התחל

חפש סקריפטים עבור "大摩数字经济a+2023持仓"

Stock Relative Strength Power IndexAs always, this is not financial advice and use at your own risk. Trading is risky and can cost you significant sums of money if you are not careful. Make sure you always have a proper entry and exit plan that includes defining your risk before you enter a trade. This idea recently came out of some discussions I stumbled across in a trading group I am a part of regarding Relative Strength and Relative Weakness (shortened to RS and RW from here on out). The whole mechanism behind this trading system is to filter out underperforming securities relative to the current market direction to be in only the strongest or weakest stocks when the market is currently experiencing a bullish or bearish cycle. The idea behind this is there is no point in parking your money into a stock that is treading water or even going down if the market is making strong moves upwards. At that point, you are at worst losing money, and at best trading equal to the index/ETF, in which case the argument is why are you not just trading the index/ETF instead? RS or RW will filter out these sector laggards and allow you to position yourself into strong (or the strongest) stocks at any given time to help improve portfolio performance. Further, not only does it protect your position should the market shift against you briefly, it also often sees exceptional performance in the same cycle. For example, if $SPY makes a 5% move over the course of a month, a stock with RS/RW may make a 10% move, or more, allowing you to see increased profit potential. RS/RW is based on the idea of performance, that is the raw percent change of a security over a given time period relative to a benchmark. This benchmark is often the S&P500 (ES/SPX/SPY and their derivatives). I have to stress that this is not beta, which measures the volatility of a stock over a given period (i.e. if $SPY moves $1, $NVDA will often move $1.74). This is a measurement of the market (i.e. $SPY) has moved 1% over the course of a day, $NVDA has moved 8% over the course of the day. This is very often used as a signal of institutional interest as apart from some very unique moments, retail traders cannot and will not provide enough market pressure to move a market outside of a stock's normal trading range, nor will they outperform the sector or market as a whole consistently over time without some big money to make them move. The problem with running strict performance analysis (i.e. % change from period T ago to period T + n at present) is that while it gives us a baseline of how much the stock has moved, it doesn't overall mean much. For instance, if a $100 stock has moved 5% today, but has been experiencing a period of increased volatility and it's Average True Range (ATR) (the amount a stock will move over X number of periods, on average) is $7, performance seems impressive but is actually generally fairly weak to what the stock has been doing recently. Conversely, if we take a second stock, this time worth $20, and it too has moved 5% in one day but has an ATR of only $0.25, that stock has made an exceptional move and we want to be part of that. Here, I have created an indicator called the Stock Relative Strength Power Index. This takes the stock's rate of change (ROC) (the % move it has made over X number of periods), the stock's normalized ATR (the ATR represented as a percentage instead of a raw value), and compares these to one another to get the "Power Rating": a representation of the true strength of a stock over X number of periods. The indicator does two things. First, the raw ROC is divided by the stock's normalized ATR to assess whether the stock is moving outside of its normal range of variation or not. Second, since we are interested in trading only stocks with exceptional RS/RW to the market, I have also applied this same calculation to the S&P500 ($SPY) and the various SPDR sector indexes. These comparisons allow for a rapid and accurate assessment of the true strength of a stock at any given time on any given time frame. To cycle back above to our examples, the $100 stock has a Power Rating of only 0.71 (i.e. it is trading less than its current average), while our $20 stock has a Power Rating of 5. If we then compare these to both the market as a whole and the sector that the stock is a part of, we get a much clearer indication of the true buying or selling pressure imposed on the stock at any given time. Use: The indicator has 3 lines. The blue line is the security of interest, the red line is the market baseline (i.e. the sector ETF $SPY), and the white line is the sector index. I have given an example above on the semiconductor/tech stock $NVDA on a 30min timeframe. You can see that since the start of 2023, $NVDA has generally been strong to the market and its own sector since the blue line is greater than both the red and white lines over many days. This would have provided some nice day trading opportunities, or even some nice short term swing trades. The values themselves are generally meaningless outside of either the 1 or -1 value lines. All that matters is that the current ticker is surpassing both the market and the sector while being > 1.0 for a long trade or less than -1.0 for a short trade. However, I must stress this indicator gives no trade signals on its own, it is purely a confirmation indicator. An example of a trade would be if you had a trade signal given by either an indicator or by price action suggesting to buy some $NVDA for a trade to the upside, the Power Rating indicator would confirm this by showing if $NVDA was actually showing true strength by being both greater than 1 (the cutoff for it surpassing its ATR) and being above both the red and white lines. Further, you can see $NVDA has been stronger than the market when using the comparison function as well, but the has fluxed in and out of strength intraday when using the actual indicator vs. the static performance ratio chart (plotted as line graphs on the chart). I have made it possible to change the colour of the plots and the line levels. The adjustment of the line levels gives the trader the flexibility to change their target breakout level (i.e. only trading stocks that have a Power Rating > 2, for example, meaning they are trading at least 2X their normal trading range). The third security comparison is flexible and can be used to compare to the sector ETF (initial intention) or it can be used to compare to other tickers within the same sector, for example. The trader should select the appropriate ETF for the given security of interest to avoid false confirmation if they want to use an ETF as their third input. The proper sector should be readily available on most online websites and accessible in a matter of seconds meaning that the delay is minimal, at worst. If a trader wishes to add additional functionality, such as a crypto trader using BTCUSD as the benchmark instead of $SPY, I encourage them to copy and paste this script and modify as needed since I have made this open source. This indicator works on all timeframes. The lookback period can be changed, so a day trader who may use a 5min chart (and use a period of 12 to get the hourly Power Rating) will find this equally useful as someone who may be a core trader who wants to look at the performance over the course of years and may use a 60 period on a monthly chart. Happy trading and I hope this helps!
אינדיקטור Pine Script®
מאת ‎christoefert‎
15
Market Structure MA Based BOS [liwei666] 🎲 Overview 🎯 This BOS(Break Of Structure) indicator build based on different MA such as EMA/RMA/HMA, it's usually earlier than pivothigh() method when trend beginning, customer your BOS with 2 parameters now. 🎲 Indicator design logic 🎯 The logic is simple and code looks complex, I‘ll explain core logic but not code details. 1. use close-in EMA's highest/lowest value mark as SWING High/Low when EMA crossover/under, not use func ta.pivothigh()/ta.pivotlow() 2. once price reaching EMA’s SWING High/Low, draw a line link High/Low to current bar, labled as BOS 3. find regular pattern benefit your trading. 🎲 Settings 🎯 there are 4 input properties in script, 2 properties are meaningful in 'GRP1' another 2 are display config in 'GRP2'. GRP1 MA_Type: MA type you can choose(EMA/RMA/SMA/HMA), default is 'HMA'. short_ma_len: MA length of your current timeframe on chart GRP2 show_short_zz: Show short_ma Zigzag show_ma_cross_signal: Show ma_cross_signal 🎲 Usage 🎯 BOS signal usually worked fine in high volatility market, low volatility is meaningless. 🎯 We can see that it performs well in trending market of different symbols, and BOS is an opportunity to add positions BINANCE:BTCUSDTPERP BINANCE:ETHUSDTPERP 🎯 MA Based signal is earlier than pivothigh()/pivotlow() method when trend beginning. it means higher profit-loss rate. 🎯 any questions or suggestion please comment below. Additionally, I plan to publish 20 profitable strategies in 2023; indicatior not one of them, let‘s witness it together! Hope this indicator will be useful for you :) enjoy! 🚀🚀🚀
אינדיקטור Pine Script®
מאת ‎liwei666‎
6
Multi-Timeframe MA Based Zigzag[liwei666]🎲 Overview 🎯 This Zigzag indicator build based on different MA such as EMA/HMA/RMA/SMA, support multi-timeframe setting . you can get customer zigzag indicator by change short/long ma length and high-timeframe config(5m/15m/30m/1h/2h) in any symbol. 🎲 Indicator design logic 🎯 entired logic is simple and code looks complex, I‘ll explain core logic here, code already equipped with detailed comments. 1. use close-in EMA's highest/lowest value mark as SWING High/Low when EMA crossover/under, not use func ta.pivothigh()/ta.pivotlow() 2. when EMA crossover/under plot a char as signal like ●/❄/▲, crossover get blue char crossunder get red char 3. latest zigzag line is not drawn until EMA is turned (crossover/under), but signal is realtime 4. you can see diff zigzag structure when you open high-timeframe config, then find regular pattern benefit your trading. 🎲 Settings 🎯 there are 3 group properties in script, just focus on 5 properties in 'GRP1' , 'GRP2' and 'GRP3' are display config. 'GRP1': MA_Type: MA type you can choose(EMA/RMA/SMA/HMA/WMA), default is EMA short_ma_len: short MA length of your current timeframe on chart long_ma_len: long MA length of your current timeframe on chart htf_ma_len: MA length of high timeframe, MA type same as 'MA_Type' config htf_ma_tf: high timeframe ma length, 15/30/60/120 minute 'GRP2': • show_short_zz • show_long_zz  • show_htf_zz: 'GRP3': • show_short_ma_line • show_short_ma_signal • show_long_ma_line • show_long_ma_signal • show_htf_ma_line • show_htf_ma_signal 🎲 Usage 🎯 As we know, MA based signal usually worked fine in trend market , low volatility is unprofitable. 🎯 One of pattern as the chart show below. 1. success example : after a blue ▲ signal, entry long when blue ● signal appear, marked with green box. 2. failed example: after a blue ▲ signal, a red ▼ signal appear, marked with white box. 🎯 BoS(Break of Structure) based on ma zigzag is a good idea I'm implementing, it will be published in next script. Additionally, I plan to publish 20 profitable strategies in 2023; this indicatior not one of them, let‘s witness it together! Hope this indicator will be useful for you :) enjoy! 🚀🚀🚀
אינדיקטור Pine Script®
מאת ‎liwei666‎
2
Simple SuperTrend Strategy for BTCUSD 4HHello guys!, If you are a swing trader and you are looking for a simple trend strategy, you should check this one. Based in the supertrend indicator, this strategy will help you to catch big movements in BTCUSD 4H and avoid losses as much as possible in consolidated situations of the market This strategy was designed for BTCUSD in 4H timeframe Backtesting context: 2020-01-02 to 2023-01-05 (The strategy has also worked in previous years) Trade conditions: Rules are actually simple, the most important thing is the risk and position management of this strategy For long: Once Supertrend changes from a downtrend to a uptrend, you enter into a long position. The stop loss will be defined by the atr stop loss The first profit will be of 0.75 risk/reward ratio where half position will be closed. When this happens, you move the stop loss to break even. Now, just will be there two situations: Once Supertrend changes from a uptrend to a downtrend, you close the other half of the initial long position. If price goes againts the position, the position will be closed due to breakeven. For short: Once Supertrend changes from a uptrend to a downtrend, you enter into a short position. The stop loss will be defined by the atr stop loss The first profit will be of 0.75 risk/reward ratio where half position will be closed. When this happens, you move the stop loss to break even. Like in the long position, just will be there two situations: Once Supertrend changes from a downtrend to a uptrend, you close the other half of the initial short position. If price goes againts the position, the position will be closed due to breakeven. Risk management For calculate the amount of the position you will use just a small percent of your initial capital for the strategy and you will use the atr stop loss for this. Example: You have 1000 usd and you just want to risk 2,5% of your account, there is a long signal at price of 20,000 usd. The stop loss price from atr stop loss is 19,000. You calculate the distance in percent between 20,000 and 19,000. In this case, that distance would be of 5,0%. Then, you calculate your position by this way: (initial or current capital * risk per trade of your account) / (stop loss distance). Using these values on the formula: (1000*2,5%)/(5,0%) = 500usd. It means, you have to use 500 usd for risking 2.5% of your account. We will use this risk management for apply compound interest. Script functions Inside of settings, you will find some utilities for display atr stop loss, supertrend or positions. You will find the settings for risk management at the end of the script if you want to change something. But rebember, do not change values from indicators, the idea is to not over optimize the strategy. If you want to change the initial capital for backtest the strategy, go to properties, and also enter the commisions of your exchange and slippage for more realistic results. Signals meanings: L for long position. CL for close long position. S for short position. CS for close short position. Tp for take profit (it also appears when the position is closed due to stop loss, this due to the script uses two kind of positions) Exit due to break even or due to stop loss Some things to consider USE UNDER YOUR OWN RISK. PAST RESULTS DO NOT REPRESENT THE FUTURE. DEPENDING OF % ACCOUNT RISK PER TRADE, YOU COULD REQUIRE LEVERAGE FOR OPEN SOME POSITIONS, SO PLEASE, BE CAREFULL AND USE CORRECTLY THE RISK MANAGEMENT The amount of trades closed in the backtest are not exactly the real ones. If you want to know the real ones, go to settings and change % of trade for first take profit to 100 for getting the real ones. In the backtest, the real amount of opened trades was of 194. Indicators used: Supertrend Atr stop loss by garethyeo This is the fist strategy that I publish in tradingview, I will be glad with you for any suggestion, support or advice for future scripts. Do not doubt in make any question you have and if you liked this content, leave a boost. I plan to bring more strategies and useful content for you!
אסטרטגיית Pine Script®
מאת ‎StrategiesForEveryone‎
6
ATR_RSI_Strategy v2 with no repaint [liwei666]🎲 Overview 🎯 this is a optimized version based on ATR_RSI_Strategy with no-repaint. Sharpe ratio: 1.4, trade times: 116 , trade symbol: BINANCE:BTCUSDTPERP 15M you can get same backtesting result with the correct settings. 🎲 Strategy Logic 🎯 the core logic is quite simple, use ATR and RSI and SMA 1. when price is in high volatility ( atr_value > atr_ma); 2. wait for a break signal (rsi_value > rsi_buy or rsi_value < rsi_sell); 3. entry Long or Short,use trailing stop-loss to max security and percent TP to keep profit. 🎲 Settings 🎯 there are 7 input properties in script, but I only finetune 4 of them ( bold field below ), you may change other parameter to get better result by yourself. atr_length: length to get atr value atr_ma_length : length of smoothing atr value atr_ma_norm_min : atr_ma normalized min value, filter high volatility ranges atr_ma_norm_max : atr_ma normalized max value, filter high volatility ranges rsi_length : length to get rsi value rsi_entry: 50 +/- rsi_entry to get entry threshold trailing_percent: trailing stop-loss percent 🎲 Usage 🎯 the commission set to 0.05% , part of exchange the commission is less than 0.05% in reality, but I will still use 0.05% in my next script. 🎯 this script use 50% of equity to size positions follow general script position, you can adjust the value to fix size or 100% of equity to compare result with other strategy, but I still suggest you use 5-10% of equity for each strategy in reality. 🎯any questions please comment below. if there are any words violate House Rule, please tell me below and i will revise immediately don't want be hiddened again 😂😂 Additionally, I plan to publish 20 profitable strategies in 2023; let‘s witness it together! Hope this strategy will be usefull for you :) enjoy! 🚀🚀🚀
אסטרטגיית Pine Script®
מאת ‎liwei666‎
3
Tick based chart [DotH]Version 1.0 - 2nd January 2023 Hi All, This is my first published indicator, although I have written several hundreds for private use. Description Tick based chart I got intrigued while reading about tick based charts on this page (please note this link/website owner is not affiliated with me) , so I decided to see if it would be possible to recreate this type of chart in TradingView, and here's the results. This is an implementation for displaying a tick based chart in Trading View. There are benefits to using ticks based candles, as each candle represents the same number of "price moves" rather than an unknown number of moves. Tick based charts are charts with candles that are rendered in the same way as traditional candles. However, instead of rendering a new candle at a specific time period,tick based candles are rendered after a set number of ticks have occured. For example, in a 50 tick chart, each candle that you see represents exactly 50 ticks, i.e. 50 price changes/moves. Having a view of what happens on the tick level, may help some traders evaluate what is happening within very large candles, or even detect a change in trend, volatility or some other metric which otherwise may not be visible using a standard chart. Please note that this indicator DOES NOT match/synchronize timewise with the main chart in TradingView. You must view it independently. If you need to see what times are represented in the tick chart, you can look at the custom time labels and X-Axis grid lines in it to get an idea what parts of the tick based chart correspond to the main chart. Limitations/known issues: Currently the indicator has been restricted to 100 candles. This is for limiting the line and box usage to a max of 300 objects. On timeframes above 1 minute, the seconds values will always be 0. In order to be able to see seconds values in the chart scale you need to be on a second level chart, which requires a premium TradingView subscription. Changing the parameters in the settings will cause the chart to empty and start redrawing from its first candle again. This is because the tick chart is being drawn from realtime data, unlike the standard TradingView charts. TODOs & Bugs: Add some moving average indicators (SMA, EMA as a minimum) Add a corresponding tick based volume chart Create RSI, MACD, BB variations of this indicator If you have any ideas/suggestions or bug reports, please feel free to let me know, however keep in mind that I do not have too much spare time to add things, so updates are going to be sporadic. ABOUT CODE REUSE: The code is free to use/change. However, if you plan to use this code to make a derivative indicator or strategy, it would be nice to know, so let me know if you feel like it!
אינדיקטור Pine Script®
מאת ‎doth4581‎
7
True Range Adjusted Exponential Moving Average [CC]The True Range Adjusted Exponential Moving Average was created by Vitali Apirine (Stocks and Commodities Jan 2023 pgs 22-27) and this is the latest indicator in his EMA variation series. He has been tweaking the traditional EMA formula using various methods and this indicator of course uses the True Range indicator. The way that this indicator works is that it uses a stochastic of the True Range vs its highest and lowest values over a fixed length to create a multiple which increases as the True Range rises to its highest level and decreases as the True Range falls. This in turn will adjust the Ema to rise or fall depending on the underlying True Range. As with all of my indicators, I have color coded it to turn green when it detects a buy signal or turn red when it detects a sell signal. Darker colors mean it is a very strong signal and let me know if you find any settings that work well overall vs the default settings. Let me know if you would like me to publish any other scripts that you recommend!
אינדיקטור Pine Script®
מאת ‎cheatcountry‎
4
Wolfe Strategy [Trendoscope]Hello Everyone, Wish you all Merry X-Mas and happy new year. Lets start 2023 with fresh new strategy built on Wolfe Indicator. Details of the indicator can be found here 🎲 Wolfe Concept Wolfe concept is simple. Whenever a wedge is formed, draw a line joining pivot 1 and 4 as shown in the chart below: For simplicity, we will only consider static value for Target and Stop. But, entry is done based on breaking the triangle. Revised strategy looks something like this: 🎲 Settings Settings are simple and details of each are provided via tooltips. Out of these, the most important one is minimum risk reward ratio. If you set lower risk reward threshold then losing few trades may generate more losses than more winning trades. Similarly higher value will filter out most of the trades and may not work efficiently. Default value set to 1 to make sure optimal risk reward is present before placing trade. Also make note that since the entry bar is always moving towards stop, as and when pattern progress, the RR will also increase. Hence, a pattern which is below RR threshold may become good to trade at certain point of time in future. 🎲 Strategy Parameters Default strategy parameters are initialised via definition. Margins are set to 100 to disable leveraged trades. Appropriate values are chosen for other parameters. These can be altered based on individual strategy and trading plan. As the strategy concentrates on the single pattern, number of trades generated are comparatively less. But, there is chance to increase the algorithm further to catch more such patterns on larger scale. Will try to work on them in next versions. 🎲 Pine Strategy limitations Backtest can only be done on one direction as pine strategy cannot have both long and short open trades together. Hence, it is mandatory to chose either long/short trades in settings. Since pyramiding is limited to 1, there is possibility of a pattern not generating trade even though the entry conditions are met. They are just based on pine limitations and not necessarily mean patterns are not good for placing trades.
אסטרטגיית Pine Script®
מאת ‎Trendoscope‎
33
7-10 flattener tradeIn the budget speech for FY 2023, market borrowing of 14.95 lakh crore from the market. In the Feb MPC meeting, the RBI brought down its estimates of growth and inflation potentially signaling that economy is/will go through a demand slowdown. Now in a slowing economy, the govt. finances will be affected. Therefore, to bring back the economy on the fiscal consolidation so that sovereign bond ratings are not hit, the Indian govt. must figure out a way 1. Lower its interest payments in the face of increasing public expenditure on creating public infrastructure (read roads/highways etc. ). One simple way is to go down the yield curve in lower maturities to bring down the interest costs. Keeping in mind (1) above, it was not difficult to expect a borrowing schedule where the shorter tenors will form a bigger percentage of the net issuance by the government. In fact, if you look at the issuance calendar for securities below the tenor of 10 yrs (which is 2,5,7 yrs), you will find that itself comprises of ~31% of total borrowings. Therefore, due to increased pressure on the shorter tenors and relatively less pressure on 10 yr bond yield, we can expect the yields spreads to compress in 7-10 yr region of the yield curve. This script is written to track the same yield spread compression across 7 & 10 yr tenor.
אינדיקטור Pine Script®
מאת ‎abhishekjoshi1493‎
taLibrary "ta" █  OVERVIEW This library holds technical ​analysis functions calculating values for which no Pine built-in exists. Look first. Then leap. █  FUNCTIONS cagr(entryTime, entryPrice, exitTime, exitPrice) It calculates the "Compound Annual Growth Rate" between two points in time. The ​CAGR is a notional, annualized growth rate that assumes all profits are reinvested. It only takes into account the prices of the two end points — not drawdowns, so it does not calculate risk. It can be used as a yardstick to compare the performance of two instruments. Because it annualizes values, the function requires a minimum of one day between the two end points (annualizing returns over smaller periods of times doesn't produce very meaningful figures).   Parameters:      entryTime : The starting timestamp.      entryPrice : The starting point's price.      exitTime : The ending timestamp.      exitPrice : The ending point's price.   Returns: ​CAGR in % (50 is 50%). Returns `na` if there is not >=1D between `entryTime` and `exitTime`, or until the two time points have not been reached by the script. █  v2, Mar. 8, 2022 Added functions `allTimeHigh()` and `allTimeLow()` to find the highest or lowest value of a source from the first historical bar to the current bar. These functions will not look ahead; they will only return new highs/lows on the bar where they occur. allTimeHigh(​src) Tracks the highest value of `src` from the first historical bar to the current bar.   Parameters:      src : (series int/float) Series to track. Optional. The default is `high`.   Returns: (float) The highest value tracked. allTimeLow(​src) Tracks the lowest value of `src` from the first historical bar to the current bar.   Parameters:      src : (series int/float) Series to track. Optional. The default is `low`.   Returns: (float) The lowest value tracked. █  v3, Sept. 27, 2022 This version includes the following new functions: aroon(length)   Calculates the values of the Aroon indicator.   Parameters:      length (simple int) : (simple int) Number of bars (length).   Returns: ( [float, float ]) A tuple of the Aroon-Up and Aroon-Down values. coppock(source, longLength, shortLength, smoothLength)   Calculates the value of the Coppock Curve indicator.   Parameters:      source (float) : (series int/float) Series of values to process.      longLength (simple int) : (simple int) Number of bars for the fast ROC value (length).      shortLength (simple int) : (simple int) Number of bars for the slow ROC value (length).      smoothLength (simple int) : (simple int) Number of bars for the weigted moving average value (length).   Returns: (float) The oscillator value. dema(source, length)   Calculates the value of the Double Exponential Moving Average (DEMA).   Parameters:      source (float) : (series int/float) Series of values to process.      length (simple int) : (simple int) Length for the smoothing parameter calculation.   Returns: (float) The double exponentially weighted moving average of the `source`. d​ema2(​src, length)   An alternate ​Double Exponential ​Moving Average (D​ema) function to `d​ema()`, which allows a "series float" length argument.   Parameters:      ​src : (series int/float) Series of values to process.      length : (series int/float) Length for the smoothing parameter calculation.   Returns: (float) The double exponentially ​weighted moving average of the `​src`. dm(length)   Calculates the value of the "Demarker" indicator.   Parameters:      length (simple int) : (simple int) Number of bars (length).   Returns: (float) The oscillator value. donchian(length)   Calculates the values of a Donchian Channel using `high` and `low` over a given `length`.   Parameters:      length (int) : (series int) Number of bars (length).   Returns: ( [float, float, float ]) A tuple containing the channel high, low, and median, respectively. ​ema2(​src, length)   An alternate ​ema function to the `ta.​ema()` built-in, which allows a "series float" length argument.   Parameters:      ​src : (series int/float) Series of values to process.      length : (series int/float) Number of bars (length).   Returns: (float) The exponentially ​weighted moving average of the `​src`. eom(length, div)   Calculates the value of the Ease of Movement indicator.   Parameters:      length (simple int) : (simple int) Number of bars (length).      div (simple int) : (simple int) Divisor used for normalzing values. Optional. The default is 10000.   Returns: (float) The oscillator value. frama(source, length)   The Fractal Adaptive Moving Average (FRAMA), developed by John Ehlers, is an adaptive moving average that dynamically adjusts its lookback period based on fractal geometry.   Parameters:      source (float) : (series int/float) Series of values to process.      length (int) : (series int) Number of bars (length).   Returns: (float) The fractal adaptive moving average of the `source`. ft(source, length)   Calculates the value of the Fisher Transform indicator.   Parameters:      source (float) : (series int/float) Series of values to process.      length (simple int) : (simple int) Number of bars (length).   Returns: (float) The oscillator value. ht(source)   Calculates the value of the Hilbert Transform indicator.   Parameters:      source (float) : (series int/float) Series of values to process.   Returns: (float) The oscillator value. ichimoku(conLength, baseLength, senkouLength)   Calculates values of the Ichimoku Cloud indicator, including tenkan, kijun, senkouSpan1, senkouSpan2, and chikou. NOTE: offsets forward or backward can be done using the `offset` argument in `plot()`.   Parameters:      conLength (int) : (series int) Length for the Conversion Line (Tenkan). The default is 9 periods, which returns the mid-point of the 9 period Donchian Channel.      baseLength (int) : (series int) Length for the Base Line (Kijun-sen). The default is 26 periods, which returns the mid-point of the 26 period Donchian Channel.      senkouLength (int) : (series int) Length for the Senkou Span 2 (Leading Span B). The default is 52 periods, which returns the mid-point of the 52 period Donchian Channel.   Returns: ( [float, float, float, float, float ]) A tuple of the Tenkan, Kijun, Senkou Span 1, Senkou Span 2, and Chikou Span values. NOTE: by default, the senkouSpan1 and senkouSpan2 should be plotted 26 periods in the future, and the Chikou Span plotted 26 days in the past. ift(source)   Calculates the value of the Inverse Fisher Transform indicator.   Parameters:      source (float) : (series int/float) Series of values to process.   Returns: (float) The oscillator value. kvo(fastLen, slowLen, trigLen)   Calculates the values of the Klinger Volume Oscillator.   Parameters:      fastLen (simple int) : (simple int) Length for the fast moving average smoothing parameter calculation.      slowLen (simple int) : (simple int) Length for the slow moving average smoothing parameter calculation.      trigLen (simple int) : (simple int) Length for the trigger moving average smoothing parameter calculation.   Returns: ( [float, float ]) A tuple of the KVO value, and the trigger value. pzo(length)   Calculates the value of the Price Zone Oscillator.   Parameters:      length (simple int) : (simple int) Length for the smoothing parameter calculation.   Returns: (float) The oscillator value. rms(source, length)   Calculates the Root Mean Square of the `source` over the `length`.   Parameters:      source (float) : (series int/float) Series of values to process.      length (int) : (series int) Number of bars (length).   Returns: (float) The RMS value. rwi(length)   Calculates the values of the Random Walk Index.   Parameters:      length (simple int) : (simple int) Lookback and ATR smoothing parameter length.   Returns: ( [float, float ]) A tuple of the `rwiHigh` and `rwiLow` values. stc(source, fast, slow, cycle, d1, d2)   Calculates the value of the Schaff Trend Cycle indicator.   Parameters:      source (float) : (series int/float) Series of values to process.      fast (simple int) : (simple int) Length for the MACD fast smoothing parameter calculation.      slow (simple int) : (simple int) Length for the MACD slow smoothing parameter calculation.      cycle (simple int) : (simple int) Number of bars for the Stochastic values (length).      d1 (simple int) : (simple int) Length for the initial %D smoothing parameter calculation.      d2 (simple int) : (simple int) Length for the final %D smoothing parameter calculation.   Returns: (float) The oscillator value. stochFull(periodK, smoothK, periodD)   Calculates the %K and %D values of the Full Stochastic indicator.   Parameters:      periodK (simple int) : (simple int) Number of bars for Stochastic calculation. (length).      smoothK (simple int) : (simple int) Number of bars for smoothing of the %K value (length).      periodD (simple int) : (simple int) Number of bars for smoothing of the %D value (length).   Returns: ( [float, float ]) A tuple of the slow %K and the %D moving average values. stochRsi(lengthRsi, periodK, smoothK, periodD, source)   Calculates the %K and %D values of the Stochastic RSI indicator.   Parameters:      lengthRsi (simple int) : (simple int) Length for the RSI smoothing parameter calculation.      periodK (simple int) : (simple int) Number of bars for Stochastic calculation. (length).      smoothK (simple int) : (simple int) Number of bars for smoothing of the %K value (length).      periodD (simple int) : (simple int) Number of bars for smoothing of the %D value (length).      source (float) : (series int/float) Series of values to process. Optional. The default is `close`.   Returns: ( [float, float ]) A tuple of the slow %K and the %D moving average values. supertrend(factor, atrLength, wicks)   Calculates the values of the SuperTrend indicator with the ability to take candle wicks into account, rather than only the closing price.   Parameters:      factor (float) : (series int/float) Multiplier for the ATR value.      atrLength (simple int) : (simple int) Length for the ATR smoothing parameter calculation.      wicks (simple bool) : (simple bool) Condition to determine whether to take candle wicks into account when reversing trend, or to use the close price. Optional. Default is false.   Returns: ( [float, int ]) A tuple of the superTrend value and trend direction. szo(source, length)   Calculates the value of the Sentiment Zone Oscillator.   Parameters:      source (float) : (series int/float) Series of values to process.      length (simple int) : (simple int) Length for the smoothing parameter calculation.   Returns: (float) The oscillator value. t3(source, length, vf)   Calculates the value of the Tilson Moving Average (T3).   Parameters:      source (float) : (series int/float) Series of values to process.      length (simple int) : (simple int) Length for the smoothing parameter calculation.      vf (simple float) : (simple float) Volume factor. Affects the responsiveness.   Returns: (float) The Tilson moving average of the `source`. t3Alt(source, length, vf)   An alternate Tilson Moving Average (T3) function to `t3()`, which allows a "series float" `length` argument.   Parameters:      source (float) : (series int/float) Series of values to process.      length (float) : (series int/float) Length for the smoothing parameter calculation.      vf (simple float) : (simple float) Volume factor. Affects the responsiveness.   Returns: (float) The Tilson moving average of the `source`. tema(source, length)   Calculates the value of the Triple Exponential Moving Average (TEMA).   Parameters:      source (float) : (series int/float) Series of values to process.      length (simple int) : (simple int) Length for the smoothing parameter calculation.   Returns: (float) The triple exponentially weighted moving average of the `source`. tema2(source, length)   An alternate Triple Exponential Moving Average (TEMA) function to `tema()`, which allows a "series float" `length` argument.   Parameters:      source (float) : (series int/float) Series of values to process.      length (float) : (series int/float) Length for the smoothing parameter calculation.   Returns: (float) The triple exponentially weighted moving average of the `source`. trima(source, length)   Calculates the value of the Triangular Moving Average (TRIMA).   Parameters:      source (float) : (series int/float) Series of values to process.      length (int) : (series int) Number of bars (length).   Returns: (float) The triangular moving average of the `source`. trima2(​src, length)   An alternate Triangular ​Moving Average (TRIMA) function to `trima()`, which allows a "series int" length argument.   Parameters:      ​src : (series int/float) Series of values to process.      length : (series int) Number of bars (length).   Returns: (float) The triangular moving average of the `​src`. trix(source, length, signalLength, exponential)   Calculates the values of the TRIX indicator.   Parameters:      source (float) : (series int/float) Series of values to process.      length (simple int) : (simple int) Length for the smoothing parameter calculation.      signalLength (simple int) : (simple int) Length for smoothing the signal line.      exponential (simple bool) : (simple bool) Condition to determine whether exponential or simple smoothing is used. Optional. The default is `true` (exponential smoothing).   Returns: ( [float, float, float ]) A tuple of the TRIX value, the signal value, and the histogram. uo(fastLen, midLen, slowLen)   Calculates the value of the Ultimate Oscillator.   Parameters:      fastLen (simple int) : (series int) Number of bars for the fast smoothing average (length).      midLen (simple int) : (series int) Number of bars for the middle smoothing average (length).      slowLen (simple int) : (series int) Number of bars for the slow smoothing average (length).   Returns: (float) The oscillator value. vhf(source, length)   Calculates the value of the Vertical Horizontal Filter.   Parameters:      source (float) : (series int/float) Series of values to process.      length (simple int) : (simple int) Number of bars (length).   Returns: (float) The oscillator value. vi(length)   Calculates the values of the Vortex Indicator.   Parameters:      length (simple int) : (simple int) Number of bars (length).   Returns: ( [float, float ]) A tuple of the viPlus and viMinus values. vzo(length)   Calculates the value of the Volume Zone Oscillator.   Parameters:      length (simple int) : (simple int) Length for the smoothing parameter calculation.   Returns: (float) The oscillator value. williamsFractal(period)   Detects Williams Fractals.   Parameters:      period (int) : (series int) Number of bars (length).   Returns: ( [bool, bool ]) A tuple of an up fractal and down fractal. Variables are true when detected. wpo(length)   Calculates the value of the Wave Period Oscillator.   Parameters:      length (simple int) : (simple int) Length for the smoothing parameter calculation.   Returns: (float) The oscillator value. █  v7, Nov. 2, 2023 This version includes the following new and updated functions: atr2(length)   An alternate ATR function to the `ta.atr()` built-in, which allows a "series float" `length` argument.   Parameters:      length (float) : (series int/float) Length for the smoothing parameter calculation.   Returns: (float) The ATR value. changePercent(newValue, oldValue)   Calculates the percentage difference between two distinct values.   Parameters:      newValue (float) : (series int/float) The current value.      oldValue (float) : (series int/float) The previous value.   Returns: (float) The percentage change from the `oldValue` to the `newValue`. donchian(length)   Calculates the values of a Donchian Channel using `high` and `low` over a given `length`.   Parameters:      length (int) : (series int) Number of bars (length).   Returns: ( [float, float, float ]) A tuple containing the channel high, low, and median, respectively. highestSince(cond, source)   Tracks the highest value of a series since the last occurrence of a condition.   Parameters:      cond (bool) : (series bool) A condition which, when `true`, resets the tracking of the highest `source`.      source (float) : (series int/float) Series of values to process. Optional. The default is `high`.   Returns: (float) The highest `source` value since the last time the `cond` was `true`. lowestSince(cond, source)   Tracks the lowest value of a series since the last occurrence of a condition.   Parameters:      cond (bool) : (series bool) A condition which, when `true`, resets the tracking of the lowest `source`.      source (float) : (series int/float) Series of values to process. Optional. The default is `low`.   Returns: (float) The lowest `source` value since the last time the `cond` was `true`. relativeVolume(length, anchorTimeframe, isCumulative, adjustRealtime)   Calculates the volume since the last change in the time value from the `anchorTimeframe`, the historical average volume using bars from past periods that have the same relative time offset as the current bar from the start of its period, and the ratio of these volumes. The volume values are cumulative by default, but can be adjusted to non-accumulated with the `isCumulative` parameter.   Parameters:      length (simple int) : (simple int) The number of periods to use for the historical average calculation.      anchorTimeframe (simple string) : (simple string) The anchor timeframe used in the calculation. Optional. Default is "D".      isCumulative (simple bool) : (simple bool) If `true`, the volume values will be accumulated since the start of the last `anchorTimeframe`. If `false`, values will be used without accumulation. Optional. The default is `true`.      adjustRealtime (simple bool) : (simple bool) If `true`, estimates the cumulative value on unclosed bars based on the data since the last `anchor` condition. Optional. The default is `false`.   Returns: ( [float, float, float ]) A tuple of three float values. The first element is the current volume. The second is the average of volumes at equivalent time offsets from past anchors over the specified number of periods. The third is the ratio of the current volume to the historical average volume. rma2(source, length)   An alternate RMA function to the `ta.rma()` built-in, which allows a "series float" `length` argument.   Parameters:      source (float) : (series int/float) Series of values to process.      length (float) : (series int/float) Length for the smoothing parameter calculation.   Returns: (float) The rolling moving average of the `source`. supertrend2(factor, atrLength, wicks)   An alternate SuperTrend function to `supertrend()`, which allows a "series float" `atrLength` argument.   Parameters:      factor (float) : (series int/float) Multiplier for the ATR value.      atrLength (float) : (series int/float) Length for the ATR smoothing parameter calculation.      wicks (simple bool) : (simple bool) Condition to determine whether to take candle wicks into account when reversing trend, or to use the close price. Optional. Default is `false`.   Returns: ( [float, int ]) A tuple of the superTrend value and trend direction. vStop(source, atrLength, atrFactor)   Calculates an ATR-based stop value that trails behind the `source`. Can serve as a possible stop-loss guide and trend identifier.   Parameters:      source (float) : (series int/float) Series of values that the stop trails behind.      atrLength (simple int) : (simple int) Length for the ATR smoothing parameter calculation.      atrFactor (float) : (series int/float) The multiplier of the ATR value. Affects the maximum distance between the stop and the `source` value. A value of 1 means the maximum distance is 100% of the ATR value. Optional. The default is 1.   Returns: ( [float, bool ]) A tuple of the volatility stop value and the trend direction as a "bool". vStop2(source, atrLength, atrFactor)   An alternate Volatility Stop function to `vStop()`, which allows a "series float" `atrLength` argument.   Parameters:      source (float) : (series int/float) Series of values that the stop trails behind.      atrLength (float) : (series int/float) Length for the ATR smoothing parameter calculation.      atrFactor (float) : (series int/float) The multiplier of the ATR value. Affects the maximum distance between the stop and the `source` value. A value of 1 means the maximum distance is 100% of the ATR value. Optional. The default is 1.   Returns: ( [float, bool ]) A tuple of the volatility stop value and the trend direction as a "bool". Removed Functions: allTimeHigh(src)   Tracks the highest value of `src` from the first historical bar to the current bar. allTimeLow(src)   Tracks the lowest value of `src` from the first historical bar to the current bar. trima2(src, length)   An alternate Triangular Moving Average (TRIMA) function to `trima()`, which allows a "series int" length argument.
ספריית Pine Script®
מאת ‎TradingView‎
25
Sushi Stock To Flow RainbowHello everyone, as always, I hope you are doing well. To sum up: The stock-to-flow is the number we get when we divide the total stock by the annual production (flow). It indicates how many years are required, at the current production rate, to produce what is in the current stock. The stock is simply the total in circulation, in our case, the number of Sushi in circulation. On the other hand, the flow is the total number of Sushi created each year. In our case: - The number of new sushi issued is reduced every month - The total number of sushi in circulation is set at 250 million - The last reduction will take place in October 2023 The empirical formula of the stock to flow is, in our case: total number of sushi in circulation / number of sushi produced each month.
אינדיקטור Pine Script®
מאת ‎GoldenNaim‎
4