ST+ TP1-TP5 + CALL/PUT 1. The Indicator's General Concept
The indicator works by:
Using the Supertrend indicator to determine when a new trend (bullish or bearish) begins.
Once a new trend is detected:
It determines the entry price.
It calculates the stop-loss (SL).
It calculates five profit levels, TP1 to TP5.
It draws horizontal lines on the chart representing the entry, SL, TP1-TP5, with labels on the right side (as shown in the image).
It can also display a CALL or PUT symbol above the signal candle.
It tracks price movement to determine if a target has been reached or if the stop-loss has been hit.
2. The Inputs That Control the Indicator
You can modify these values according to your strategy:
ATR Length → The number of candles used to calculate volatility.
Supertrend Factor → Controls the sensitivity of the supertrend. (The higher the value, the fewer the signals.)
TP1 to TP5 → ATR multipliers to set targets.
SL → ATR multiplier to set stop loss.
Extend Bars → The distance the lines extend to the right before the bar.
Show CALL/PUT → Shows or hides the trend signal.
Show TP Flags → Enables or disables small TP flags above the candles.
3. Determining the Trend
The indicator uses Supertrend to determine:
Is the market in an uptrend or a downtrend?
If the trend changes from bearish to bullish, it registers a CALL signal.
If the trend changes from bullish to bearish, it registers a PUT signal.
The first candle at which this change occurs is called a reversal candle.
4. Calculating Levels
When a reversal candle occurs:
Entry price = closing price of the candle.
Stop Loss (SL):
For an uptrend = Price - ATR × Multiplier.
For a downtrend = Price + ATR × Multiplier.
Profit Levels (TP1, TP5):
If up → Price + ATR × (multipliers).
If down → Price - ATR × (multipliers).
5. Drawing Lines and Labels
Draws horizontal lines representing:
Entry (green)
SL (red)
TP1-TP5 (blue)
Places labels on the right side of the chart, as shown in the image:
Each label shows the price level.
The label reads: "TP1: 123.45" or "Entry: 120.00", etc.
The positions of the lines and labels are updated automatically with each new candle.
6. Showing CALL and PUT Signals
If the new trend is up, a green CALL label will appear above the reversal candle.
If the new trend is down, a red PUT label will appear above the reversal candle.
7. Target Tracking and Stop Loss
The indicator tracks each candle after the signal:
If the price touches one of the targets (TP1 to TP5):
It marks this target.
It stops tracking this target so that it does not repeat the signal.
If the price touches the Stop Loss (SL):
It closes the trade and stops tracking completely.
8. Blue Flags Option
There is an additional option:
If you enable it, a small blue flag will appear above or below the candle when any target is reached.
If you disable it, you won't see these flags; you'll just see the sidebars and labels.
9. Live and Dynamic Update
The indicator uses an automatic update every minute.
Ensures that all lines and labels remain fixed at the last candlestick of the analysis.
10. Trade Lifecycle
Wait for a reversal in a supertrend.
At the first reversal → set Entry/SL/TP1..TP5.
Draw lines and labels on the chart.
Monitor price action:
If any TP is met → mark it as met.
If the SL is reached → cancel the trade.
Wait for a new signal to begin a new cycle.
Conclusion
The indicator provides you with a complete visual trading system.
Defines entry points, stop-losses, and profit targets.
Everything is displayed on the chart with clear colored lines and labels.
Keeps targets organized and prevents duplicate signals.
Can be used on any timeframe or market.
אינדיקטורים ואסטרטגיות
INE-VISION-PRO🎯 PROFESSIONAL EMA200 RIBBON INDICATOR
✨ FEATURES:
• Colored ribbon between EMA200 High and EMA200 Close
• Automatic trend detection (price above/below)
• Customizable sources (High/Close adjustable)
• Fully configurable colors
• Intuitive interface
🎨 SMART COLORS:
• GREEN: Price above EMA200 (bullish trend)
• RED: Price below EMA200 (bearish trend)
• GRAY: Neutral position
🔧 PARAMETERS:
• Adjustable EMA200 length
• Customizable High/Close sources
• Organized color group
• Ribbon display on/off
💡 Perfect for visually identifying trend zones and potential reversals on all timeframes.
📈 Developed for inemployable.com community
liteon oem-1Moving Average Trend Strategy，A dual moving average strategy for trend judgment and analysis, suitable for multiple assets/instruments
فلتر EMA 20/50/200 - صعودي فقط//@version=5
indicator("فلتر EMA 20/50/200 - صعودي فقط", overlay=true)
// مدخلات
lenFast = input.int(20, "EMA Fast")
lenSlow = input.int(50, "EMA Slow")
lenTrend = input.int(200,"EMA 200")
// حساب المتوسطات
emaFast = ta.ema(close, lenFast)
emaSlow = ta.ema(close, lenSlow)
emaTrend = ta.ema(close, lenTrend)
// ميل EMA200
slopeBars = input.int(5, "عدد الشموع لميل EMA200")
emaTrendSlope = emaTrend - emaTrend
// شروط الفلتر
trendUp = close > emaTrend and emaFast > emaSlow and emaSlow > emaTrend and emaTrendSlope > 0
bullCross = ta.crossover(emaFast, emaSlow)
// إشارة الفلتر
longFilter = trendUp and bullCross
// عرض على الشارت
plot(emaFast, color=color.orange, title="EMA20")
plot(emaSlow, color=color.blue, title="EMA50")
plot(emaTrend, color=color.green, title="EMA200")
plotshape(longFilter, title="فلتر شراء", style=shape.labelup,
text="✅ فلتر صعودي", color=color.green, location=location.belowbar, size=size.tiny)
// إخراج بوول (للإكسيل أو فرز الرموز في Screener)
filterOutput = longFilter ? 1 : 0
plotchar(filterOutput, char="●", color=longFilter ? color.green : na, title="فلتر فعّال")
Bitcoin: The Golden Ratio Multiplier advanced with Z-scoreWhat this does: We took the classic Golden Ratio / 350DMA idea and ported it to TradingView, then standardized it with a single Z-score. The three core bands are the 350DMA multiples (1.0×, 1.6×, 2.0×). We define their Z values and add two outer bands to complete a 5-level scale:
0.625× 350DMA → Z = +2
1.0× 350DMA → Z = +1
1.6× 350DMA → Z = 0 (golden-ratio mid)
2.0× 350DMA → Z = −1
2.5× 350DMA → Z = −2
How the Z-score is computed:
We take the **price-to-350DMA ratio**, locate it **between the two nearest bands**, and then measure its **position on a log scale** (because the bands are multiplicative). That position is **linearly mapped** so each band-to-band step equals **1 Z unit**: 0.625×→1.0×→1.6×→2.0×→2.5× becomes **+2 → +1 → 0 → −1 → −2**. If price sits **outside** the outer bands, the Z-score simply **extends past ±2** (optionally clamped in settings). Positive Z means price is **below** the 1.6× mid; negative Z means it’s **above** the 1.6× mid.
High/Low Break last 3 candles with trend filterThe indicator generates a triangle symbol when the high/low of the last three candles has been exceeded or fallen below the close of the candle. Three EMAs (9, 21 and 50) are used as trend filters.
Note: I do not provide any guarantee or warranty. Use of the indicator is at your own risk. By using the indicator, you agree to this condition.
BE-Volume Footprint & Pressure Candles█ Overview:
BE-Volume Footprint & Pressure Candles, is an indicator which is preliminarily designed to analyze the supply and demand patterns based on Rally Base Rally (RBR), Drop Base Drop (DBD), Drop Base Rally (DBR) & Rally Base Drop (RBD) concepts in conjunction to volume pressure. Understanding these concepts are crucial. Let's break down why the "Base" is you Best friend in this context.
Commonness in RBR, DBD, DBR, RBD patterns ?
There is an impulse price movement at first, be it rally (price moving up) or the Drop (price moving down), followed by a period of consolidation which is referred as "BASE" and later with another impulse move of price (Rally or Drop).
Why is the Base Important
1. Market Balance: Base represents a balance between buyers and sellers. This is where decisions are made.
2. Confirmation: It confirms the strength of previous impulse move which has happened.
Base & the Liquidity Play:
Supply & Demand Zone predict the presence of all large orders within the limits of the Base Zone. Price is expected to return to the zone to fill the unfilled orders placed by large players.
For the price to move in the intended direction Liquidity plays the major role. hence indicator aims to help traders in identifying those zones where liquidity exists and the volume pressure helps in confirming that liquidity is making its play.
Bottom pane in the below snapshots is a visual representation of Buyers volume pressure (Green Line & the Green filled area) making the price move upwards vs Sellers volume pressure (Red Line & the Red filled area) making the price move downwards.
Top pane in the below snapshots is a visual representation on the pattern identification (Blue marked zone & the Blue line referred as Liquidity level)
Bullish Pressure On Buy Liquidity:
Bearish Pressure On Sell Liquidity:
█ How It Works:
1. Indicator computes technical & mathematical operations such as ATR, delta of Highs & Lows of the candle and Candle ranges to identify the patterns and marks the liquidity lines accordingly.
2. Indicator then waits for price to return to the liquidity levels and checks if Directional volume pressure to flow-in while the prices hover near the Liquidity zones.
3. Once the Volume pressure is evident, loop in to the ride.
█ When It wont Work:
When there no sufficient Liquidity or sustained Opposite volume pressure, trades are expected to fail.
█ Limitations:
Works only on the scripts which has volume info. Relays on LTF candles to determine intra-bar volumes. Hence, Use on TF greater than 1 min and lesser than 15 min.
█ Indicator Features:
1. StrictEntries: employs' tighter rules (rather most significant setups) on the directional volume pressure applied for the price to move. If unchecked, liberal rules applied on the directional volume pressure leading to more setups being identified.
2. Setup Confirmation period: Indicates Waiting period to analyze the directional volume pressure. Early (lesser wait period) is Risky and Late (longer wait period) is too late for the
ride. Find the quant based on the accuracy of the setup provided in the bottom right table.
3. Algo Enabled with Place Holders:
Indicator is equipped with algo alerts, supported with necessary placeholders to trade any instrument like stock, options etc.
Accepted PlaceHolders (Case Sensitive!!)
1. {{ticker}}-->InstrumentName
2. {{datetime}}-->Date & Time Of Order Placement
3. {{close}}-->LTP Price of Script
4. {{TD}}-->Current Level:
Note: Negative Numbers for Short Setup
5. {{EN}} {{SL}} {{TGT}} {{T1}} {{T2}} --> Trade Levels
6. {{Qty}} {{Qty*x}} --> Qty -> Trade Qty mapped in Settings. Replace x with actual number of your choice for the multiplier
7. {{BS}}-->Based on the Direction of Trade Output shall be with B or S (B == Long Trade & S == Short Trade)
8. {{BUYSELL}}-->Based on the Direction of Trade Output shall be with BUY or SELL (BUY == Long Trade & SELL == Short Trade)
9. {{IBUYSELL}}-->Based on the Direction of Trade Output shall be with BUY or SELL (BUY == SHORT Trade & SELL == LONG Trade)
Dynamic Alerts:
10. { {100R0} }-->Dynamic Place Holder 100 Refers to Strike Difference and Zero refers to ATM
11. { {100R-1} }-->Dynamic Place Holder 100 Refers to Strike Difference and -1 refers to
ATM - 100 strike
12. { {50R2} }-->Dynamic Place Holder 50 Refers to Strike Difference and 2 refers to
ATM + (2 * 50 = 100) strike
13. { {"ddMMyy", 0} }-->Dynamically Picks today date in the specified format.
14. { {"ddMMyy", n} }-->replace n with actual number of your choice to Pick date post today date in the specified format.
15. { {"ddMMyy", "MON"} }-->dynamically pick Monday date (coming Monday, if today is not Monday)
Note. for the 2nd Param-->you can choose to specify either Number OR any letter from =>
16. {{CEPE}} {{ICEPE}} {{CP}} {{ICP}} -> Dynamic Option Side CE or C refers to Calls and PE or P refers to Puts. If "I" is used in PlaceHolder text, On long entries PUTs shall be used
Indicator is equipped with customizable Trade & Risk management settings like multiple Take profit levels, Trailing SL.
Sessions — Asia / London / New York (shaded + start/end arrows)Asian Session London Session Newyork Session
- adjust time its in utc otherwise you will be trading random times
Session Highs & Lows — Customizable + HTF Wick Liquidity (H1/H4)Yesterdays ASIAN LONDON AND NEWYORK highs and Lows
Todays ASIAN LONDON AND NEWYORK highs and lows
1 HOUR AND 4 HOUR LIQ POINTS
Multi-Asset Trend Background [SwissAlgo]Multi-Asset Trend Background
---------------------------------------------------------
Purpose
This indicator colors the chart background green (uptrend) or red (downtrend) to show the broad phases of a selected asset or ratio (for example SP500, or Gold), regardless of the current ticker on the chart (for example BTC).
The aim is not to generate signals, but to show when the selected asset (such as SP500 or Gold) was in a sustained uptrend or downtrend, so you can compare another chart (for example BTC) against that backdrop.
It helps frame price action in context, highlighting how macro drivers often align with or diverge from other markets.
From mid-2016 to late-2017, the SP500 was in a clear uptrend — Bitcoin rallied strongly in the same period, showing alignment between equities and crypto risk-taking.
When Gold trended higher, the SP500 often weakened, reflecting their tendency to move inversely in longer cycles.
As HYG/TLT turned down in early 2020, QQQ also struggled — illustrating how credit risk appetite is linked to equity performance.
During periods of DXY strength, Gold frequently showed the opposite trend, consistent with the historical dollar–gold relationship.
When RSP/SPY trended down, rallies in the S&P 500 were driven by a narrow group of large-cap stocks, while a rising ratio indicated broad market participation.
---------------------------------------------------------
Why it May Help You
Provides context for asset correlations.
Helps identify whether a chart is moving with or against its macro environment.
Useful for cycle mapping and historical study of market phases.
Filters noise and emphasizes established trends rather than short swings.
---------------------------------------------------------
How it Works
You select an asset or ratio from a dropdown.
The script calculates a mid-term moving average, then measures its slope, slope change, and slope acceleration to quantify the trend’s direction and consistency.
A longer-term moving average filter defines whether the long-term backdrop is bullish or bearish.
Background Coloring rules:
Green = slope strongly positive in line with long-term uptrend, or downtrend showing constructive reversal signs.
Red = slope strongly negative in line with long-term downtrend, or uptrend showing weakening slope.
No shading = neutral or mixed conditions.
This slope-based approach avoids the limitations of simple MA crosses, aiming to capture broad, consistent trend phases across different assets, with a mid/long-term view.
---------------------------------------------------------
Assets You Can Select
EQUITIES – good reference to gauge risk appetite in financial markets
SP500 = broad benchmark. Uptrend = strength in US equities signalling risk-on conditions; downtrend = weakness, risk-off market phase.
NASDAQ = tech and growth stocks. Uptrend = technology/growth leadership, risk appetite; downtrend = tech underperformance and fading risk appetite.
DOW = industrial and value stocks. Uptrend = industrial/value strength/economic strength; downtrend = weakness in traditional sectors and potential economic downturn.
RUSSELL2000 = small caps. Uptrend = typical in risk-on environments and FOMO; downtrend = small-cap underperformance, "flight to safety".
COMMODITIES – proxies for inflation, industry, and safe-haven demand.
GOLD = safe-haven. Uptrend = defensive demand rising/risk-off/inflation fears; downtrend = weaker demand for safety.
SILVER = partly industrial, partly safe-haven. Uptrend = stronger industrial cycle, or precious metals demand and risk appetite.
COPPER = industrial barometer. Uptrend = stronger industrial activity; downtrend = economic slowdown concerns.
CRUDE OIL = energy prices. Uptrend = rising energy/inflation pressures; downtrend = weaker demand or supply relief.
NATURAL GAS = volatile energy prices. Uptrend = higher energy costs and inflation pressure; downtrend = easing energy conditions.
BONDS / FX – monetary policy, credit, and risk appetite signals.
TLT = long-term US bonds. Uptrend = falling yields (bond demand)/flight to safety; downtrend = rising yields (risk on)
HYG = high-yield credit. Uptrend = strong credit appetite; downtrend = risk aversion in credit markets.
DXY = US dollar index. Uptrend = dollar strength (weaker EUR, GBP, SEK, etc); downtrend = dollar weakness.
USDJPY = carry trade proxy. Uptrend = stronger USD vs JPY (risk appetite); downtrend = JPY strength (risk-off).
CHFUSD = Swiss franc. Uptrend = franc strength (defensive flow); downtrend = franc weakness.
YIELD INVERSION = US10Y–US02Y. Uptrend = curve steepening; downtrend = inversion deepening (higher recession risk).
HOME BUILDERS = US housing sector. Uptrend = housing sector strength (risk on); downtrend = weakness (risk off).
EURUSD = euro vs dollar. Uptrend = euro strength (risk appetite); downtrend = euro weakness (risk aversion).
CRYPTO – digital asset benchmarks.
BITCOIN = digital gold. Uptrend = BTC strength; downtrend = BTC weakness.
CRYPTO_TOTAL = entire crypto market cap. Uptrend = broad crypto growth; downtrend = contraction.
CRYPTO_ALTS = altcoin market cap. Uptrend = altcoin expansion (often “alt season”); downtrend = contraction.
RATIOS – relative measures to extract macro signals.
COPPER/BTC = compares industrial cycle vs Bitcoin cycle. Uptrend = copper outperforming BTC; downtrend = BTC outperforming copper. Seems aligned with BTC macro tops and bottoms in the mid/long run.
RSP/SPY = market breadth (equal-weight vs cap-weighted). Uptrend = strong broad participation in market growth; downtrend = narrow leadership (fewer stocks leading the growth).
PCE/CPI = Fed’s inflation measure (PCE) vs consumer perceived inflation (CPI). Uptrend = PCE rising faster than CPI; downtrend = CPI running hotter than PCE. Fluctuates around 1; values above 1 may indicate hawkish Fed stands, values < 1 may indicate more dovish Fed stands.
HYG/TLT = credit vs bonds. Uptrend = risk appetite (high-yield outperforming long-term
treasury bonds); downtrend = risk aversion.
GOLD/SILVER = defensive vs cyclical metals. Uptrend = gold outperforming (risk-off tilt); downtrend = silver outperforming (risk-on tilt).
EURUSD/BTC = fiat vs crypto. Uptrend = EUR strengthening vs BTC; downtrend = BTC strengthening vs EUR. In general, the BTC trend is aligned EUR/USD trend.
---------------------------------------------------------
Limitations
Trend detection may lag by design to reduce noise.
Ratios rely on the availability and session rules of their components.
Background colors update on bar close; intra-bar values may differ.
Parameters are fixed and may not suit all assets equally.
---------------------------------------------------------
Disclaimer
This script is for educational and research purposes only. It does not provide financial advice or trade recommendations. Historical trend alignment does not guarantee future outcomes. Use with additional independent analysis.
RSI Plus – Divergence + EMA/WMARSI Plus – Divergence + EMA/WMA
This is an advanced RSI indicator designed for traders who want to maximize the power of RSI.
Beyond the standard RSI plot, this tool adds extra features to help analyze trends and identify better entry signals.
Key Features:
Standard RSI with highlighted zones (20–30, 30–40, 40–60, 60–70, 70–80)
Multiple smoothing options: SMA, EMA, SMMA, WMA, VWMA
Bullish/Bearish divergence detection with labels and alerts
WMA(45) on RSI for mid-term trend confirmation
EMA vs WMA45 color-fill (green for bullish, red for bearish)
Multi-timeframe support (Daily, H4, H1)
How to use:
Spot potential reversals with RSI divergence
Confirm trend direction when RSI EMA > WMA45 (bullish) or EMA < WMA45 (bearish)
kalabis indickatorklasika ukazuje opening range od 12am do 12,30 ,
a taky am opening 9,30am do 10am.
VIX + EMA Trend SinyaliOverlay: true (Gösterge, fiyat grafiği üzerine çizilir).
Maksimum Etiket Sayısı: 500 (Grafikteki sinyal işaretlerinin sayısı sınırlıdır).
Indicator Name: VIX + EMA Trend Signal
Platform: TradingView (Pine Script v5)
Purpose: Generate buy (BUY) and sell (SELL) signals in the market using the VIX Index and EMAs (5 and 21 periods).
Features: Evaluates market fear levels using VIX Index data.
Analyzes EMA (5 and 21) trends.
Generates combined signals (BUY, SELL, WAIT).
Displays EMA lines, VIX levels, and signal signals on the chart for visualization.
Provides summary information in a tabular format.
Includes alert conditions for automatic buy/sell signals.
Overlay: true (The indicator is drawn over the price chart).
Maximum Number of Labels: 500 (The number of signal signals on the chart is limited).
RSI Plus – Divergence + EMA/WMAThis is an advanced RSI indicator with multi-timeframe dashboard support.
Features:
Customizable Moving Averages (EMA, WMA, SMA, VWMA, SMMA)
Divergence detection
RSI zones with background highlights
Clear buy/sell signals with visual alerts
Perfect for traders who want both classic RSI analysis and cross-timeframe confirmation in one tool.
HANUMAN INDICATORThe VIKRANT INDICATOR is a powerful all-in-one TradingView tool designed for traders who want accuracy, clarity, and confidence in their trades. Built with advanced technical logic, it helps identify market trends, entry & exit points, and high-probability trade setups across Forex, Crypto, Indices, Stocks, and Commodities.
⚡ Key Features:
✅ Smart Trend Detection using multi-layer confluence (EMA / Supertrend / RSI / Volume logic)
✅ Clear Buy/Sell signals with chart labels
✅ Built-in Stop Loss (SL), Take Profit (TP), and Trailing Stop system
✅ Works on all timeframes – from scalping (1m/5m) to intraday & swing trading
✅ Backtestable strategy to check accuracy & performance
✅ Fully customizable settings for every trader’s style
Combined CE and PE Option Overlay with pending signalsBETTERMENT OF PREVIOUS VERSION WITH LONGER EXECUTION
consider that after a ce signal appears it is triggered when price crosses and closses the ce signal candle high; simialrly for pe signal if the price closes below the pe signal candle loe then the signal is considered triggered. now if a ce signal is triggerred and then the price reverses to create a pe signal but the pe signal is not triggered, and then again a new signal is generated that gets triggered then this new ce signal should be considered as the subsignal of previous ce signal and this signal label and lines should be orange in colour and both ce signals should be displayed. same vise a versa for pe signal
Future 8 AM MarkerThis simple script marks the 8:00 AM New York open on the chart each day. It’s especially useful in Replay Mode to track price reactions and practice setups around this key time.
Trend Pro - @CRYPTIK1Introduction: What is Trend Pro?
Trend Pro is a comprehensive trend analysis tool designed to give you a clear, at-a-glance understanding of the market's direction across multiple timeframes. In a noisy market, the single most important factor is the dominant trend. This indicator filters out the noise by focusing on one core principle: trading with the primary momentum of the market.
Instead of cluttering your chart with confusing signals, Trend Pro provides a clean, visual representation of the trend, helping you make more confident and informed trading decisions.
The Core Concept: The Power of Confluence
The strength of any trading decision comes from confluence—when multiple factors align to point in the same direction. Trend Pro is built on this idea. It uses a long-term moving average (200-period by default) to define the primary trend on your current chart and then pulls in data from three higher timeframes to confirm whether the broader market agrees with your analysis.
When your current timeframe and the higher timeframes are all aligned, you have a state of "confluence," which represents a higher-probability environment for trend-following trades.
This tool is designed to be a foundational layer for your trading system, providing the essential context you need before entering any trade.
Key Features
1. The Dynamic Trend MA:
The main moving average on your chart acts as your primary guide. Its color dynamically changes to give you an instant read on the market.
Green MA: The price is in a confirmed uptrend (trading above the MA).
Red MA: The price is in a confirmed downtrend (trading below the MA).
2. The Multi-Timeframe (MTF) Trend Dashboard:
Located discreetly in the bottom-right corner, this dashboard is your window into the broader market sentiment. It shows you the trend status (Up, Down, or Neutral) on three customizable higher timeframes.
Green Box: The trend is UP on that timeframe.
Red Box: The trend is DOWN on that timeframe.
Gray Box: The price is neutral or at the MA on that timeframe.
How to Use Trend Pro: A Simple Framework
Step 1: Identify the Primary Trend
Look at the color of the MA on your main chart. This is your starting point. If it's green, you should be looking for opportunities to go long. If it's red, you should be looking for opportunities to go short.
Step 2: Check for Confluence
Glance at the MTF Trend Dashboard.
Strong Confluence (High-Probability): If your main chart is in an uptrend (Green MA) and the dashboard shows all green boxes, the market is in a strong, unified uptrend. This is a high-probability environment to be a buyer.
Weak or No Confluence (Caution Zone): If your main chart is in an uptrend, but the dashboard shows red or gray boxes, it signals that the higher timeframes are not in agreement. This is a sign of market indecision and a lower-probability environment. It's often best to wait for the timeframes to align.
Best Practices & Settings
Timeframe Synergy: For the best results, use Trend Pro on a lower timeframe and set your dashboard to higher timeframes. For example, if you trade on the 1-hour chart, set your MTF dashboard to the 4-hour, 1-day, and 1-week to get a complete picture of the market.
Use as a Confirmation Tool: Trend Pro is not designed to be a standalone entry/exit system. Use it as the foundational layer of your analysis. First, confirm the trend with Trend Pro, then use your preferred entry method (e.g., support/resistance, chart patterns, or other indicators) to time your trade.
Candle Multi-TimeFrame CountCandle Multi-TimeFrame Count is an advanced TradingView indicator that displays real-time countdowns to candle closes across multiple timeframes, along with intelligent multi-close alerts. Perfect for traders who operate across different timeframes and need to efficiently manage their entries and exits.
⚡ Key Features
🕐 Multi-Timeframe Countdown
10 configurable timeframes: From 1 minute to 1 week
Real-time tracking: Precise countdown in HH:MM:SS format
Visual alerts: Color changes when less than 30 seconds remaining (short timeframes) or 1 hour (long timeframes)
🌍 Timezone Selector
Adjustable UTC offset: Manually configure your timezone
Pre-configured settings: NY (-5/-4), Chicago (-6/-5), London (0), Spain (+1/+2)
Manual mode: Set any hour for testing and simulation
🔔 Multi-Close Alerts
Smart prediction: Detects which timeframes will close in the next hour
Specific schedules: Based on actual closing times for each timeframe:
✅ 1H: Every hour on the hour
✅ 2H: Odd hours (01:00, 03:00, 05:00...)
✅ 3H: 02:00, 05:00, 08:00, 11:00, 14:00, 17:00, 20:00, 23:00
✅ 4H: 01:00, 05:00, 09:00, 13:00, 17:00, 21:00
✅ 6H: 05:00, 11:00, 17:00, 23:00
✅ 8H: 01:00, 09:00, 17:00
✅ 12H: 05:00, 17:00
🎨 Complete Customization
Timeframe selector: Choose which to display (up to 10 simultaneously)
Visual customization: Adjust colors, transparency, and text size
Clean interface: Organized table that integrates seamlessly with your chart
🚀 Use Cases
📈 For Day Traders
Manage entries/exits across multiple timeframes
Anticipate important candle closes
Optimize trade timing
⏰ For Swing Traders
Monitor daily and weekly closes
Plan operations based on major candle closures
Identify key temporal convergence moments
🌐 For International Traders
Adapt the indicator to any timezone
Trade global markets with time precision
Maintain consistency regardless of your location
⚙️ Quick Setup
Select timeframes: Choose up to 10 timeframes to monitor
Adjust timezone: Configure UTC offset according to your location
Customize appearance: Modify colors and transparency
Enable alerts: Observe multiple closures in the next hour
💡 Key Benefits
Time savings: No more manual close calculations
Precision: Exact alerts for convergent closes
Flexibility: Adaptable to any trading style
Clear visualization: Critical information at a glance
📋 Technical Information
Language: Pine Script v6
Compatibility: All TradingView instruments
Performance: Optimized to not slow down your charts
🎯 Ideal for: Day traders, swing traders, scalpers, and any trader who needs to efficiently manage multiple timeframes.
🔮 Enhance your trading: Never miss an important close again with Candle Multi-TimeFrame Count!
Globex Trap w/ percentage [SLICKRICK]Globex Trap w/ Percentage
Overview
The Globex Trap w/ Percentage indicator is a powerful tool designed to help traders identify high-probability trading opportunities by analyzing price action during the Globex (overnight) session and regular trading hours. By combining Globex session ranges with Supply & Demand zones, this indicator highlights potential "trap" areas where significant price reactions may occur. Additionally, it calculates the Globex session range as a percentage of the daily Average True Range (ATR), providing valuable context for assessing market volatility.
This indicator is ideal for traders in futures markets or other instruments traded during Globex sessions, offering a visual and analytical edge for spotting key price levels and potential reversals or breakouts.
Key Features
Globex Session Tracking:
Visualizes the high and low of the Globex session (default: 3:00 PM to 6:30 AM PST) with customizable time settings.
Displays a semi-transparent box to mark the Globex range, with labels for "Globex High" and "Globex Low."
Calculates the Globex range as a percentage of the daily ATR, displayed as a label for quick reference.
Supply & Demand Zones:
Identifies Supply & Demand zones during regular trading hours (default: 6:00 AM to 8:00 AM PST) with customizable time settings.
Draws semi-transparent boxes to highlight these zones, aiding in the identification of key support and resistance areas.
Trap Area Identification:
Highlights potential trap zones where Globex ranges and Supply & Demand zones overlap, indicating areas where price may reverse or consolidate due to trapped traders.
Customizable Settings:
Adjust Globex and Supply & Demand session times to suit your trading preferences.
Toggle visibility of Globex and Supply & Demand zones independently.
Customize box colors for better chart readability.
Set the lookback period (default: 10 days) to control how many historical zones are displayed.
Configure the ATR length (default: 14) for the percentage calculation.
PST Timezone Default:
All times are based on Pacific Standard Time (PST) by default, ensuring accurate session tracking for users in this timezone or those aligning with U.S. West Coast market hours.
Recommended Usage
Timeframes: Best used on 1-hour charts or lower (e.g., 15-minute, 5-minute) for precise entry and exit points.
Markets: Optimized for futures (e.g., ES, NQ, CL) and other instruments traded during Globex sessions.
Historical Data: Ensure at least 10 days of historical data for optimal visualization of zones.
Strategy Integration: Use the indicator to identify potential reversals or breakouts at Globex highs/lows or Supply & Demand zones. The ATR percentage provides context for whether the Globex range is significant relative to typical daily volatility.
How It Works
Globex Session:
Tracks the high and low prices during the user-defined Globex session (default: 3:00 PM to 6:30 AM PST).
When the session ends, a box is drawn from the start to the end of the session, capturing the high and low prices.
Labels are placed at the midpoint of the session, showing "Globex High," "Globex Low," and the range as a percentage of the daily ATR (e.g., "75.23% of Daily ATR").
Supply & Demand Zones:
Tracks the high and low prices during the user-defined regular trading hours (default: 6:00 AM to 8:00 AM PST).
Draws a box to mark these zones, which often act as key support or resistance levels.
ATR Percentage:
Calculates the Globex range (high minus low) and divides it by the daily ATR to express it as a percentage.
This metric helps traders gauge whether the overnight price movement is significant compared to the instrument’s typical volatility.
Time Handling:
Uses PST (UTC-8) for all time calculations, ensuring accurate session timing for users aligning with this timezone.
Properly handles overnight sessions that cross midnight, ensuring seamless tracking.
Input Settings
Globex Session Settings:
Show Globex Session: Enable/disable Globex session visualization (default: true).
Globex Start/End Time: Set the start and end times for the Globex session (default: 3:00 PM to 6:30 AM PST).
Globex Box Color: Customize the color of the Globex session box (default: semi-transparent gray).
Supply & Demand Zone Settings:
Show Supply & Demand Zone: Enable/disable zone visualization (default: true).
Zone Start/End Time: Set the start and end times for Supply & Demand zones (default: 6:00 AM to 8:00 AM PST).
Zone Box Color: Customize the color of the zone box (default: semi-transparent aqua).
General Settings:
Days to Look Back: Number of historical days to display zones (default: 10).
ATR Length: Period for calculating the daily ATR (default: 14).
Notes
All times are in Pacific Standard Time (PST). Adjust the start and end times if your market operates in a different timezone or if you prefer different session windows.
The indicator is optimized for instruments with active Globex sessions, such as futures. Results may vary for non-24/5 markets.
A typo in the label "Globe Low" (should be "Globex Low") will be corrected in future updates.
Ensure your TradingView chart is set to display sufficient historical data to view the full lookback period.
Why Use This Indicator?
The Globex Trap w/ Percentage indicator provides a unique combination of session-based range analysis, Supply & Demand zone identification, and volatility context via the ATR percentage. Whether you’re a day trader, swing trader, or scalper, this tool helps you:
Pinpoint key price levels where institutional traders may act.
Assess the significance of overnight price movements relative to daily volatility.
Identify potential trap zones for high-probability setups.
Customize the indicator to fit your trading style and market preferences.
Nearest Rank For Loop - [JTCAPITAL]Nearest Rank For Loop is used for trend-following using the median of the data.
The indicator works by calculating in the following steps:
1. The median is calculated using the ranking length of the source and using "percentile nearest rank" to determine the middle value. This is done with the original length and the length devided by 3, averaged out to eliminate false signals from extremely fast and temporary market movements.
2. Over the length of the loop values get added based on the median being higher than the previous median.
3. The results of the for loop segment get smoothed out using an EMA.
--Buy and sell conditions--
-When the for loop values get above the long threshold we enter a buying condition, we dont exit the buying condition until the for loop values get below the short condition. Which signals a short.
-When the values stay between the thresholds the signal doesnt change. This and smoothing out the for loop values is used to eliminate false signals as much as possible.
--Features and Parameters--
-Allows the changing of the length of the ranking (median)
-Allows the usage of different sources
-Allows changing of the paramaters over the start and end of the for loop segment
-Allows changing the thresholds for longs and shorts
-Allows changing the parameter for the smoothing using an EMA
--Details--
Both the wide thresholds and the use of an EMA over the for loop values are used to eliminate as much false signals as possible. Aswell as deviding the length by 3 and taking the average from the medians. From testing this indicator we have found that using a very small value for the shorting gives the overall best performance. Since a fast market move wont immediately trigger a false signal, but it also wont massively delay entries and exits.
It is recommended to change the parameter settings for different asset classes and timeframes based off volatility and fast and confusing market movements.
Enjoy!
Mykung's Financial Table (Revenue, EPS, Net margin)A compact fundamentals dashboard that displays the last **8 fiscal quarters** for the current symbol. It’s designed for clarity (minimal decimals) and flexible presentation, with a dynamic column layout and accurate quarter labels.
## What it shows
**Columns (left → right):**
`Quarter | Revenue | YoY % | QoQ % | EPS | YoY % | QoQ % | `
* **Quarter** — formatted as `YYYY Q#` (e.g., `2025 Q2`).
Labels are derived from **fiscal period end dates** for accuracy.
* **Revenue** — compact notation (K/M/B/T), **no decimals**.
* **EPS** — uses **Diluted EPS** by default and falls back to **Basic EPS** if Diluted is unavailable. Displayed with **2 decimals**.
* **Net Margin** — displayed with **1 decimal**.
*Note:* Its YoY/QoQ columns represent **percentage-point** changes (absolute differences), not relative percent changes.
* **YoY % and QoQ %** — shown as **integers** (no decimals). Positive values are colored green; negative values red.
## Key features
* **Accurate quarter labels** from fundamentals (`FISCAL_PERIOD_END_DATE` → fallback `FINANCIAL_END_TIME`).
* **Dynamic layout:**
* Show all 10 columns (include Net Margin group), or
* Hide Net Margin to render a **7-column** table automatically.
* **Row order:** **Oldest at top → Latest at bottom** (chronological reading).
* **Customization:**
* Table position (nine presets: corners/centers).
* Text size.
* Table background color.
* **Header colors** (text & background) — also applied to the **Quarter** column cells for visual grouping.
* **Body text color** for data cells.
## Inputs (Settings)
* **Table Position** — place the table anywhere on the chart.
* **Text Size** — auto/tiny/small/normal/large/huge.
* **Table Background** — overall table BG color.
* **Header Background Color** — header & Quarter column background.
* **Header Text Color** — header & Quarter column text color.
* **Body Text Color** — data cells text color.
* **Show Net Margin Group (Cols 7–9)** — toggle between 10-col or 7-col layout.
## Calculations
* **QoQ %** = $(Current − Previous) / |Previous|$ × 100
* **YoY %** = $(Current − 4Q Ago) / |4Q Ago|$ × 100
* **Net Margin YoY / QoQ** = **difference in percentage points** (e.g., 12.4% → 10.9% = −1.5pp)
## Notes & limitations
* Requires symbols with **quarterly fundamentals** on TradingView. If a field is unavailable, it shows **N/A**.
* Fundamentals are updated by TradingView; values may refresh after earnings filings.
* Works on any chart timeframe; data comes from **fundamentals**, not price bars.
* Colors are indicative only and not investment advice.
**Built for readability**: minimal decimals (EPS 2dp, Net Margin 1dp), integer percentages, and compact revenue formatting—so you can scan eight quarters at a glance.
BB Crosses Optimized - [JTCAPITAL]BB Crosses Optimized is a modified way to use Bollinger Bands for Trend-Following
The indicator works by calculating in the following steps:
1. The source gets smoothed out using a moving average
2. Calculating the Bollinger Bands using the SMA of the smoothed source and the standard deviation of the smoothed source.
3. Trigger a signal based on current price and the buy/sell conditions.
--Buy and sell conditions--
-The buy and sell conditions are defined by the price going above/below the first standard deviation. When this goes on the opposite direction of the current trend, the trend changes. If this goes in the same direction of the current trend, the line follows the price by moving up with the standard deviation.
-When using the ATR filter the ATR gets subtracted from the lows or added onto the highs to eliminate false signals in choppy markets.
--Features and Parameters--
-Allows the usage of different sources
-Allows the usage of different moving average types
-Allows the changing of the length of the ATR
-Allows the changing of the length of the bollinger bands period
-Allows the changing of the standard deviation used from the bollinger bands
-Allows the changing of the length for smoothing out the price data
--Details--
This script is using multiple moving averages, sometimes even stacked upon eachother. And it also uses the moving average of the raw data on a short period to calculate the standard deviations. This in combination with the ATR filter is meant to eliminate as much false signals as I could. Without making all the entries and exits extremely delayed.
Be aware that disabling the ATR will allow for faster entries and exits but also allow for more false signals. It is recommended to change the parameters to fit your liking and to adjust to the timeframe you are working on.
Enjoy!
