Apex IndicatorThe Apex Indicator is a physics-based momentum tool designed to measure the 2nd Derivative (Acceleration) of both Price and Volume.
Unlike standard oscillators which often lag, this indicator uses Kinematics to identify the subtle shifts in momentum before price makes a major move. It answers the critical questions: Is the selling pressure fading? and Is there fresh fuel (Volume) entering to support a turn?
This script uses Hull Moving Average (HMA) smoothing for low-latency calculation, and Z-Score Normalization to force Price and Volume onto a shared, readable scale.
Visual Guide
The Histogram (Price Acceleration)
Bright Green: Strong Bullish Acceleration (High Velocity).
Dark Green: Developing Bullish Momentum (or Waning Bullishness depending on context).
Bright Red: Strong Bearish Acceleration (Panic/Dump).
Dark Red: Developing Bearish Momentum (or Waning Bearishness).
The Line (Volume Acceleration)
Yellow: Volume is accelerating (Interest is entering).
Purple: Volume is decelerating (Interest is leaving).
The Background Highlights
Green/Red Background: These mark Statistical Extremes (>1 Standard Deviation). While these show maximum power, they often mark the climax of a move rather than the start.
How to Trade: Reading the Subtleties
The power of the Apex Indicator is not in chasing the spikes, but in reading the Transitions.
1. The Turn (The Reversal Entry)
Don't wait for the explosion; look for the "braking" action.
The Setup: Price has been moving down strongly (Bright Red bars).
The Signal: The histogram shifts to Dark Red and begins moving up toward the zero line (less negative). This means the selling acceleration is dying.
The Trigger: A Dark Green bar prints, accompanied by the Volume Line turning Yellow/Rising.
Why it works: You are entering when the bearish energy is exhausted and fresh volume is stepping in to lift the price, often before the main breakout occurs.
2. The Second Wind (Trend Continuation)
The Setup: You are already in a trend (Green bars), but the bars fade to Dark Green or near Zero (a pullback or pause).
The Trigger: The next bar flips Bright Green and the Volume Line spikes Yellow.
Why it works: This confirms that the pause was just a breather, and buyers are stepping back on the gas.
3. The "Hollow Move" (Trap Avoidance)
The Scenario: Price is moving up (Green bars), but the Volume Line is Purple or dropping.
Interpretation: This is a drift, not a drive. Without volume acceleration support, these moves are prone to rapid reversal.
4. The Climax (Exits)
If the Background flashes Green (Alert Trigger), be aware that price acceleration has hit a statistical extreme (Z-Score > 1).
If you are in a position, this is often a good place to Take Profit, as maintaining that level of acceleration is mathematically difficult for the market to sustain.
Settings
Analysis Length (21): The lookback period for the HMA smoothing.
Normalization Lookback (21): The historical window used to calculate the Z-Score. A setting of 21 allows the indicator to self-adjust quickly to recent volatility conditions.
אינדיקטורים ואסטרטגיות
Fanfans极简原版优化版### 中英文双语总结（300字内）
中文：该指标为Fanfans极简原版优化版，基于RSI和ATR构建核心交易信号，新增趋势（EMA）、成交量、时间、价格位置多维度过滤，及动态ATR倍数调整功能。含同方向订单间隔限制、多级止盈止损（支持阈值触发），内置信号质量评分、标签标注与警报推送，可自定义过滤规则和显示样式，通过多维度筛选降低无效信号，提升短周期交易信号准确性。
English: This is an optimized version of Fanfans' minimalist indicator, building core trading signals based on RSI and ATR. It adds multi-dimensional filters (trend/EMA, volume, time, price position) and dynamic ATR multiplier adjustment, includes same-direction order interval limits, multi-level SL/TP (supporting threshold triggers), built-in signal quality scoring, label annotation and alert push. Customizable filter rules and display styles reduce invalid signals via multi-dimensional screening, improving short-term trading signal accuracy.
Fanfans结构加强vwap版 + 极简系统### 中英文双语总结（300字内）
中文：该指标整合Fanfans结构、动态摆动VWAP、高斯GWMA、MACD及极简交易系统，支持趋势过滤（可选GWMA/VWAP/结构维度）、多离场模式（ATR止盈止损/GWMA离场/混合）与移动止损。具备多空信号标注、止损止盈线绘制、多维度共振警报，图表信息面板实时展示结构/VWAP/GWMA/MACD状态，可自定义过滤规则、显示样式及交易参数，适配短周期交易，兼顾趋势判断与信号执行的灵活性。
English: This indicator integrates Fanfans structure, dynamic swing VWAP, Gaussian GWMA, MACD and a simple trading system. It supports trend filtering (GWMA/VWAP/structure optional), multiple exit modes (ATR SL/TP, GWMA exit, hybrid) and trailing stop. Featuring long/short signal labeling, SL/TP line drawing, multi-dimensional resonance alerts, its chart info panel displays real-time status of structure/VWAP/GWMA/MACD. Customizable filter rules, display styles and trading parameters make it suitable for short-term trading, balancing trend judgment and signal execution flexibility.
Parabolic SAR📌 This indicator enhances the traditional Parabolic SAR trend-reversal system by incorporating adjustable strictness filtering based on candle structure, volume confirmation, volatility-based body size, and moving-average bias, enabling cleaner and more selective signals.
■ User Inputs
SAR Start / Increment / Max: Standard Parabolic SAR parameters controlling acceleration and sensitivity.
Strictness Level (1–10): Defines the filtering intensity applied to SAR crossover signals, where higher levels require stronger candle confirmation, higher volume thresholds, and trend-aligned price action relative to moving averages.
■ Base SAR Logic
The script calculates the Parabolic SAR using TradingView’s built-in ta.sar.
Two raw signals form the foundation:
Rising Base: Close crosses above sar.
Bearing Base: Close crosses below sar.
These are not used directly—filters refine them according to the chosen strictness level.
■ Filter Components
The script evaluates multiple market conditions:
Candle Direction:
candle_up = close > open, candle_down = close < open.
Volume Filter:
Volume greater than 10-period SMA.
Body Size Filter:
Normal body: |close-open| > ATR(14) × 0.2
Strong body: |close-open| > ATR(14) × 0.5
Trend Bias:
Price above/below SMA (20 or 50) depending on strictness level.
These elements combine to confirm signal strength and reduce noise.
■ Sensitivity Level Logic (1–10)
Each level progressively increases strictness:
Level 1: Pure SAR crossover only.
Level 2: SAR crossover + candle direction alignment.
Level 3: Adds volume confirmation.
Level 4: Adds minimum body-size requirement.
Level 5: Requires strong candle body + volume.
Level 6: Requires stronger volume (SMA20).
Level 7: Strong body + SMA20 volume confirmation.
Level 8: Strong body + high volume (SMA50).
Level 9: Adds trend bias:
Long = above SMA20
Short = below SMA20
Level 10 (Most Strict):
Very high volume (SMA100)
Strong body
Strong trend alignment (SMA50)
The higher the level, the less likely a breakout signal is to be seen.
■ Visualization
SAR Chart:
A green cross is displayed for an uptrend, and a red cross is displayed for a downtrend, or a custom setting is supported.
Signal Indicators:
Long-term: Green ▲ below the bar
Summary: Red ▼ above the bar
Markers are displayed by default, reflecting the filtered signal output,
or a custom setting is supported.
■ Purpose
This indicator is intended to:
Reduce SAR’s natural noise through strict filtering.
Provide tailored signal reliability based on trader preference.
Enhance candle-confirmation, volume-driven accuracy, and trend alignment.
It does not predict future price nor guarantee profitable trades—filters simply refine.
RSI 40-60 Range (30 Bars)RSI 40-60 Range (30 Bars) test for pine screenner for detec rsi 40-60 during 30 days
Fanfans结构+极简合并增强版V2
中文：该指标整合Fanfans结构、高斯GWMA、动态摆动VWAP、MACD及极简交易信号，内置结构/GWMA/VWAP/EMA多维度过滤、成交量确认、动态ATR等优化功能。支持多空信号标注、止损止盈分层设置、信号质量评分，搭配图表信息面板与多级别警报共振机制，适用于1分钟等短周期交易，兼顾信号灵敏度与准确性。
English: This indicator integrates Fanfans structure, Gaussian GWMA, dynamic swing VWAP, MACD, and simple trading signals. It features multi-dimensional filters (structure/GWMA/VWAP/EMA), volume confirmation, dynamic ATR optimization. Supporting long/short signal labeling, layered SL/TP settings, signal quality scoring, it comes with a chart info panel and multi-level alert resonance. Suitable for short-term trading (e.g., 1-minute timeframe), balancing signal sensitivity and accuracy.
PEG RSI [Auto EPS Growth]The PEG RSI is a hybrid indicator that combines fundamental valuation with technical momentum. It applies the Relative Strength Index (RSI) directly to the Price/Earnings-to-Growth (PEG) Ratio.
Unlike traditional PEG indicators that require manual input for growth rates, this script automatically calculates the Compound Annual Growth Rate (CAGR) of Earnings Per Share (EPS) based on historical data.
Key Features
- Auto-Calculated Growth: Uses historical TTM Earnings Per Share (EPS) to calculate the CAGR over a user-defined period (Default: 4 years).
- Dynamic Valuation: Converts the static PEG ratio into an oscillator (RSI) to identify relative valuation extremes.
- Trend & Momentum: Visualizes the momentum of the PEG ratio relative to its own history.
Educational Case Study
This indicator is designed for educational purposes and research. Instead of relying on fixed overbought or oversold levels, users are encouraged to study the correlation between the PEG RSI and price action independently.
- Observe how the price reacts when the PEG RSI reaches upper or lower extremes.
- Different stocks may respect different RSI zones based on their growth stability.
- Use this tool to analyze how market valuation momentum shifts over time.
Settings:
- Years for CAGR Growth: Timeframe to calculate EPS growth (Default: 4 years).
- RSI Length: Lookback period for the RSI calculation (Default: 14).
Note: This indicator works best on stocks with a consistent history of earnings. It requires financial data to function (will not work on assets without EPS like Crypto or Forex).
RSS - Reversal Score System v3 [Rulph]OVERVIEW
(Russian version below)
The Reversal Score System v3 (RSS3) is a sophisticated multi-component indicator designed to identify potential market reversal zones by combining volatility pressure analysis, trend momentum measurement, and divergence detection. The system generates a normalized score ranging from -1 (bullish) to +1 (bearish), with visual cloud overlays highlighting high-probability reversal areas. RSS3 integrates multi-timeframe confirmation and adaptive divergence filtering to reduce false signals in strong trends.
CORE COMPONENTS
Volatility Pressure Index (VPI)
VPI measures volatility expansion and price compression by combining:
• RSI distance from neutral (50) to gauge momentum deviation
• Annualized volatility estimation (VIX-style) to detect stress
• Normalized candle range relative to historical volatility
• Bollinger Bands position for price extension analysis
Higher VPI values indicate overbought conditions with volatility pressure, while lower values suggest oversold compression with potential for reversal.
Trend Direction Force Index (TDFI)
TDFI quantifies directional momentum strength by analyzing:
• Divergence between fast (MMA) and slow (SMMA) moving averages
• Average momentum (impetus) between the two moving averages
• Normalized power-weighted trend force
Positive TDFI indicates strong uptrend momentum, negative values indicate downtrend force. Extreme values (>0.7 or <-0.7) trigger impulse signals.
Divergence Detection System
The indicator automatically detects classical and hidden divergences for both VPI and TDFI:
• Bullish divergences: price makes lower low while indicator makes higher low
• Bearish divergences: price makes higher high while indicator makes lower high
• Divergence bonus decays over time (customizable decay period)
• Amplitude-weighted strength multiplier
• Sequential divergence counter for confirmation
Multi-Timeframe Filter (MTF)
Optional higher timeframe analysis helps filter low-probability reversals:
• Off mode : No filtering applied
• Reduce mode : Lowers divergence bonus when counter-trend to HTF (30% reduction)
• Block mode : Completely hides divergence markers against strong HTF trend
MTF calculates VPI and TDFI on higher timeframe and blends scores based on MTF weight parameter.
FINAL SCORE CALCULATION
The final score combines:
Score = (VPI_weight × VPI) + (TDFI_weight × TDFI) - Bull_Div_Bonus + Bear_Div_Bonus
When MTF is enabled:
Final_Score = (1 - MTF_weight) × Base_Score + MTF_weight × MTF_Score
VISUAL FEATURES
Adaptive Score Clouds
Dynamic colored zones appear above/below price when reversal conditions strengthen:
• Green cloud below price : Bullish reversal zone (score < bullish threshold)
• Red cloud above price : Bearish reversal zone (score > bearish threshold)
• Cloud height : Proportional to signal strength (3× ATR maximum)
• Transparency : Decreases with stronger signals (90% weak → 50% strong)
• Threshold mode : Clouds appear only when thresholds exceeded
• Gradient mode : Clouds show accumulation from any score value
Divergence Markers
Triangle markers indicate detected divergences:
• Green/Lime triangles below price: Bullish divergences (lime = both VPI+TDFI)
• Red/Maroon triangles above price: Bearish divergences (maroon = both VPI+TDFI)
• Gray markers: Filtered divergences (when MTF filter is active)
• Offset by pivot lookback period for accuracy
Momentum Impulses
Optional arrow markers highlight strong momentum breakouts:
• Blue arrows down: Bearish momentum impulse
• Orange arrows up: Bullish momentum impulse
Info Table
Real-time statistics display in top-right corner:
• Current final score with color coding
• Individual VPI and TDFI values
• Active divergence bonuses (Bull/Short)
• MTF trend status (when enabled)
• Current filter mode
HOW TO USE
For Reversal Trading
1 — Wait for score to cross bullish threshold (<-0.5) for potential long entries or bearish threshold (>0.5) for shorts
2 — Confirm with divergence markers appearing simultaneously
3 — Look for cloud formation strengthening the signal
4 — Use MTF filter to avoid counter-trend trades
For Trend Continuation
• Impulse arrows indicate strong momentum continuation
• Use as confirmation when trading in direction of established trend
• MTF alignment provides additional confidence
For Multi-Timeframe Analysis
• Enable MTF filter and set higher timeframe (e.g., 4H on 1H chart, Daily on 4H chart)
• Use "Reduce" mode for conservative approach
• Use "Block" mode for strict trend alignment
PARAMETERS GUIDE
Score Group
• VPI Weight (0.5): Balance between volatility and trend components. Increase for volatility-focused signals.
• TDFI Weight (0.5): Balance between volatility and trend components. Increase for trend-focused signals.
• Divergence Bonus Max (0.3): Maximum contribution of divergences to score. Higher = stronger divergence impact.
Divergence Group
• Pivot Lookback (3): 2=aggressive/fast, 3=balanced, 5=conservative/slow
Multi TimeFrame Group
• Higher TF : Typically 4-16× current timeframe (e.g., 4H for 1H chart)
• MTF Weight (0.3): Influence of higher timeframe in final score
• Trend Filter Level (0.5): TDFI threshold defining "strong trend" on HTF
Visual Group
• Cloud Mode : Threshold (traditional) vs Gradient (continuous accumulation)
• Cloud Transparency : Base transparency for weak signals
Advanced Groups
Fine-tune indicator components for specific markets or timeframes. Default values work well for most assets. Increasing periods smooths signals but adds lag; decreasing periods increases sensitivity but may cause noise.
ALERTS
Six alert conditions available:
• Bullish Zone: Score crosses below bullish threshold
• Bearish Zone: Score crosses above bearish threshold
• Strong Bull Div: Both VPI+TDFI show bullish divergence (unfiltered)
• Strong Bear Div: Both VPI+TDFI show bearish divergence (unfiltered)
• Down Impulse: Bearish momentum breakout
• Up Impulse: Bullish momentum breakout
NOTES
• Works on all timeframes and asset classes (crypto, forex, stocks, indices)
• Best results on liquid markets with clear trend/reversal cycles
• Combine with price action, support/resistance, and risk management
• Divergences work best in ranging or weakening trend conditions
• Not a standalone trading system - use as confirmation tool
LIMITATIONS
• Like all indicators, RSS3 can generate false signals in choppy/sideways markets
• Divergence detection requires sufficient historical data (minimum 50-100 bars)
• MTF filter may reduce signal frequency significantly in "Block" mode
• Advanced parameters require understanding of underlying calculations
DISCLAIMER
This indicator is provided for informational and educational purposes only and does not constitute financial, investment, or trading advice. All trading involves risk, and past performance does not guarantee future results. Users are solely responsible for their own trading decisions and should conduct their own research or consult with a qualified financial advisor before making any investment decisions. The author assumes no liability for any losses incurred through the use of this indicator.
═════════════════════════════════════════════════════════════════════════
© Rulph - Reversal Score System v3
ОБЗОР
Reversal Score System v3 (RSS3) — это многокомпонентный индикатор для выявления зон потенциального разворота рынка, объединяющий анализ давления волатильности, измерение силы тренда и обнаружение дивергенций. Система генерирует нормализованный скор от -1 (бычий) до +1 (медвежий) с визуальными облаками, выделяющими зоны высокой вероятности разворота. RSS3 интегрирует подтверждение с высшего таймфрейма и адаптивную фильтрацию дивергенций для снижения ложных сигналов в сильных трендах.
ОСНОВНЫЕ КОМПОНЕНТЫ
Индекс давления волатильности (VPI)
VPI измеряет расширение волатильности и ценовое сжатие, комбинируя:
• Отклонение RSI от нейтрального уровня (50) для оценки моментума
• Оценку годовой волатильности (VIX) для определения стресса
• Нормализованный диапазон свечей относительно исторической волатильности
• Положение относительно полос Боллинджера для анализа растяжения цены
Высокие значения VPI указывают на перекупленность с давлением волатильности, низкие значения — на перепроданность со сжатием и потенциалом разворота.
Индекс силы направления тренда (TDFI)
TDFI количественно оценивает силу направленного моментума через анализ:
• Расхождения между быстрой (MMA) и медленной (SMMA) скользящими средними
• Среднего моментума (импульса) между двумя скользящими
• Нормализованной силы тренда с весовым коэффициентом
Положительный TDFI указывает на сильный восходящий моментум, отрицательные значения — на нисходящую силу. Экстремальные значения (>0.7 или <-0.7) вызывают импульсные сигналы.
Система обнаружения дивергенций
Индикатор автоматически обнаруживает классические и скрытые дивергенции для VPI и TDFI:
• Бычьи дивергенции: цена формирует более низкий минимум, индикатор — более высокий минимум
• Медвежьи дивергенции: цена формирует более высокий максимум, индикатор — более низкий максимум
• Бонус дивергенции затухает со временем (настраиваемый период затухания)
• Множитель силы, взвешенный по амплитуде
• Счётчик последовательных дивергенций для подтверждения
Мультитаймфреймовый фильтр (MTF)
Опциональный анализ высшего таймфрейма помогает отфильтровать развороты с низкой вероятностью:
• Режим Off : Фильтрация не применяется
• Режим Reduce : Снижает бонус дивергенции при контр-тренде к HTF (на 30%)
• Режим Block : Полностью скрывает маркеры дивергенций против сильного тренда HTF
MTF рассчитывает VPI и TDFI на высшем таймфрейме и смешивает скоры на основе параметра MTF weight.
РАСЧЁТ ФИНАЛЬНОГО СКОРА
Финальный скор объединяет:
Скор = (Вес_VPI × VPI) + (Вес_TDFI × TDFI) - Бонус_бычьей_див + Бонус_медвежьей_див
При включённом MTF:
Финальный_скор = (1 - Вес_MTF) × Базовый_скор + Вес_MTF × MTF_скор
ВИЗУАЛЬНЫЕ ФУНКЦИИ
Адаптивные облака скора
Динамические цветные зоны появляются выше/ниже цены при усилении условий разворота:
• Зелёное облако под ценой : Бычья зона разворота (скор < бычьего порога)
• Красное облако над ценой : Медвежья зона разворота (скор > медвежьего порога)
• Высота облака : Пропорциональна силе сигнала (максимум 3× ATR)
• Прозрачность : Уменьшается при усилении сигнала (90% слабый → 50% сильный)
• Режим Threshold : Облака появляются только при превышении порогов
• Режим Gradient : Облака показывают накопление от любого значения скора
Маркеры дивергенций
Треугольные маркеры указывают на обнаруженные дивергенции:
• Зелёные/лаймовые треугольники под ценой: Бычьи дивергенции (лайм = обе VPI+TDFI)
• Красные/бордовые треугольники над ценой: Медвежьи дивергенции (бордо = обе VPI+TDFI)
• Серые маркеры: Отфильтрованные дивергенции (когда активен MTF-фильтр)
• Смещение на период pivot lookback для точности
Импульсы моментума
Опциональные стрелки выделяют сильные импульсные прорывы:
• Синие стрелки вниз: Медвежий импульс моментума
• Оранжевые стрелки вверх: Бычий импульс моментума
Информационная таблица
Статистика в реальном времени в правом верхнем углу:
• Текущий финальный скор с цветовой кодировкой
• Отдельные значения VPI и TDFI
• Активные бонусы дивергенций (Bull/Short)
• Статус тренда MTF (при включении)
• Текущий режим фильтра
КАК ИСПОЛЬЗОВАТЬ
Для торговли на разворотах
1 — Дождитесь пересечения скором бычьего порога (<-0.5) для потенциальных лонгов или медвежьего порога (>0.5) для шортов
2 — Подтвердите одновременным появлением маркеров дивергенций
3 — Ищите формирование облака, усиливающего сигнал
4 — Используйте MTF-фильтр для избегания контр-трендовых сделок
Для продолжения тренда
• Импульсные стрелки указывают на сильное продолжение моментума
• Используйте как подтверждение при торговле в направлении установленного тренда
• Выравнивание MTF даёт дополнительную уверенность
Для мультитаймфреймового анализа
• Включите MTF-фильтр и установите высший таймфрейм (например, 4H на графике 1H, Daily на 4H)
• Используйте режим "Reduce" для консервативного подхода
• Используйте режим "Block" для строгого выравнивания по тренду
РУКОВОДСТВО ПО ПАРАМЕТРАМ
Группа Score
• VPI Weight (0.5): Баланс между компонентами волатильности и тренда. Увеличьте для сигналов, ориентированных на волатильность.
• TDFI Weight (0.5): Баланс между компонентами волатильности и тренда. Увеличьте для сигналов, ориентированных на тренд.
• Divergence Bonus Max (0.3): Максимальный вклад дивергенций в скор. Выше = сильнее влияние дивергенций.
Группа Divergence
• Pivot Lookback (3): 2=агрессивно/быстро, 3=сбалансированно, 5=консервативно/медленно
Группа Multi TimeFrame
• Higher TF : Обычно в 4-16 раз больше текущего таймфрейма (например, 4H для графика 1H)
• MTF Weight (0.3): Влияние высшего таймфрейма в финальном скоре
• Trend Filter Level (0.5): Порог TDFI, определяющий "сильный тренд" на HTF
Группа Visual
• Cloud Mode : Threshold (традиционный) vs Gradient (непрерывное накопление)
• Cloud Transparency : Базовая прозрачность для слабых сигналов
Группы Advanced
Тонкая настройка компонентов индикатора для конкретных рынков или таймфреймов. Значения по умолчанию хорошо работают для большинства активов. Увеличение периодов сглаживает сигналы, но добавляет задержку; уменьшение периодов увеличивает чувствительность, но может вызвать шум.
АЛЕРТЫ
Доступны шесть условий для алертов:
• Bullish Zone: Скор пересекает бычий порог снизу вверх
• Bearish Zone: Скор пересекает медвежий порог сверху вниз
• Strong Bull Div: Обе VPI+TDFI показывают бычью дивергенцию (не отфильтровано)
• Strong Bear Div: Обе VPI+TDFI показывают медвежью дивергенцию (не отфильтровано)
• Down Impulse: Медвежий импульсный прорыв
• Up Impulse: Бычий импульсный прорыв
ПРИМЕЧАНИЯ
• Работает на всех таймфреймах и классах активов (крипто, форекс, акции, индексы)
• Лучшие результаты на ликвидных рынках с чёткими циклами тренд/разворот
• Комбинируйте с price action, уровнями поддержки/сопротивления и риск-менеджментом
• Дивергенции лучше всего работают в условиях флэта или ослабления тренда
• Не является самостоятельной торговой системой - используйте как инструмент подтверждения
ОГРАНИЧЕНИЯ
• Как все индикаторы, RSS3 может генерировать ложные сигналы в изменчивых/боковых рынках
• Обнаружение дивергенций требует достаточного объёма исторических данных (минимум 50-100 баров)
• MTF-фильтр может значительно снизить частоту сигналов в режиме "Block"
• Продвинутые параметры требуют понимания базовых расчётов
ДИСКЛЕЙМЕР
Данный индикатор предоставляется исключительно в информационных и образовательных целях и не является финансовой, инвестиционной или торговой рекомендацией. Любая торговля сопряжена с риском, и прошлые результаты не гарантируют будущей доходности. Пользователи несут полную ответственность за свои торговые решения и должны провести собственное исследование или проконсультироваться с квалифицированным финансовым консультантом перед принятием инвестиционных решений. Автор не несёт ответственности за любые убытки, понесённые в результате использования данного индикатора.
═════════════════════════════════════════════════════════════════════════
© Rulph - Reversal Score System v3
TRI - Multi-Timeframe FVGTRI - MULTI-TIMEFRAME FAIR VALUE GAPS v1.0.0
DESCRIPTION:
Advanced multi-timeframe Fair Value Gap (FVG) indicator that displays FVG zones from higher timeframes
on your current chart. Supports automatic or manual timeframe selection with comprehensive visualization
and alert system.
KEY FEATURES:
Multi-timeframe FVG detection - view FVG from any higher timeframe
Automatic timeframe selection - configure different FVG timeframes for each chart timeframe
Automatic mitigation detection - zones change color when price mitigates them
Configurable FVG threshold - filter out small gaps
Customizable visualization - colors, borders, labels, text colors
Smart zone inclusion - larger zones automatically remove smaller included zones
Memory efficient - automatic cleanup of expired zones
HOW IT WORKS:
A Fair Value Gap (FVG) is detected when there's a 3-candle pattern with a gap between candle 1 and
candle 3, indicating institutional order flow imbalances. Bullish FVG occurs when candle 3's low is
above candle 1's high (gap up), creating a demand zone shown in green. Bearish FVG occurs when candle
3's high is below candle 1's low (gap down), creating a supply zone shown in red.
The indicator uses request.security() to fetch data from the selected higher timeframe, detects FVG
patterns on that timeframe, and displays them on your current chart. FVG zones remain active until
price closes through them (mitigation), then change color and remain visible for a configurable
number of bars before disappearing.
TIMEFRAME CONFIGURATION:
Configure different FVG timeframes based on current chart timeframe:
1m-5m charts → Default 4h FVG
15m charts → Default 4h FVG
30m-1h charts → Default 4h FVG
4h charts → Default 4h FVG
Daily charts → Default Daily FVG
Weekly charts → Default Weekly FVG
Monthly charts → Default Monthly FVG
All timeframes are configurable via input settings.
BEST USE:
Works on all timeframes and asset classes. Particularly useful for intraday traders who want to see
higher timeframe FVG zones on their lower timeframe charts. FVG zones often act as support/resistance
and are frequently filled by price returning to rebalance the imbalance. Use them to identify potential
entry/exit points, stop-loss placement, and institutional order flow areas.
3SPC Setup indicator3SPC Setup Indicator — Trend & Structure Confirmation Tool
The 3SPC Setup Indicator helps traders detect potential trend shifts and continuation phases using a clean 3-step confirmation process. It analyzes market structure to identify transitions between bullish and bearish conditions and visually highlights these phases directly on the chart.
How It Works
Structure Break (SB): Detects a break of a key structural point, signaling possible trend change.
Pullback Confirmation: Confirms intention by identifying whether price respects the new structural direction.
Continuation Phase: Marks potential continuation of the identified bullish or bearish trend.
Features
• Automatic detection of structure shifts
• Clear bullish/bearish continuation labels
• Color-coded trend phases
• Works on all markets and timeframes
• Simple, clean interface for fast decision-making
How to Use
• Apply to any symbol or timeframe
• Green labels indicate potential bullish continuation
• Red labels indicate potential bearish continuation
• Use as part of a broader confirmation strategy
• Always combine signals with proper risk management
Persian Description (Optional)
اندیکاتور 3SPC Setup با بررسی ساختار بازار، سه مرحله شکست ساختار، پولبک و ادامه روند را تشخیص میدهد و فازهای صعودی و نزولی را با رنگبندی نمایش میدهد. این ابزار در تمام تایمفریمها و بازارها قابل استفاده است و برای خوانایی بهتر، سیگنالها را ساده و قابل فهم نشان میدهد.
Notes
This tool provides no financial advice. Use at your own discretion and always manage your risk
Qullamaggie 3★ / 4★ / 5★ Setup Detector (Clean, Colored Labels)Qullamaggie 3★ / 4★ / 5★ Setup Detector (Clean, Colored Labels)-Thaha
cảnh báo Khi Nến M15 Đóngtoday timeframe today timeframe today timeframe today timeframe today timeframe
ICT Killzone & Liquidity Sweep DetectorICT Killzone & Liquidity Sweep Detector
A powerful and clean ICT/SMC tool that combines:
• Accurate Killzone session boxes (Asia, London, NY AM, NY Lunch, NY PM) with customizable time & colors
• Real-time High/Low pivot lines from each killzone
• Smart Liquidity Sweep Detection with visual "Turtle on Fire" emoji when price wicks into old highs/lows without closing beyond them
• Automatic pivot mitigation: lines stop extending when price closes beyond the level (body break) or when swept by wick
• Optional midpoint lines of each killzone
• Extend pivots: "Until Mitigated" (default) or "Past Mitigation"
• Choose to extend only the most recent session or all sessions
• Built-in alerts when a killzone high or low is broken by close
• Session limit & timeframe filter to keep the chart clean
• Fully customizable colors, labels, line styles, transparency, and text
Features:
• Timezone support (default New York – auto handles DST)
• Works perfectly on all timeframes (recommended ≤ 30m for best visuals)
• Smart drawing cleanup – only keeps the last N sessions (default 8)
• High performance with proper array management
Perfect for traders following ICT concepts such as:
- Killzone trading
- Order block / FVG confirmation after liquidity sweeps
- Judas Swing detection
- Market structure shifts after raid on old highs/lows
One of the cleanest and most accurate public ICT Killzone + Liquidity Sweep indicators available on TradingView.
Enjoy responsibly
Multi-Timeframe Price Zones📌Multi-Timeframe Price Zones
This indicator plots dynamic multi-timeframe price zones—including previous highs/lows, pivot levels, and magnetic support/resistance regions—using auto-updating boxes on the chart, allowing traders to identify high-influence price areas across higher timeframes with clarity and precision.
■ Magnetic Zones 1 – Inputs
Timeframe: Selects the higher timeframe used for generating zones (e.g., D, W, M).
Show Last: Defines how many of the most recent timeframe zones to display.
PDHL: Toggles previous-day-high/low zones.
P: Toggles the pivot level (previous period midpoint).
SR1 / SR2: Enables two sets of magnetic support/resistance zones based on volatility expansion multipliers.
Sub Color: Sets the primary color used for box borders, backgrounds, and text.
■ General Zone Settings
Box Transparency: Adjusts opacity of filled price zones.
Border Style: Selects border style (solid, dashed, dotted).
Text Size: Controls label sizing for zone annotations.
Text Alignment: Positions labels inside boxes (left, center, right).
■ Data Retrieval Logic
The script pulls higher-timeframe timestamps and close times (time, time_close) using request.security, ensuring boxes start exactly at the beginning of the selected timeframe and extend to its closing bar.
A helper function retrieves any higher-timeframe price series (high, low, midpoint, and magnetic zone values).
■ Magnetic Zone Calculation
The script computes magnetic support/resistance levels using previous-bar volatility:
prev_hl_diff = previous high − previous low
Resistance = hl2 + (multiplier × prev_hl_diff)
Support = hl2 − (multiplier × prev_hl_diff)
Two multipliers are used:
0.236 → SR1
0.786 → SR2
These create responsive zones that expand/shrink with volatility.
■ Buffer Zone Expansion
Each level generates a “buffer zone”—a small band above/below the main value—to create visually meaningful zones rather than a single flat line:
top = level + range/8
bottom = level − range/8
Buffers are applied symmetrically around each SR level.
■ Zone Types Displayed
1. PDHL Zones (Previous High / Previous Low)
Retrieved directly from the selected higher timeframe’s last completed bar.
2. Pivot Zone (P)
Based on midpoint (hl2) of the previous period.
3. Magnetic Zones SR1 / SR2
Volatility-based resistance/support zones with buffer expansion.
■ Box Rendering System
The script uses a generalized draw_box() function that draws labeled rectangles using:
timeframe start/end timestamps
top/bottom price boundaries
custom background transparency
border style and width
optional price annotations
All box references are stored in arrays for proper management and future cleanup.
■ Auto-Updating Logic
Whenever the higher timeframe changes (timeframe.change()):
New boxes are created for SR1, SR2, pivot, and PDHL levels.
Boxes extend from the higher timeframe’s opening timestamp to its closing timestamp.
Price labels include the exact value and the timeframe abbreviation.
This ensures zones remain aligned with the boundaries of each higher-timeframe candle.
■ Purpose
This indicator is designed to:
Highlight multi-timeframe price zones such as PDHL, pivots, and magnetic SR ranges.
Provide contextual support/resistance from a higher timeframe while trading lower timeframes.
Visualize volatility-driven price zones that often act as reaction levels.
Draw clean, well-structured, auto-refreshing boxes with customizable styling.
It does not attempt to predict price or generate trade signals—its function is structural visualization.
■ Notes
Zones update only when the higher timeframe completes.
Buffer zones visually emphasize areas of interest rather than single price lines.
Transparency and styling allow integration into any chart layout.
Raja's SMC Order Blocks Display [PRO]Raja's SMC Order Blocks Display - Complete Description
🌟 A Message from Raja Saien
This indicator has been crafted with dedication, countless hours of research, and deep passion for trading excellence. Raja Saien has poured his heart and soul into creating this powerful tool to help YOU succeed in the markets.
For Everyone Starting Their Trading Journey:
If you're new to trading, remember - every expert was once a beginner. This indicator is your gateway to understanding how institutional money moves in the markets. Raja Saien believes in YOUR potential to learn, grow, and achieve financial freedom through smart trading.
The path to success requires:
✨ Dedication to learning the craft
💪 Patience during the learning curve
🎯 Consistent practice with the right tools
🚀 Belief in your ability to master the markets
This isn't just an indicator - it's a mentor on your chart, showing you where the smart money is positioned. With hard work and this tool in your arsenal, you can transform your trading and your life.
Remember: The markets reward those who prepare, practice, and persist. Raja Saien has given you the tool - now it's your turn to commit to the journey!
Overview
This is an advanced TradingView indicator that identifies and displays Smart Money Concepts (SMC) and Order Blocks. It's designed for professional traders who want to understand institutional trading patterns and market structure.
Main Features
1. Smart Money Concepts (SMC) Detection
ZigZag Pattern Recognition: Identifies market structure using pivot highs and lows
Break of Structure (BOS): Detects when price breaks through important structural levels
Change of Character (CHoCH): Identifies trend reversals and shifts in market sentiment
Configurable Length: Adjustable ZigZag sensitivity (default: 5 bars)
2. Order Blocks (OB)
Order blocks are zones where institutional investors have placed large orders. The indicator identifies two types:
Bullish Order Blocks:
Created when market shifts from bearish to bullish
Marks the last bearish candle before the structure break
Displayed in green/teal color
Represents potential support zones where price may bounce
Looks back 10 bars to find the lowest bearish candle
Bearish Order Blocks:
Created when market shifts from bullish to bearish
Marks the last bullish candle before the structure break
Displayed in red color
Represents potential resistance zones where price may reject
Looks back 10 bars to find the highest bullish candle
3. Order Block Management
Dynamic Extension: Active order blocks extend forward on the chart
Mitigation Detection: Automatically detects when price fully breaks through an order block
Bullish OB mitigated when close drops below the bottom
Bearish OB mitigated when close rises above the top
Visual Feedback: Mitigated blocks turn gray and are labeled "Mitigated"
Auto-cleanup: Removes mitigated order blocks from active tracking
4. Moving Averages Suite
Includes multiple trend indicators for comprehensive analysis:
Fast EMA (default 9): Yellow line - captures short-term momentum
Slow EMA (default 21): Purple line - identifies medium-term trends
EMA 50: Orange line - major trend filter
SMA 200: Blue line - long-term trend and institutional reference point
All EMAs support multiple source options: Open, High, Low, Close, HL2, HLC3, OHLC4
Customization Options
SMC Settings
ZigZag Length: Control sensitivity of structure detection (2-100)
Show Order Blocks: Toggle order block display on/off
Visual Settings
Bullish Color: Customize color for bullish order blocks (default: teal #089981)
Bearish Color: Customize color for bearish order blocks (default: red #f23645)
Transparency: Order blocks displayed with 80% transparency for better chart visibility
EMA Settings
Fast EMA Length: Adjustable period (default: 9)
Slow EMA Length: Adjustable period (default: 21)
Source Selection: Choose calculation source for each EMA
Toggle EMA 50: Show/hide the 50-period EMA
Toggle SMA 200: Show/hide the 200-period SMA
How It Works
Structure Detection Process
Identifies pivot highs and lows based on specified length
Creates ZigZag lines connecting significant swing points
Tracks current trend direction (bullish/bearish/neutral)
Monitors for structural breaks that signal trend changes
Order Block Creation
When price breaks above a previous high (bullish BOS):
Scans last 10 bars for the lowest bearish candle
Creates bullish order block at that candle's range
Marks it as active support zone
When price breaks below a previous low (bearish BOS):
Scans last 10 bars for the highest bullish candle
Creates bearish order block at that candle's range
Marks it as active resistance zone
Order Block Lifecycle
Active: Box extends forward with colored border and background
Tested: Price can interact with the zone multiple times
Mitigated: Once price closes through the zone, marked as invalidated
Removed: Automatically cleaned up after mitigation
Trading Applications
Entry Strategies
Pullback Entries: Wait for price to return to an active order block
Confirmation: Look for bullish price action at bullish OBs, bearish at bearish OBs
EMA Confluence: Stronger setups when OBs align with EMA levels
Risk Management
Stop Loss: Place stops just beyond the order block boundary
Invalidation: Exit if order block gets mitigated
Multiple Timeframes: Check OBs on higher timeframes for stronger zones
Trend Analysis
EMA Alignment: All EMAs pointing same direction = strong trend
EMA 50 Test: Key level for trend continuation/reversal
SMA 200: Major institutional reference point
Technical Specifications
Max Boxes: 500 (sufficient for most chart timeframes)
Max Lines: 500
Max Labels: 500
Overlay: True (draws directly on price chart)
Version: Pine Script v5
Best Practices
Use on liquid markets (forex, major stocks, crypto)
Combine with volume analysis for confirmation
Higher timeframes produce more reliable order blocks
Wait for clear structure breaks before trusting new OBs
Don't trade against the major trend (SMA 200 direction)
Use multiple confirmations before entering trades
Limitations
Works best in trending markets with clear structure
May produce false signals in ranging/choppy conditions
Requires understanding of Smart Money Concepts
Not a standalone trading system - use with proper risk management
Historical order blocks don't guarantee future reactions
RiskON/RiskOff Ratio CombinedRiskON/RiskOff Ratio Combined Indicator
This indicator provides a comprehensive view of market risk appetite by analyzing the ratio between a proprietary risk-on asset and a risk-off benchmark. It helps traders identify shifts in market sentiment, potential bullish or bearish momentum, and correlations with key assets like Bitcoin, all while adapting to different timeframes for reliable signals.
How It Works
The core of the indicator is a dynamic ratio calculated from selected market proxies. This ratio is smoothed using an adaptive moving average that adjusts its length based on the chosen timeframe or a fixed resolution mode, ensuring consistency across charts and handling gaps during market closures. The difference between the raw ratio and its moving average is normalized to a scale between -1 and 1, allowing for clear interpretation of market strength.
Normalization uses a lookback period to scale deviations dynamically, preventing extreme values from skewing readings.
Signals are generated based on confirmed crosses or momentum shifts, with options for fixed-resolution confirmation to avoid false positives during intraday volatility.
Additionally, it incorporates Bitcoin correlation analysis against a user-selected reference (S&P 500 or Nasdaq 100 proxy) and gold, using daily returns over a customizable period. This helps detect decorrelation periods where the indicator's reliability might be affected, with color-coded warnings.
Inputs
Use Fixed Resolution : Enable to use a consistent calculation timeframe (default: Daily) with gap handling for accuracy; disable for current chart timeframe.
Calculation Resolution : Timeframe for fixed mode (e.g., 'D' for daily).
Base MA Length : Starting length for the adaptive moving average (default: around 185 periods, adjustable).
Max MA Length : Upper limit for adaptation (default: high value to prevent overflow).
Use Color Gradient : Toggle between gradient colors (for nuanced sentiment) or simple bull/bear colors.
Show BTC Correlation : Display correlation metrics (default: enabled).
Bitcoin Ticker : Symbol for BTC (default: INDEX:BTCUSD).
Reference Asset : Choose between SPY (S&P 500) or QQQ (Nasdaq 100) for correlation.
Correlation Period : Days for calculation (default: 50).
Warning Threshold : Level for decorrelation alerts (default: 0.3).
Outputs and Display
Plots : The ratio line (colored based on direction), its adaptive moving average, and a fill area highlighting the normalized difference with gradient or signal-based colors.
Market State Table : Displays current sentiment as "STRONG BUY", "BUY", "NEUTRAL", "SELL", or "STRONG SELL" with thresholds, plus mode info and optional BTC correlations (with status like "RELIABLE", "CAUTION", "DECORR", or "INVERSE").
Alerts : Conditions for bullish/bearish signals and decorrelation warnings.
Usage
Add the indicator to any chart (e.g., major indices or crypto). Use it to gauge risk-on/off environments: positive normalized values suggest buying momentum, negative indicate selling pressure. Monitor correlations for Bitcoin-related strategies—low correlation may signal regime changes. Best on daily or higher timeframes for stability. Combine with other tools for confirmation.
Originality
This indicator uniquely combines a risk ratio with timeframe-adaptive smoothing, dynamic normalization, and integrated correlation checks, providing a multi-faceted risk assessment not found in standard tools. It evolves from traditional risk metrics by incorporating gap handling and confirmation logic for robustness across markets.
For invite-only access: Please contact me via TradingView private message with your use case to request an invitation. Access is granted selectively.
Notes
Past performance is not indicative of future results. This is not investment advice—use at your own risk.
Enhanced ONH / ONL Auto Levels (Fixed Alerts)This script automatically identifies and plots the Overnight High (ONH) and Overnight Low (ONL)—two of the most important liquidity levels for intraday futures and index traders.
The indicator scans the entire overnight session (default: 18:00–09:30 EST for ES) and records the highest wick and lowest wick formed during Globex. These levels are then projected into the regular trading session, giving traders clear reference points for potential reversals, breakouts, liquidity grabs, and high-probability retest setups.
ONH/ONL levels act as magnet zones, liquidity pockets, and institutional decision points—commonly targeted during the opening drive and London/New York overlap. Whether price sweeps, reclaims, or breaks these levels, the reaction often creates reliable trade opportunities for scalpers and day traders.
TRADE ORBIT:-TOP BOTTOM INDICATOR🔵 BUY TRADE (Bottom Reversal Entry)
Enter when the green triangle appears.
Stop Loss (SL)
Below the low of the signal candle
Or below the swing low (safer)
Target (TP)
Choose ANY:
3%–5% move
Next resistance level (red line)
Risk:Reward = 1:2 or 1:3
Position Size
Risk 2% of your capital per trade (written in rules box).
🔴 SELL TRADE (Top Reversal Entry)
Enter on the red triangle.
Stop Loss (SL)
Above the high of the signal candle
Or above swing high (safer)
Target (TP)
Choose any:
3%–5% downward move
Next support level (green line)
RR = 1:2 or 1:3
📊 BEST WAY TO USE
1. Use on 15m / 30m / 1h for intraday
2. Use on Daily for swing trading
3. Always trade WITH weekly trend (if enabled)
4. Combine with trendlines or EMA200 for extra accuracy
Multi-EMA Slope DashboardThis script provides a comprehensive dashboard displayed directly on the chart, allowing you to analyze the underlying trend using 8 Exponential Moving Averages (EMA) ranging from period 20 to 55.
Unlike classic indicators that simply check if the price is above or below the EMA, this tool analyzes the slope of each moving average to determine the true market dynamics.
The indicator calculates the status of 8 distinct EMAs (20, 25, 30, 35, 40, 45, 50, 55). For each EMA, the script determines the direction using the following logic:
Slope Calculation: It compares the current EMA value with its value 3 bars ago (variable nb_bougies).
Neutrality Threshold: To avoid false signals in ranging (flat) markets, a neutrality filter is applied (0.01% of the EMA value).
Dashboard Interpretation
The table is located at the top right of your screen and displays three columns:
EMA: The moving average period (e.g., 20, 55).
State:
H (Hausse / Up): The slope is positive and above the threshold.
B (Baisse / Down): The slope is negative and below the negative threshold.
N (Neutre / Neutral): The slope is weak, indicating no clear trend.
COL (Color): Quick visual indicator.
🔵 Blue: Bullish trend.
🟠 Orange: Bearish trend.
⚪ Gray: Neutral Trend / Ranging.
Trading Usage
Trend Confirmation: Use the "Totaux" (Totals) counter at the bottom of the table. If you see 8/8 H (Blue), the bullish trend is strong and aligned across all timeframes (short and medium term).
Reversal Detection: If fast EMAs (20, 25) turn Orange (B) while slow ones (50, 55) are still Blue (H), this may signal the beginning of a correction or a trend reversal.
DeM Trend Bias Strength with Alerts (RB Trading)This tool is built to help users understand trend direction, exhaustion, and momentum shifts on the daily timeframe. It highlights when a market is transitioning from weakness to strength or strength to weakness by displaying color-coded bias bars. The script does not forecast future outcomes and should be used as an analytical aid.
Intended Usage
• Timeframe: Daily
• Instruments: Works on most FX pairs and liquid markets
• Style: Trend and bias evaluation
• Purpose: Identify early signs of momentum recovery within ongoing trends
How It Works
Bias Rotation Engine
The script measures directional pressure and smooths it into a bar display that changes color as conditions shift.
• Green bars show rising strength conditions
• Red bars show declining strength conditions
• Transitional periods often appear near market turning points and consolidation zones
This helps users visually separate healthy directional trends from weakening phases.
Trend Alignment Filter
The bars are designed to be interpreted alongside moving averages or broader trend tools. When the bars turn higher while price respects an upward structure, it often supports continuation themes. When the bars weaken during downward phases, it highlights potential areas where the trend retains control.
Identifying Exhaustion and Recovery
Repeated cycles in the bar display can highlight areas where:
• Downside pressure is fading before an upswing
• Upside pressure is fading before a pullback
• Consolidation is forming before a breakout
These transitions tend to align with moments shown in the image where the arrows mark bias shifts occurring before price acceleration.
How to Use It
• Wait for a clear color rotation before making any decisions
• Confirm with the daily trend and price structure
• Avoid using the tool by itself for entries
• Combine with support and resistance, moving averages, and candle structure
• Not intended for scalping or intraday signals
Why Daily Chart Works Best
The daily timeframe smooths out noise and gives the strength bars enough data to reveal genuine trend transitions. Higher timeframes also reduce false rotations that are common in lower timeframes.
Notes
The script does not predict or guarantee price movement. It processes historical inputs to help the user understand directional conditions. Each trader should apply their own risk plan and confirm levels before acting on any idea.
ONH / ONL Auto LevelsThis script automatically detects and plots the Overnight High (ONH) and Overnight Low (ONL) for each trading day.
It scans the entire overnight/Globex session (default: 18:00–09:30 EST for ES futures) and records the highest and lowest prices formed during that period.
At the start of the regular trading session (RTH), ONH and ONL levels remain on the chart as key liquidity zones.
These levels are commonly used for:
• Identifying liquidity sweeps
• Opening drive reversals
• Break-and-retest setups
• VWAP + ON levels confluence
• Scalping on 1m–5m charts
The script updates automatically every day and draws clean, minimal levels suitable for intraday traders.
Time settings can be adjusted to match any market or instrument.
Fibonacci Volume Profile [Auto-Anchored & Dynamic]The Concept: Structure Meets Participation Traders often treat Market Structure (Fibonacci Retracements) and Market Participation (Volume) as separate tools. This indicator merges them into a single, cohesive system.
Standard Volume Profiles are often static or require manual placement. Standard Fibonacci tools show where price might reverse, but not how much effort was spent there. This script solves that by automatically anchoring a high-definition Volume Profile to your most recent market swing, giving you a dynamic view of volume distribution relative to Fibonacci structural zones.
How It Works This is not a simple "tick" volume profile. It is a custom-built, array-based engine that:
Identifies the Swing: Automatically scans the last X bars (user-defined) to find the absolute Swing High and Swing Low.
Anchors the Profile: Draws the Volume Profile precisely covering the time duration of that swing.
Calculates Distribution: Using a "Smart Fill" algorithm, it distributes volume across price rows without gaps, ensuring a solid, institutional-grade look even on steep trends.
Dynamic Scaling: The width of the profile is responsive. It occupies a percentage of the swing's duration, meaning it scales perfectly whether you are zooming in, zooming out, or dragging chart margins.
Key Features
Auto-Anchored: No need to manually draw "Fixed Range" tools. The script adapts as new highs/lows are made.
Smart Fill Technology: Eliminates the "barcode" effect seen in basic scripts. Price rows are filled continuously for a solid distribution curve.
Split Volume Analysis: Bars are dual-colored (Teal/Red by default) to visualize Buy (Up Candle) vs. Sell (Down Candle) volume composition at every price level.
Point of Control (POC): Automatically highlights the price level with the highest volume (The "King" line) in Red.
Responsive Geometry: The profile width is defined as a percentage of the swing itself. It breathes with the chart.
Garbage Collection: Optimized for performance. Old drawings are cleared instantly when the chart moves, preventing "ghost" drawings or lag.
Settings Guide
Lookback Length: How far back the script scans for the High/Low (Default: 200). Increase this for higher timeframes or longer trends.
Resolution: The number of rows in the profile. (Default: 100). Higher = smoother definition.
Width (% of Swing): Controls how wide the profile is relative to the trend duration. (Default: 40%).
Colors: Fully customizable Buy, Sell, and POC colors to match your dark/light theme.
Disclaimer This script is for informational and analytical purposes only. It visualizes past market data and does not constitute financial advice or a signal to trade.
