle "Show Info Table" on/off to display or hide the entire table. Position: Nine position options (Top/Middle/Bottom + Left/Center/Right) let you place the table wherever it doesn't block your price action or other indicators. Text Size: Four size options (Tiny, Small, Normal, Large) to match your screen resolution and visual preferences. → Color Schemes: Mono: Black background, gray header, white text Light: White background, light gray header, black text Blue: Dark blue background, medium blue header, white text Custom: Manual selection of all five color components (table background, header background, header text, data text, borders) → Alert Functionality The indicator includes ten alert conditions you can access via TradingView's alert system: Session Opens: 1. Sydney Session Started 2. Tokyo Session Started 3. London Session Started 4. New York Session Started 5. Any Session Started Session Closes: 6. Sydney Session Ended 7. Tokyo Session Ended 8. London Session Ended 9. New York Session Ended 10. Any Session Ended These alerts fire when sessions transition based on your configured time ranges, letting you automate monitoring of session changes without watching the chart continuously. Useful for strategies that trade specific session opens/closes or need to adjust position sizing when volatility regime shifts between sessions.
אינדיקטור Pine Script®
מאת ‎QuantAlgo‎
Dresteghamat-Multi timeframe Regime & Exhaustion**Dresteghamat-Multi timeframe Regime & Exhaustion** This script is a custom decision-support dashboard that aggregates volatility, momentum, and structural data across multiple timeframes to filter market noise. It addresses the problem of "Analysis Paralysis" by automating the correlation between lower timeframe momentum and higher timeframe structure using a weighted scoring algorithm. ### 🔧 Methodology & Calculation Logic The core engine does not simply overlay indicators; it normalizes their outputs into a unified score (-100 to +100). The logic is hidden (Protected) to preserve the proprietary weighting algorithm, but the underlying concepts are as follows: **1. Adaptive Timeframe Selection (Context Engine)** Instead of static monitoring, the script detects the user's current chart timeframe (`timeframe.multiplier`) and dynamically assigns two relevant Higher Timeframes (HTF) as anchors. * *Logic:* If Current TF < 5min, the script analyzes 15m and 1H data. If Current TF < 1H, it shifts to 4H and Daily data. This ensures the analysis is contextually relevant. **2. Regime & Volatility Filter (ATR Based)** We use the Average True Range (ATR) to determine the market regime (Trend vs. Range). * **Calculation:** We compare the current Swing Range (High-Low lookback) against a smoothed ATR. A high Ratio (> 2.0) indicates a Trend Regime, activating Trend-Following logic. A low ratio dampens the signals. **3. Directional Bias (Structure + Flow)** Direction is not determined by a single crossover. It is a fusion of: * **Swing Structure:** Using `ta.pivothigh/low` to identify Higher Highs/Lower Lows. * **Volume Flow:** Calculating the cumulative delta of candle bodies over a lookback period. * **Micro-Bias:** A short-term (default 5-bar) momentum filter to detect immediate order flow changes. **4. Exhaustion Logic (Mean Reversion Warning)** To prevent buying at tops, the script calculates an "Exhaustion Score" based on: * **RSI Divergence:** Detecting discrepancies between price peaks and momentum. * **Volatility Extension:** Identifying when price has deviated significantly from its volatility mean (VRSD logic). * **Volume Anomalies:** Detecting low volume on new highs (Supply absorption). ### 📊 How to Read the Dashboard The table displays the raw status of each timeframe. The **"MODE"** row is the output of the algorithmic decision tree: * **BUY/SELL ONLY:** Generated when the Current TF momentum aligns with the dynamically selected HTF structure AND the Exhaustion Score is below the threshold (default 70). * **PULLBACK:** Triggered when the HTF Structure is bullish, but Current Momentum is bearish (indicating a corrective phase). * **HTF EXHAUST:** A safety warning triggered when the HTF Volatility or RSI metrics hit extreme levels, overriding any entry signals. * **WAIT:** Default state when volatility is low (Range Regime) or signals conflict. ### ⚠️ Disclaimer This tool provides algorithmic analysis based on historical price action and volatility metrics. It does not guarantee future results.
אינדיקטור Pine Script®
מאת ‎dr-esteghamat‎
SR Strategy (Short) to my deer 📌 **SR Smart Strategy — Short Only** This strategy detects high-probability short setups based on supply/resistance zones confirmed by volume weakness. --- ### 🔍 **How it works** 1. The script automatically detects potential resistance levels using pivot highs. 2. A valid resistance level requires **low buying volume**, which reduces the probability of breakout continuation. 3. When price rejects the resistance zone or breaks below a support turned resistance, the strategy enters a short position. 4. Stop loss is placed dynamically below/above the detected zone to maintain realistic risk control. 5. Take profit is calculated by a configurable risk-to-reward ratio. --- ### 🎯 **Best Use Cases** - Works best on trending markets. - Recommended timeframe: **4H or 1H** - Suggested markets: Crypto futures, FX, and commodities. --- ### 🛡 **Why this strategy is different** ✔ Filters false breakouts using **volume logic** ✔ Automatically updates **dynamic S/R zones** ✔ Smart stop-loss selection when structures are too far ✔ No repaint in historical backtest --- ### ⚠ Notes - The script focuses on **short entries only**. - Always combine with macro trend context or moving averages if trading manually. --- 💡 This strategy can be used for live alerts or fully automated execution via WebHook APIs.
אסטרטגיית Pine Script®
מאת ‎laughingx7‎
Multi-Indicator Trading SystemThree part indicator combined into one with a checklist table for visualization. You get three alert types: BUY SIGNAL: All conditions aligned for long entry! SELL SIGNAL: All conditions aligned for short entry! as well as a ANY SIGNAL setting ⚠️ TRADING SIGNAL: Check chart for details! This indicator works on all products and on your preferred timeframe. This indicator combines 3 published indicators into one: Supertrend - KivancOzbilgic QQE MOD - Mihkel00 RSI + ADX + ATR Strength Gauge - jaredskii Below are the new signal requirements to receive an alert: BUY Signal - ALL of these must be true: ✅ Supertrend flips from bearish to bullish ✅ ADX > threshold (strong trend present) ✅ +DI > -DI (bullish directional movement) ✅ QQE shows bullish momentum confirmation SELL Signal - ALL of these must be true: ✅ Supertrend flips from bullish to bearish ✅ ADX > threshold (strong trend present) ✅ -DI > +DI (bearish directional movement) ✅ QQE shows bearish momentum confirmation DISCLAIMER: Apply risk management and conduct your own analysis to agree with the parameters provided in this script. Hope you enjoy.
אינדיקטור Pine Script®
מאת ‎UN1TED‎
1
Chart Analyser — Full dashboard + insights Chart Analyser — Full dashboard + insights (Pine v5) A composite overlay that combines EMA trend, VWAP, RSI, ADX, MACD, ATR, Bollinger Bands, volume context, and pivot S/R into a single charting tool. It marks pivots directly on candles (labels + plotshape) and provides a fixed top‑right dashboard with metric readouts and a one‑line “takeaway” bias. Highly configurable colors and thresholds make it suitable for intraday and swing trading. Interpretation & suggested use - Trend filter: use the EMA alignment (fast > med > slow) as your primary trend filter. Prefer long bias only when trend is Bull and short bias only when Bear. - Momentum confirmation: require RSI not extreme and MACD histogram confirming the direction of trade bias. - Trend strength: ADX >= 25 suggests the trend has strength; pair trade entries with ADX confirmation if you need higher-probability setups. - Volatility sizing: ATR and BB width help size stops and determine whether to expect range expansion; a squeeze suggests possible upcoming expansion but not direction. - Volume: treat volume spikes as confirmation of breakout/turning points when they coincide with pivot break or VWAP breaks. - Support/Resistance: last pivot High = short‑term resistance; last pivot Low = short‑term support. Distances in the dashboard show how close price is to S/R. - Takeaway summary: uses composite logic combining trend, momentum, volume and pivot SR to provide a quick bias indication — treat it as guidance, not a trade signal generator.
אינדיקטור Pine Script®
מאת ‎Sjswoop‎