התחל

Nononsensefx

NNFX, Baseline, QQEs Fast C1, Slow C2, ATR, Volume and ExitDesigned Around the NNFX rules Selectible Baseine Selectible Exit Indicators ATR bands, ATR labels for TP and TSL (1x and 1.5x ATR). Indication (White Diamond) where candle is over 1x ATR in size. Combined QQE Fast & Slow (C1 & C2) confirmations, Candles Grey before Trend Confirmed, change to Normal Colour when Trend established (QQE MOD used for calcualtions). Continuations signaled by white dot above/below candle (0.9x ATR from Close Signal). Exit Long and Exit Short signaled by Red and Blue Arrow under/above candle.
אינדיקטור Pine Script®
מאת ‎chrisfraser05‎
19
+ BB %B: MA selection, bar coloring, multi-timeframe, and alerts+ %B is, at its simplest, the classic Bollinger Bands %B indicator with a few added bells and whistles. However, the right combination of bells and whistles will often improve and make a more adaptable indicator. Classically, Bollinger Bands %B is an indicator that measures volatility, and the momentum and strength of a trend, and/or price movements. It shows "overbought" and "oversold" spots on a chart, and is also useful for identifying divergences between price and trend (similar to RSI). With + %B I've added the options to select one or two moving averages, candle coloring, and a host of others. Let's start with the moving averages: There are options for two: one faster and one slower. Or combine them how you will, or omit one or both of them entirely. Here you will find options for SMA, EMA (as well as double and triple), Hull MA, Jurik MA, Least Squares MA, Triangular MA, Volatility Adjusted MA, and Weighted MA. A moving average essentially helps to define trend by smoothing the noise of movements of the underlying asset, or, in this case, the output of the indicator. All of these MAs available track this in a different way, and it's up to the trader to figure out which makes most sense to him/her. MA's, in my opinion, improve the basic %B by providing a clearer picture of what the indicator is actually "seeing", and may be useful for providing entries and exits. Next up is candle coloring: I've added the option for this indicator to color candles on the chart based on where the %B is in relation to its upper and lower bounds, and median line. If the %B is above the median but below the upper bound, candles will be green (showing bullish market structure). If %B is below the median but above the lower bound, candles will be red (denoting bearish market structure). Overbought and oversold candles will also be colored on the chart, so that a quick glance will tell you whether price action is bullish/bearish or "oversold"/"overbought". I've also added functionality that enables candles to be colored based on if the %B has crossed up or crossed down the primary moving average. One example as a way to potentially use these features is if the candles are showing oversold coloration followed by the %B crossing up your moving average coloration. You might consider a long there (or exit a short position if you are short). And the last couple of tweaks: You may set the timeframe to whatever you wish, so maybe you're trading on the hourly, but you want to know where the %B is on the 4h chart. You can do that. The background fill for the indicator is split into bullish and bearish halves. Obviously you may turn the background off, or make it all one color as well. I've also added alerts, so you may set alerts for "overbought" and "oversold" conditions. You may also set alerts for %B crossing over or under the primary moving average, or for crossing the median line. All of these things may be turned on and off. You can pretty much customize this to your heart's delight. I see no reason why anyone would use the standard %B after playing with this. I am no coder. I had this idea in my head, though, and I made it happen through referencing another indicator I was familiar with, and watching tutorials on YouTube. Credits: Firstly, thanks to www.tradingview.com for his brilliant, free tutorials on YouTube. Secondly, thanks to www.tradingview.com for his beautiful SSL Hybrid indicator (and his clean code) from which I obtained the MAs. Please enjoy this indicator, and I hope that it serves you well. :)
אינדיקטור Pine Script®
מאת ‎ClassicScott‎
13
Indicator - EVZ Chart - DGHey Traders, this is the $EVZ chart plotted as an indicator. The $EVZ is the Euro Volatility Index, which can be used to measure volatility in markets. The use of the $EVZ could be helpful for trend traders of FX. The concept developed by VP of no nonsense forex, we can use the value of the $EVZ to determine when we put on full risk if there is high volatility, half risk when there is medium volatility, or no risk if there is very low volatility. This indicator has 2 adjustable horizontal lines, so you can put in the conditions or thresholds you need for your trading strategy. Happy trading, DG
אינדיקטור Pine Script®
מאת ‎Dillon_Trades‎
1
Crypto TrendThis indicator is based off of the Trend Follower system put together by jiehonglim: This is a trend following system that combines 3 indicators which provide different functionalities, also a concept conceived by VP's No Nonsense FX / NNFX method. I’m primarily modifying this system for Crypto trading (mostly leveraged Crypto Futures). Suggestions/requests welcome. New Features: Added position inputs that will generate position labels For leverage trading, position inputs will calculate your percentage-based stop loss given your entry, leverage and liquidation price Added optional horizontal line plots for entry, stop loss, 50% take profit and 100% profit levels. Added non-plotted Didi calculations for alert condition triggers Added long and short alerts These alerts will trigger for any of the 3 following conditions: Baseline cross with volume confirmation Didi two line cross with volume confirmation Didi continuation with volume confirmation 1. Baseline The main baseline filter is an indicator called Modular Filter created by Alex Grover - www.tradingview.com - Alex Grover - Modular Filter ------- That's the moving average like baseline following price, filtering long and short trends and providing entry signals when the price crosses the baseline. Entry signal indicated with arrows. 2. Volume / Volatility , I will called it Trend Strength The next indicator is commonly known as ASH, Absolute Strength Histogram. This indicator was shared by VP as a two line cross trend confirmation indicator, however I discovered an interesting property when I modified the calculation of the histogram. - Alex Grover Absolute Strength ------- My modification and other info here - Absolute Strength Histogram v2 ------- I simplified the display of the trend strength by plotting squares at the bottom of the chart. - Lighted Squares shows strength - Dimmed Squares shows weakness 3. Second Confirmation / Exits / Trailing Stop Finally the last indicator is my usage of QQE (Qualitative Quantitative Estimation), demonstrated in my QQE Trailing Line Indicator - QQE Trailing Line for Trailing Stop ------- Three usages of this amazing indicator, serving as : - Second trend confirmation - Exit signal when price crosses the trailing line - Trailing stop when you scaled out the second trade This indicator is plotted with crosses. 4. Position Calculator For non-leveraged trades, set leverage to 1 and liquidation to 0 Fill out the rest of the position field to get labels that will tell you: Your stop loss given your acceptable percentage of loss for your risk. So, for example if your actual investment is $200 and you’re trading on 20X leverage, you’d like to know what price would have to drop to for you to lose 15% of your $200 risk. This is what the position calculator is doing for you. Your 50% take profit point Your 100% take profit point Check the “Show Position Lines” to plot horizontal lines for entry, stop loss, 50% TP and 100%TP Alerts You just get a Long Alert or Short Alert option. This was for two reasons, the first and most important was to reduce the number of alerts needed for this system to get maximum coverage. The second was just to keep things simple. Get an alert for your desired direction for any interesting signal and then check the chart manually to determine if a viable entry has presented itself. The three alert conditions are: Main trend indicator, baseline cross with volume confirmation Didi two line cross entry with volume confirmation Didi continuation signal with volume confirmation Additional plots and information Bar Color - Green for longs, Red for shorts, White when the baseline direction conflicts with the QQE trailing line direction - When it's white, it's usually ranging and not trending, ASH will also keep you off ranging periods. ------- ATR Filter - White circles along the baseline, they will show up if the price has moved more than one ATR from the baseline - The default allowance is 1 ATR. ------- The previous and current ATR value - Label on the right side of the chart showing the previous and current value of ATR
אינדיקטור Pine Script®
מאת ‎willmarple‎
6
NNFX Baseline ToolNNFX All-in-One Baseline display / test tool. This is usefull (hopefully) for the NNFX way of trading only. It's not intended to be used as a standalone tool. Basically, this script displays and tests many types of Moving Averages as baselines. It displays baseline signals, based on the NNFX ATR-related rule for baseline entries. It can be used as a backtest tool, or plugged into the whole nnfx algo. If signal display option is enabled, signals are displayed on chart : green for long, red for short, orange for crossovers beyond the ATR channel : Many baselines available : SMA , EMA , WMA , VWMA , ALMA , AMA, SMMA , DEMA , FRAMA , HULL, KAMA , KIJUN, JURIK, LAGUERRE, MCGINLEY , TMA1, TMA2, VIDYA , MODULAR FILTER, VAMA , ZLEMA , T3, LSMA, etc. Additional options : - multiplying the ATR channel (and subsequent rule) by a factor (default = 1) - plot the ATR channel (def = yes) - fill it (def = yes) - display signals (def = yes) - option for add color to the baseline, for long/short territory (2 different options : baseline is colored, background is colored) - darkmode / lightmode color option. (def = dark) We also display panels, with general information and some test results. Tests are done within the test period. I tried to test all the different MAs included in the script but some bugs might still be present, so use it at ur own risk. If you'd like a new MA option added, please let me know in comments. I included a "bad" signal detection, it can help for tweaking the settings. Signals are defined as "bad" when they are immediately followed by another signal. When there is 2 or more bad signals next to another, you spotted a chopiness zone (a chopiness zone is defined as a zone where BL get eaten alive). Example : to do : - plug it with the c1/c2 backtest tool (it's the whole point) - add alerts, - add more ma types - stop to use the operator, it's not convenient at all - add wr% calculation as a standalone feature (with TP / SL) - add a way to measure chopiness in the test (dont know how yet) - detect & display chopiness zones I asked other users when I used their ideas (for some particular types of MAs). They all agreed.
אינדיקטור Pine Script®
מאת ‎sickojacko‎
24
Enhanced Time Segmented Volume (Multi MA)**THIS VERSION ALLOWS THE USER TO SELECT WHICH MOVING AVERAGE THEY WOULD LIKE TO UTILIZE FOR THE SIGNAL LINE** Chart shows two different options of many. Top option is the default settings and bottom option is a different moving average with no other changes. Time Segmented Volume was developed by Worden Brothers, Inc to be a leading indicator by comparing various time segments of both price and volume. Essentialy it is designed to measure the amount of money flowing in and out of an instrument. Time Segmented Volume was originally ported to TradingView by user @liw0 and later corrected by user @vitelot. I never quite understood how to read Time Segmented Volume until I ran across a version by user @storma where they indicated when price would be long or short, but that code also utilized the incorrect calculation from user @liw0. In an effort to make Time Segmented Volume more accessible and easier to read, I have re-coded it here. The calculations are based on the code from @vitelot and I have added direction indicators below the chart. If the histogram (TSV) is greater than zero and greater than the moving average, price should be moving long and there will be a green box below the chart. If TSV falls below the moving average while still being greater than zero, the trend may be exhausting and has been coded to read Price Action Long - FAILURE with a black x below the chart. If the histogram (TSV) is less than zero and less than the moving average, price should be moving short and there will be a red box below the chart. If TSV rises above the moving average while still being less than zero, the trend may be exhausting and has been coded to read Price Action Short - FAILURE with a black x below the chart. At times, the moving average may be above zero while TSV is below zero or vice versa. In these situations the chart will indicate long or short based on whether or not TSV is greater or less than zero. It is possible a new trend may be forming as the moving average obviously lags, but also possible price is consolidating with little volume and causing TSV to oscillate close to zero. More information regarding Time Segmented Volume can be found here: www.worden.com Original code ported by @liw0 Corrected by @vitelot Updated/Enhancements by @eylwithsteph with inspiration from @storma Multiple MA Options Credits to @Fractured and @lejmer Bits and Pieces from @AlexGrover, @Montyjus, and @Jiehonglim As always, trade at your own risk.
אינדיקטור Pine Script®
מאת ‎StephXAGs‎
8
Enhanced Time Segmented VolumeTime Segmented Volume was developed by Worden Brothers, Inc to be a leading indicator by comparing various time segments of both price and volume. Essentialy it is designed to measure the amount of money flowing in and out of an instrument. Time Segmented Volume was originally ported to TradingView by user @liw0 and later corrected by user @vitelot. I never quite understood how to read Time Segmented Volume until I ran across a version by user @storma where they indicated when price would be long or short, but that code also utilized the incorrect calculation from user @liw0. In an effort to make Time Segmented Volume more accessible and easier to read, I have re-coded it here. The calculations are based on the code from @vitelot and I have added direction indicators below the chart. If the histogram (TSV) is greater than zero and greater than the moving average, price should be moving long and there will be a green box below the chart. If TSV falls below the moving average while still being greater than zero, the trend may be exhausting and has been coded to read Price Action Long - FAILURE with a black x below the chart. If the histogram (TSV) is less than zero and less than the moving average, price should be moving short and there will be a red box below the chart. If TSV rises above the moving average while still being less than zero, the trend may be exhausting and has been coded to read Price Action Short - FAILURE with a black x below the chart. At times, the moving average may be above zero while TSV is below zero or vice versa. In these situations the chart will indicate long or short based on whether or not TSV is greater or less than zero. It is possible a new trend may be forming as the moving average obviously lags, but also possible price is consolidating with little volume and causing TSV to oscillate close to zero. More information regarding Time Segmented Volume can be found here: www.worden.com Original code ported by @liw0 Corrected by @vitelot Updated/Enhancements by @eylwithsteph with inspiration from @storma As always, trade at your own risk.
אינדיקטור Pine Script®
מאת ‎StephXAGs‎
27
[mya] ATR FilteredATR Filtered for NNFX trading. A classic Average True Range (ATR) indicator with a simple feature to filter out the spikes. The ATR value is the tool to determine your TP and SL on daily time-frame, specifically in the NNFX way of trading. VP mentions in his podcast that when the ATR spikes up you have 2 options: 1. wait 14 candles for the ATR to normalize, 2. use the ATR value prior to the spike. ATR spikes are easy to spot (thus easy to exclude) for an itraday flash crash. On the other hand when volatility increases over several candles (as in the Covid-19 shock) it can be difficult to determine which ATR value to base your TP/SL on. In definition of standard deviation, 95.4% of the value will fall within the 2 sigma bands. Therefore the rest 4.6% can be filtered out as an extreme value (a spike). The ATR in this indicator will plot the standard ATR value in normal condition, then when the ATR spike happens it will stay at the highest value at the point, when the ATR exceeded its 2 sigma band. The filtering will reset when the ATR comes back down below the extended highest value. *Disclaimer: Use at your own risk. I am not a programmer, just another guy trying to beat this game. Let's go get it.
אינדיקטור Pine Script®
מאת ‎myataro‎
3
Underworld Hunter + Base ZoneUnderworld Hunter + Base Zone is designed to keep traders out of ranging markets by establishing a "dead zone" between the bands where price may be choppy or trends may be short lived. The original Underworld Hunter from @greenmask9 adapted Bollinger Bands by changing the basis from SMA to the EMA of the EMA of the EMA. This version now allows the user to select which moving average they would like to utilize for the calculation. If price is outside of the upper bands, price may be bullish. If price is outside the lower bands, price may be bearish. If price is within the green or red areas of the bands, a trend may be forming. The system also plots when RSI has become over extended above the thresholds selected (70/20 is the default). MA Period is the length/period the moving average is calculated with MA Mode is the type of moving average that will be utilized in the basis calculation The "Standard MA Calculation" Option changes the basis to calculate the moving average selected in MA Mode only once, instead of 3 times Deviation 1 and Deviation 2 determine how far the dead zone bands will be from the basis RSI Period is the length/period the RSI function is calculated with RSI Extended - High Cutoff is the level RSI must reach to be marked as over extended. Most traders refer to this zone as "Overbought" RSI Extended - Low Cutoff is the level RSI must reach to be marked as over extended. Most traders refer to this zone as "Oversold" As many NNFx traders know, overbought and oversold essentially do not exist, though the zones can still be utilized The remaining options are utilized for specific moving average calculations and are set to what is typically considered as "standard" for their values. There are many options available for this code. The code has not been optimized but merely compiled. Settings should be adjusted for the instrument(s) you are trading. Adapted from user @greenmask9 Multiple MA Options Credits to @Fractured and @lejmer Bits and Pieces from @AlexGrover, @Montyjus, and @Jiehonglim As always, trade at your own risk.
אינדיקטור Pine Script®
מאת ‎StephXAGs‎
6
Trend Follower - Light Mode | jhFollow up script for my Trend Follower script. I'm used to dark mode, so I coded a few key plots in white, so those are changed into black on the script. Notably: - > 1 ATR in black dots along the baseline - Current and previous ATR text labels to the right of the price - A text label spacing input that allows you to adjust the spacing for text label from price. This is a trend following system that combines 3 indicators which provide different functionalities, also a concept conceived by VP's No Nonsense FX / NNFX method. 1. Baseline The main baseline filter is an indicator called Modular Filter created by Alex Grover - www.tradingview.com - Alex Grover - Modular Filter ------- That's the moving average like baseline following price, filtering long and short trends and providing entry signals when the price crosses the baseline. Entry signal indicated with arrows. 2. Volume/Volatility, I will called it Trend Strength The next indicator is commonly known as ASH, Absolute Strength Histogram. This indicator was shared by VP as a two line cross trend confirmation indicator, however I discovered an interesting property when I modified the calculation of the histogram. - Alex Grover Absolute Strength ------- My modification and other info here - Absolute Strength Histogram v2 ------- I simplified the display of the trend strength by plotting squares at the bottom of the chart. - Lighted Squares shows strength - Dimmed Squares shows weakness 3. Second Confirmation / Exits / Trailing Stop Finally the last indicator is my usage of QQE (Qualitative Quantitative Estimation), demonstrated in my QQE Trailing Line Indicator - QQE Trailing Line for Trailing Stop ------- Three usages of this amazing indicator, serving as : - Second trend confirmation - Exit signal when price crosses the trailing line - Trailing stop when you scaled out the second trade This indicator is plotted with crosses. Additional plots and information Bar Color - Green for longs, Red for shorts, White when the baseline direction conflicts with the QQE trailing line direction - When it's white, it's usually ranging and not trending, ASH will also keep you off ranging periods. ------- ATR Filter - White circles along the baseline, they will show up if the price has moved more than one ATR from the baseline - The default allowance is 1 ATR. ------- The previous and current ATR value - Label on the right side of the chart showing the previous and current value of ATR
אינדיקטור Pine Script®
מאת ‎jiehonglim‎
7
Trend Follower | jhThis is a trend following system that combines 3 indicators which provide different functionalities, also a concept conceived by VP's No Nonsense FX / NNFX method. 1. Baseline The main baseline filter is an indicator called Modular Filter created by Alex Grover - www.tradingview.com - Alex Grover - Modular Filter ------- That's the moving average like baseline following price, filtering long and short trends and providing entry signals when the price crosses the baseline. Entry signal indicated with arrows. 2. Volume/Volatility, I will called it Trend Strength The next indicator is commonly known as ASH, Absolute Strength Histogram. This indicator was shared by VP as a two line cross trend confirmation indicator, however I discovered an interesting property when I modified the calculation of the histogram. - Alex Grover Absolute Strength ------- My modification and other info here - Absolute Strength Histogram v2 ------- I simplified the display of the trend strength by plotting squares at the bottom of the chart. - Lighted Squares shows strength - Dimmed Squares shows weakness 3. Second Confirmation / Exits / Trailing Stop Finally the last indicator is my usage of QQE (Qualitative Quantitative Estimation), demonstrated in my QQE Trailing Line Indicator - QQE Trailing Line for Trailing Stop ------- Three usages of this amazing indicator, serving as : - Second trend confirmation - Exit signal when price crosses the trailing line - Trailing stop when you scaled out the second trade This indicator is plotted with crosses. Additional plots and information Bar Color - Green for longs, Red for shorts, White when the baseline direction conflicts with the QQE trailing line direction - When it's white, it's usually ranging and not trending, ASH will also keep you off ranging periods. ------- ATR Filter - White circles along the baseline, they will show up if the price has moved more than one ATR from the baseline - The default allowance is 1 ATR. ------- The previous and current ATR value - Label on the right side of the chart showing the previous and current value of ATR Adding my Didi and ASH indicators up on this screenshot Didi Index Improved with QQE
אינדיקטור Pine Script®
מאת ‎jiehonglim‎
34
Centerline SupertrendA centerline/non-chart indicator version of Everget's Supertrend script for use in NNFX-style indicator setups, with the emphasis on this indicator NOT adding visual clutter to the main charting area with a baseline indicator already present. This is literally the EXACT same script as Everget's Supertrend, but not drawn on the chart and with the fill/stop and fill/state level removed. Adjust to your timeframe/asset and backtest/forward-test accordingly. Source script by Everget (Supertrend):
אינדיקטור Pine Script®
מאת ‎UnknownUnicorn2796841‎
7
Baseline-C [ID: AC-P]The "AC-P" version of jiehonglim's NNFX Baseline script is my personal customized version of the NNFX Baseline concept as part of the NNFX Algorithm stack/structure for 1D Trend Trading for Forex. Everget's JMA implementation is used for the baseline smoothing method, with optional ATR bands at 1.0x and 1.5x from the baseline. NNFX = No Nonsense Forex Baseline = Component of the NNFX Algorithm that consists of a single moving average Baseline ---> Meant to be used in conjunction with ATR/C1/C2/Vol Indicator/Exit Indicator as per NNFX Algorithm setup/structure. C1 is 1st Confirmation Indicator, C2 is 2nd Confirmation Indicator. JMA (Jurik Moving Average) is used for the baseline and slow baseline. A slow baseline option is included, but disabled by default. The faint orange/purple lines are 1.0x/1.5x ATR from the Baseline, and are what I use as potential TP/SL targets or to evaluate when to stay out of a trade (chop/missed entry/exit/other/ATR breach), depending on the trade setup (in conjunction with C1/C2/Vol Indicator/Exit Indicator) This script is heavily based upon jiehonglim's NNFX Baseline script for signaling, barcoloring, and ATR. SSL Channel option included but disabled by default (Erwinbeckers SSL component) POC (Point of Control) from Volume Profile is included/enabled by default for both the current timeframe and 12HR timeframe 03.freeman's InfoPanel Divergence Indicator was used a reference to replace the current/previous ATR information infopanel/info draw from jiehonglim's script. I'm not sure whether I like the previous way ATR info was displayed vs how I have it currently, but it's something that is completely optional: Specifically: I am tuning this baseline/indicator for 1D trading as part of the NNFX system, for Forex. DO NOT USE THIS INDICATOR WITHOUT PROPER TUNING/ADJUSTMENT for your timeframe and asset class. Note about lack of alerts: Alerts for baseline crosses (and other crosses) have been purposefully omitted for this version upon initial publication. While getting alerts for baseline crosses under certain conditions/filtered conditions that eliminate low-importance signals and crossover whipsaw would be great, it's something I'm still looking into. SPECIFICALLY: There are entry, exit, take profit, and continuation signal components in relation to the Baseline to the rest of the NNFX Algorithm stack (ATR/C1/C2/Vol Indicator/Exit Indicator), including but limited to the "1 candle rule" and the "7 candle rule" as per NNFX. Implementing alerts that are significant that also factor in these rules while reducing alert spam/false signals would be ideal, but it's also the HTF/Daily chart - visually, entry/exit/continuation signal alignment is easy to spot when trading 1D - alerts may be redundant/a pursuit in diminishing returns (for now). //------------------------------------------------------------------- // Acknowledgements/Reference: // jiehonglim, NNFX Baseline Script - Moving Averages // // Fractured, Many Moving Averages // // everget, Jurik Moving Average/JMA // // 03.freeman, InfoPanel Divergence Indicator // // Ggqmna Volume stops // // Libertus RSI Divs // // ChrisMoody, CM_Price-Action-Bars-Price Patterns That Work // // Erwinbeckers SSL Channel //
אינדיקטור Pine Script®
מאת ‎UnknownUnicorn2796841‎
9
QQE Trailing Line for Trailing Stop | jhUsing parts of QQE (Qualitative Quantitative Estimation) again, this time I'm applying the trailing line of QQE on price directly. Outcome, it's behaving like a baseline filter and it can be use as an exit or a trailing stop indicator. As comparing to Kijun-sen line in yellow, the QQE trailing line follows the price closer, therefore exiting you sooner when the trend direction changes. There's 2 QQE option, they behave differently during the trend change. Credits to Glaz and Shizaru for their QQE code.
אינדיקטור Pine Script®
מאת ‎jiehonglim‎
3
Didi Index Improved with QQE | jhI was perplexed by the lack of continuation signals in trends, so I spent some time looking for a suitable indicator just for that purpose and fast indicators that can provide continuation signals tend to be too noisy as well. I'm always intrigued by QQE (Qualitative Quantitative Estimation), so I QQE-ed almost everything I encountered. After a while, I settled on Didi Index and enhanced it by adding an additional signal line calculated from QQE trailing line. The QQE trailing line provides additional cross overs for the short/fast Didi line, specially created for the NNFX continuation signals in the same direction. The QQE trailing line acts as zero cross, providing an additional filter for ranging periods. There's a few ways of identifying the cross overs: Didi cross overs signals are highlighted with shapes at the top. Didi long signal when fast and slow Didi crosses above zero Didi short signal when fast and slow Didi crosses below zero Continuation signals are highlighted with shapes at the bottom. Continuation long signal when Didi fast line cross over QQE trailing line Continuation short signal when Didi fast line cross under QQE trailing line Example of continuation trades Example of filtering bad signals from your baseline, confirmation or continuation signals. Credits to Glaz and Shizaru for their QQE code.
אינדיקטור Pine Script®
מאת ‎jiehonglim‎
17
SSL [dasanc]The SSL is a fair entry condition and good exit indicator. It works best when combined with a trend indicator and multiple confirmations. In essence, the SSL is a moving average crossover, which immediately down-grades it to a 2nd or 3rd level of confluence in my opinion. It was recently featured in an episode of VP's "No Nonsense FX", which drove me to recreate the original MT4 indicator in PineScript. I have two ideas on how to improve it - Use a much faster moving average calculation method (check out my Ehlers scripts) Use a longer period MA on lower timeframes If you enjoy/use this script, drop me a follow and please note me in your code! I'm *almost* always available for collabs and questions
אינדיקטור Pine Script®
מאת ‎DasanC‎
3
No Nonsense NNFX VP Strategy for Back Testing Indicators| jhAfter putting the whole system together, sat down to benchmark the various confirmation indicators, shrink it down to backtest individual confirmation indicators. Results for 24 periods way better than 10, then again it's only one pair. :) More details below. ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// //Designed per No Nonsense Forex VP rules //For testing your individual indicators before the full system //Originated from causecelebre //Tried to put in as much VP rules as possible /////////////////////////////////////////////////// //Rules Implemented: /////////////////////////////////////////////////// // - SL 1.5 x ATR // - TP 1 x ATR // // - Entry conditions //// - Entry from 1 x confirmation // - Exit conditions //// - Exit on confirmation flip /////////////////////////////////////////////////// //Trades entries /////////////////////////////////////////////////// // - First entry L1 or S1 with standard SL and TP /////////////////////////////////////////////////// //Included Indicators and settings /////////////////////////////////////////////////// // - Confirmtion = SSL 10 /////////////////////////////////////////////////// //Credits // Strategy causecelebre www.tradingview.com // SSL Channel ErwinBeckers www.tradingview.com ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// //Change log //First release. Testing of indicators //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
אסטרטגיית Pine Script®
מאת ‎jiehonglim‎
1
No Nonsense NNFX VP Strategy for Back Testing | jhMy first script, be kind :) Most of the rules are implemented: - Money management - ATR, Baseline, Confirmation, Volume, Exit More details below. ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// //Designed per No Nonsense Forex VP rules //Made to be as modular as possible, so we can swap the indicators in and out. //Originated from causecelebre //Tried to put in as much VP rules as possible /////////////////////////////////////////////////// //Rules Implemented: /////////////////////////////////////////////////// // - SL 1.5 x ATR // - TP 1 x ATR // // - Entry conditions //// - Entry within 1 candles of baseline + 1 x confirmation + volume //// - Entry only if baseline is < 1 x ATR // - Exit conditions //// - Exit on exit indicator or when baseline or confirmation flip /////////////////////////////////////////////////// //Trades entries /////////////////////////////////////////////////// // - First entry L1 or S1 with standard SL and TP // - Second entry L2 or S2 with standard SL and exit upon the exit conditions /////////////////////////////////////////////////// //Included Indicators and settings /////////////////////////////////////////////////// // - Baseline = HMA 20 // - Confirmtion = SSL 10 // - Volume = TDFI 4 // - Exit = RVI 4 /////////////////////////////////////////////////// //Credits // Strategy causecelebre // TDFI causecelebre // SSL Channel ErwinBeckers ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
אסטרטגיית Pine Script®
מאת ‎jiehonglim‎
33