התחל

חפש סקריפטים עבור "pattern"

Chart Patterns Buy Alerts (Intraday) - Bullish Patternschart pattern prediction The script plots two things: predicted_direction → +1 (up) or -1 (down). predicted_value → the next bar’s estimated close price. So on your chart you’ll see: Blue histogram → shows up (+1) or down (-1) prediction. Orange line → predicted next value. Interpret the Output If the blue bar is +1, the model expects the next candle to close higher. If the blue bar is -1, the model expects the next candle to close lower. The orange line shows where it thinks the next close will land.
אינדיקטור Pine Script®
מאת ‎PatternForesight‎
1
Pattern Forecast (Expo)█ Overview The Pattern Forecast indicator is a technical analysis tool that scans historical price data to identify common chart patterns and then analyzes the price movements that followed these patterns. It takes this information and projects it into the future to provide traders with potential price actions that may occur if the same pattern is identified in real-time market data. This projection helps traders to understand the possible outcomes based on the previous occurrences of the pattern, thereby offering a clearer perspective of the market scenario. By analyzing the historical data and understanding the subsequent price movements following the appearance of a specific pattern, the indicator can provide valuable insights into potential future market behavior. █ Calculations The indicator works by scanning historical price data for various candlestick patterns. It includes all in-built TradingView patterns, credit to TradingView that has coded them. Essentially, the indicator takes the historical price moves that followed the pattern to forecast what might happen next. █ Example In this example, the algorithm is set to search for the Inverted Hammer Bullish candlestick pattern. If the pattern is found, the historical outcome is then projected into the future. This helps traders to understand how the past pattern evolved over time. █ How to use Providing traders with a comprehensive understanding of historical patterns and their implications for future price action allows them to assess the likelihood of specific market scenarios objectively. For example, suppose the pattern forecast indicator suggests that a particular pattern is likely to lead to a bullish move in the market. A trader might consider going long if the same pattern is identified in the real-time market. Similarly, a trader might consider shorting the asset if the indicator suggests a bearish move is likely, if the same pattern is identified in the real-time market. █ Settings Pattern Select the pattern that the indicator should scan for. All inbuilt TradingView patterns can be selected. Forecast Candles Number of candles to project into the future. ----------------- Disclaimer The information contained in my Scripts/Indicators/Ideas/Algos/Systems does not constitute financial advice or a solicitation to buy or sell any securities of any type. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information. All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs. My Scripts/Indicators/Ideas/Algos/Systems are only for educational purposes!
אינדיקטור Pine Script®
מאת ‎Zeiierman‎
7
Vanilla ABCD PatternPatterns makes parts of the many predictive tools available to technical analysts, the most simples ones can be easily detected by using scripts. The proposed tool detect the simple (vanilla) form of the ABCD pattern, a pattern aiming to detect potential price swings. The script can use an additional confirmation condition that aim to filter potential false signals. ABCD PATTERN The ABCD pattern is not meant to be detected by analyzing individuals closing price observations but by analyzing longer term movements, this is done by using tools such as zig-zag. Like any pattern the ABCD one comes in different flavors, the simplest being based on the following structures: Once price reach D we can expect a reversal. The classical pattern has the following conditions : BC = 0.618*AB and CD = 1.618*AB , as you can see this condition is based on 0.618 which is a ratio in the Fibonacci sequence. Other conditions are for AB to equal to CD or for CD to be 161.8% longer than AB. Why these conditions ? Cause Fibonacci of course . The ABCD pattern that the proposed tool aim to detect is not based on the zig-zag but only on individual price observations and don't make use of any of the previously described conditions, thus becoming more like a candle pattern. When the label is blue it means that the tool has detected a bullish ABCD pattern, while a red label means that the tool has detected a bearish ABCD pattern. We can't expect patterns based on the analysis of 1,2,3 or 4 closing price observations to predict the reversal of mid/long term movements, this can be seen on the above chart, but we can see some signals predicting short term movements. Since the pattern is based on a noisy variation, using smoother input can result in less signals. Above the tool on BTCUSD using closing price as input. Below the tool using ohlc4 as input: TOOL OPTIONS Being to early can be as devastating as being to late, therefore a confirmation point can be beneficial, the tool allow you to wait for confirmation thus having a potentially better timing. Below is a chart of AMD with no confirmation: As we can see there are many signals with some of them occurring to early, we can fix this by checking the confirmation option: The confirmation is simply based on the candle color, for example if a bearish ABCD pattern has been detected in the past and the closing price is greater than the opening price then the tool return a buy signal. The same apply with a bearish ABCD pattern. The "last bar repaint" option is true by default, this in order to show the bar where the D point of the pattern has been detected, since the closing price of the last bar is constantly changing the signals on the last bar can be constantly appearing/disappearing, unchecking the option will fix this but will no longer the bar where the D point of the pattern has been detected. SUMMARY The pattern is simple and can sometimes be accurate when predicting the direction of future short terms movements. The tool was a request, as it seems i don't post many pattern detectors, well thats true, and the reason is that for me patterns are not super significant, and their detection can be extremely subjective, this is why simple patterns are certainly the only ones worth a look. Don't expect me to post many pattern related indicators in the future ^^'
אינדיקטור Pine Script®
מאת ‎alexgrover‎
16
Adaptive Candlestick Pattern Recognition System█ INTRODUCTION Nearly three years in the making, intermittently worked on in the few spare hours of weekends and time off, this is a passion project I undertook to flesh out my skills as a computer programmer. This script currently recognizes 85 different candlestick patterns ranging from one to five candles in length. It also performs statistical analysis on those patterns to determine prior performance and changes the coloration of those patterns based on that performance. In searching TradingView's script library for scripts similar to this one, I had found a handful. However, when I reviewed the ones which were open source, I did not see many that truly captured the power of PineScrypt or leveraged the way it works to create efficient and reliable code; one of the main driving factors for releasing this 5,000+ line behemoth open sourced. Please take the time to review this description and source code to utilize this script to its fullest potential. █ CONCEPTS This script covers the following topics: Candlestick Theory, Trend Direction, Higher Timeframes, Price Analysis, Statistic Analysis, and Code Design. Candlestick Theory - This script focuses solely on the concept of Candlestick Theory: arrangements of candlesticks may form certain patterns that can potentially influence the future price action of assets which experience those patterns. A full list of patterns (grouped by pattern length) will be in its own section of this description. This script contains two modes of operation for identifying candlestick patterns, 'CLASSIC' and 'BREAKOUT'. CLASSIC: In this mode, candlestick patterns will be identified whenever they appear. The user has a wide variety of inputs to manipulate that can change how certain patterns are identified and even enable alerts to notify themselves when these patterns appear. Each pattern selected to appear will have their Profit or Loss (P/L) calculated starting from the first candle open succeeding the pattern to a candle close specified some number of candles ahead. These P/L calculations are then collected for each pattern, and split among partitions of prior price action of the asset the script is currently applied to (more on that in Higher Timeframes ). BREAKOUT: In this mode, P/L calculations are held off until a breakout direction has been confirmed. The user may specify the number of candles ahead of a pattern's appearance (from one to five) that a pattern has to confirm a breakout in either an upward or downward direction. A breakout is constituted when there is a candle following the appearance of the pattern that closes above/at the highest high of the pattern, or below/at its lowest low. Only then will percent return calculations be performed for the pattern that's been identified, and these percent returns are broken up not only by the partition they had appeared in but also by the breakout direction itself. Patterns which do not breakout in either direction will be ignored, along with having their labels deleted. In both of these modes, patterns may be overridden. Overrides occur when a smaller pattern has been detected and ends up becoming one (or more) of the candles of a larger pattern. A key example of this would be the Bearish Engulfing and the Three Outside Down patterns. A Three Outside Down necessitates a Bearish Engulfing as the first two candles in it, while the third candle closes lower. When a pattern is overridden, the return for that pattern will no longer be tracked. Overrides will not occur if the tail end of a larger pattern occurs at the beginning of a smaller pattern (Ex: a Bullish Engulfing occurs on the third candle of a Three Outside Down and the candle immediately following that pattern, the Three Outside Down pattern will not be overridden). Important Functionality Note: These patterns are only searched for at the most recently closed candle, not on the currently closing candle, which creates an offset of one for this script's execution. (SEE LIMITATIONS) Trend Direction - Many of the patterns require a trend direction prior to their appearance. Noting TradingView's own publication of candlestick patterns, I utilize a similar method for determining trend direction. Moving Averages are used to determine which trend is currently taking place for candlestick patterns to be sought out. The user has access to two Moving Averages which they may individually modify the following for each: Moving Average type (list of 9), their length, width, source values, and all variables associated with two special Moving Averages (Least Squares and Arnaud Legoux). There are 3 settings for these Moving Averages, the first two switch between the two Moving Averages, and the third uses both. When using individual Moving Averages, the user may select a 'price point' to compare against the Moving Average (default is close). This price point is compared to the Moving Average at the candles prior to the appearance of candle patterns. Meaning: The close compared to the Moving Average two candles behind determines the trend direction used for Candlestick Analysis of one candle patterns; three candles behind for two candle patterns and so on. If the selected price point is above the Moving Average, then the current trend is an 'uptrend', 'downtrend' otherwise. The third setting using both Moving Averages will compare the lengths of each, and trend direction is determined by the shorter Moving Average compared to the longer one. If the shorter Moving Average is above the longer, then the current trend is an 'uptrend', 'downtrend' otherwise. If the lengths of the Moving Averages are the same, or both Moving Averages are Symmetrical, then MA1 will be used by default. (SEE LIMITATIONS) Higher Timeframes - This script employs the use of Higher Timeframes with a few request.security calls. The purpose of these calls is strictly for the partitioning of an asset's chart, splitting the returns of patterns into three separate groups. The four inputs in control of this partitioning split the chart based on: A given resolution to grab values from, the length of time in that resolution, and 'Upper' and 'Lower Limits' which split the trading range provided by that length of time in that resolution that forms three separate groups. The default values for these four inputs will partition the current chart by the yearly high-low range where: the 'Upper' partition is the top 20% of that trading range, the 'Middle' partition is 80% to 33% of the trading range, and the 'Lower' partition covers the trading range within 33% of the yearly low. Patterns which are identified by this script will have their returns grouped together based on which partition they had appeared in. For example, a Bullish Engulfing which occurs within a third of the yearly low will have its return placed separately from a Bullish Engulfing that occurred within 20% of the yearly high. The idea is that certain patterns may perform better or worse depending on when they had occurred during an asset's trading range. Price Analysis - Price Analysis is a major part of this script's functionality as it can fundamentally change how patterns are shown to the user. The settings related to Price Analysis include setting the number of candles ahead of a pattern's appearance to determine the return of that pattern. In 'BREAKOUT' mode, an additional setting allows the user to specify where the P/L calculation will begin for a pattern that had appeared and confirmed. (SEE LIMITATIONS) The calculation for percent returns of patterns is illustrated with the following pseudo-code (CLASSIC mode, this is a simplified version of the actual code): type patternObj int ID int partition type returnsArray float returns // No pattern found = na returned patternObj TEST_VAL = f_FindPattern() priorTestVal = TEST_VAL if not na( priorTestVal ) pnlMatrixRow = priorTestVal.ID pnlMatrixCol = priorTestVal.partition matrixReturn = matrix.get(PERCENT_RETURNS, pnlMatrixRow, pnlMatrixCol) percentReturn = ( (close - open ) / open ) * 100% array.push(matrixReturn.returns, percentReturn) Statistic Analysis - This script uses Pine's built-in array functions to conduct the Statistic Analysis for patterns. When a pattern is found and its P/L calculation is complete, its return is added to a 'Return Array' User-Defined-Type that contains numerous fields which retain information on a pattern's prior performance. The actual UDT is as follows: type returnArray float returns = na int size = 0 float avg = 0 float median = 0 float stdDev = 0 int polarities = na All values within this UDT will be updated when a return is added to it (some based on user input). The array.avg , array.median and array.stdev will be ran and saved into their respective fields after a return is placed in the 'returns' array. The 'polarities' integer array is what will be changed based on user input. The user specifies two different percentages that declare 'Positive' and 'Negative' returns for patterns. When a pattern returns above, below, or in between these two values, different indices of this array will be incremented to reflect the kind of return that pattern had just experienced. These values (plus the full name, partition the pattern occurred in, and a 95% confidence interval of expected returns) will be displayed to the user on the tooltip of the labels that identify patterns. Simply scroll over the pattern label to view each of these values. Code Design - Overall this script is as much of an art piece as it is functional. Its design features numerous depictions of ASCII Art that illustrate what is being attempted by the functions that identify patterns, and an incalculable amount of time was spent rewriting portions of code to improve its efficiency. Admittedly, this final version is nearly 1,000 lines shorter than a previous version (one which took nearly 30 seconds after compilation to run, and didn't do nearly half of what this version does). The use of UDTs, especially the 'patternObj' one crafted and redesigned from the Hikkake Hunter 2.0 I published last month, played a significant role in making this script run efficiently. There is a slight rigidity in some of this code mainly around pattern IDs which are responsible for displaying the abbreviation for patterns (as well as the full names under the tooltips, and the matrix row position for holding returns), as each is hard-coded to correspond to that pattern. However, one thing I would like to mention is the extensive use of global variables for pattern detection. Many scripts I had looked over for ideas on how to identify candlestick patterns had the same idea; break the pattern into a set of logical 'true/false' statements derived from historically referencing candle OHLC values. Some scripts which identified upwards of 20 to 30 patterns would reference Pine's built-in OHLC values for each pattern individually, potentially requesting information from TradingView's servers numerous times that could easily be saved into a variable for re-use and only requested once per candle (what this script does). █ FEATURES This script features a massive amount of switches, options, floating point values, detection settings, and methods for identifying/tailoring pattern appearances. All modifiable inputs for patterns are grouped together based on the number of candles they contain. Other inputs (like those for statistics settings and coloration) are grouped separately and presented in a way I believe makes the most sense. Not mentioned above is the coloration settings. One of the aims of this script was to make patterns visually signify their behavior to the user when they are identified. Each pattern has its own collection of returns which are analyzed and compared to the inputs of the user. The user may choose the colors for bullish, neutral, and bearish patterns. They may also choose the minimum number of patterns needed to occur before assigning a color to that pattern based on its behavior; a color for patterns that have not met this minimum number of occurrences yet, and a color for patterns that are still processing in BREAKOUT mode. There are also an additional three settings which alter the color scheme for patterns: Statistic Point-of-Reference, Adaptive coloring, and Hard Limiting. The Statistic Point-of-Reference decides which value (average or median) will be compared against the 'Negative' and 'Positive Return Tolerance'(s) to guide the coloration of the patterns (or for Adaptive Coloring, the generation of a color gradient). Adaptive Coloring will have this script produce a gradient that patterns will be colored along. The more bullish or bearish a pattern is, the further along the gradient those patterns will be colored starting from the 'Neutral' color (hard lined at the value of 0%: values above this will be colored bullish, bearish otherwise). When Adaptive Coloring is enabled, this script will request the highest and lowest values (these being the Statistic Point-of-Reference) from the matrix containing all returns and rewrite global variables tied to the negative and positive return tolerances. This means that all patterns identified will be compared with each other to determine bullish/bearishness in Adaptive Coloring. Hard Limiting will prevent these global variables from being rewritten, so patterns whose Statistic Point-of-Reference exceed the return tolerances will be fully colored the bullish or bearish colors instead of a generated gradient color. (SEE LIMITATIONS) Apart from the Candle Detection Modes (CLASSIC and BREAKOUT), there's an additional two inputs which modify how this script behaves grouped under a "MASTER DETECTION SETTINGS" tab. These two "Pattern Detection Settings" are 'SWITCHBOARD' and 'TARGET MODE'. SWITCHBOARD: Every single pattern has a switch that is associated with its detection. When a switch is enabled, the code which searches for that pattern will be run. With the Pattern Detection Setting set to this, all patterns that have their switches enabled will be sought out and shown. TARGET MODE: There is an additional setting which operates on top of 'SWITCHBOARD' that singles out an individual pattern the user specifies through a drop down list. The names of every pattern recognized by this script will be present along with an identifier that shows the number of candles in that pattern (Ex: " (# candles)"). All patterns enabled in the switchboard will still have their returns measured, but only the pattern selected from the "Target Pattern" list will be shown. (SEE LIMITATIONS) The vast majority of other features are held in the one, two, and three candle pattern sections. For one-candle patterns, there are: 3 — Settings related to defining 'Tall' candles: The number of candles to sample for previous candle-size averages. The type of comparison done for 'Tall' Candles: Settings are 'RANGE' and 'BODY'. The 'Tolerance' for tall candles, specifying what percent of the 'average' size candles must exceed to be considered 'Tall'. When 'Tall Candle Setting' is set to RANGE, the high-low ranges are what the current candle range will be compared against to determine if a candle is 'Tall'. Otherwise the candle bodies (absolute value of the close - open) will be compared instead. (SEE LIMITATIONS) Hammer Tolerance - How large a 'discarded wick' may be before it disqualifies a candle from being a 'Hammer'. Discarded wicks are compared to the size of the Hammer's candle body and are dependent upon the body's center position. Hammer bodies closer to the high of the candle will have the upper wick used as its 'discarded wick', otherwise the lower wick is used. 9 — Doji Settings, some pulled from an old Doji Hunter I made a while back: Doji Tolerance - How large the body of a candle may be compared to the range to be considered a 'Doji'. Ignore N/S Dojis - Turns off Trend Direction for non-special Dojis. GS/DF Doji Settings - 2 Inputs that enable and specify how large wicks that typically disqualify Dojis from being 'Gravestone' or 'Dragonfly' Dojis may be. 4 Settings related to 'Long Wick Doji' candles detailed below. A Tolerance for 'Rickshaw Man' Dojis specifying how close the center of the body must be to the range to be valid. The 4 settings the user may modify for 'Long Legged' Dojis are: A Sample Base for determining the previous average of wicks, a Sample Length specifying how far back to look for these averages, a Behavior Setting to define how 'Long Legged' Dojis are recognized, and a tolerance to specify how large in comparison to the prior wicks a Doji's wicks must be to be considered 'Long Legged'. The 'Sample Base' list has two settings: RANGE: The wicks of prior candles are compared to their candle ranges and the 'wick averages' will be what the average percent of ranges were in the sample. WICKS: The size of the wicks themselves are averaged and returned for comparing against the current wicks of a Doji. The 'Behavior' list has three settings: ONE: Only one wick length needs to exceed the average by the tolerance for a Doji to be considered 'Long Legged'. BOTH: Both wick lengths need to exceed the average of the tolerance of their respective wicks (upper wicks are compared to upper wicks, lower wicks compared to lower) to be considered 'Long Legged'. AVG: Both wicks and the averages of the previous wicks are added together, divided by two, and compared. If the 'average' of the current wicks exceeds this combined average of prior wicks by the tolerance, then this would constitute a valid 'Long Legged' Doji. (For Dojis in general - SEE LIMITATIONS) The final input is one related to candle patterns which require a Marubozu candle in them. The two settings for this input are 'INCLUSIVE' and 'EXCLUSIVE'. If INCLUSIVE is selected, any opening/closing variant of Marubozu candles will be allowed in the patterns that require them. For two-candle patterns, there are: 2 — Settings which define 'Engulfing' parameters: Engulfing Setting - Two options, RANGE or BODY which sets up how one candle may 'engulf' the previous. Inclusive Engulfing - Boolean which enables if 'engulfing' candles can be equal to the values needed to 'engulf' the prior candle. For the 'Engulfing Setting': RANGE: If the second candle's high-low range completely covers the high-low range of the prior candle, this is recognized as 'engulfing'. BODY: If the second candle's open-close completely covers the open-close of the previous candle, this is recognized as 'engulfing'. (SEE LIMITATIONS) 4 — Booleans specifying different settings for a few patterns: One which allows for 'opens within body' patterns to let the second candle's open/close values match the prior candles' open/close. One which forces 'Kicking' patterns to have a gap if the Marubozu setting is set to 'INCLUSIVE'. And Two which dictate if the individual candles in 'Stomach' patterns need to be 'Tall'. 8 — Floating point values which affect 11 different patterns: One which determines the distance the close of the first candle in a 'Hammer Inverted' pattern must be to the low to be considered valid. One which affects how close the opens/closes need to be for all 'Lines' patterns (Bull/Bear Meeting/Separating Lines). One that allows some leeway with the 'Matching Low' pattern (gives a small range the second candle close may be within instead of needing to match the previous close). Three tolerances for On Neck/In Neck patterns (2 and 1 respectively). A tolerance for the Thrusting pattern which give a range the close the second candle may be between the midpoint and close of the first to be considered 'valid'. A tolerance for the two Tweezers patterns that specifies how close the highs and lows of the patterns need to be to each other to be 'valid'. The first On Neck tolerance specifies how large the lower wick of the first candle may be (as a % of that candle's range) before the pattern is invalidated. The second tolerance specifies how far up the lower wick to the close the second candle's close may be for this pattern. The third tolerance for the In Neck pattern determines how far into the body of the first candle the second may close to be 'valid'. For the remaining patterns (3, 4, and 5 candles), there are: 3 — Settings for the Deliberation pattern: A boolean which forces the open of the third candle to gap above the close of the second. A tolerance which changes the proximity of the third candle's open to the second candle's close in this pattern. A tolerance that sets the maximum size the third candle may be compared to the average of the first two candles. One boolean value for the Two Crows patterns (standard and Upside Gapping) that forces the first two candles in the patterns to completely gap if disabled (candle 1's close < candle 2's low). 10 — Floating point values for the remaining patterns: One tolerance for defining how much the size of each candle in the Identical Black Crows pattern may deviate from the average of themselves to be considered valid. One tolerance for setting how close the opens/closes of certain three candle patterns may be to each other's opens/closes.* Three floating point values that affect the Three Stars in the South pattern. One tolerance for the Side-by-Side patterns - looks at the second and third candle closes. One tolerance for the Stick Sandwich pattern - looks at the first and third candle closes. A floating value that sizes the Concealing Baby Swallow pattern's 3rd candle wick. Two values for the Ladder Bottom pattern which define a range that the third candle's wick size may be. * This affects the Three Black Crows (non-identical) and Three White Soldiers patterns, each require the opens and closes of every candle to be near each other. The first tolerance of the Three Stars in the South pattern affects the first candle body's center position, and defines where it must be above to be considered valid. The second tolerance specifies how close the second candle must be to this same position, as well as the deviation the ratio the candle body to its range may be in comparison to the first candle. The third restricts how large the second candle range may be in comparison to the first (prevents this pattern from being recognized if the second candle is similar to the first but larger). The last two floating point values define upper and lower limits to the wick size of a Ladder Bottom's fourth candle to be considered valid. █ HOW TO USE While there are many moving parts to this script, I attempted to set the default values with what I believed may help identify the most patterns within reasonable definitions. When this script is applied to a chart, the Candle Detection Mode (along with the BREAKOUT settings) and all candle switches must be confirmed before patterns are displayed. All switches are on by default, so this gives the user an opportunity to pick which patterns to identify first before playing around in the settings. All of the settings/inputs described above are meant for experimentation. I encourage the user to tweak these values at will to find which set ups work best for whichever charts they decide to apply these patterns to. Refer to the patterns themselves during experimentation. The statistic information provided on the tooltips of the patterns are meant to help guide input decisions. The breadth of candlestick theory is deep, and this was an attempt at capturing what I could in its sea of information. █ LIMITATIONS DISCLAIMER: While it may seem a bit paradoxical that this script aims to use past performance to potentially measure future results, past performance is not indicative of future results . Markets are highly adaptive and often unpredictable. This script is meant as an informational tool to show how patterns may behave. There is no guarantee that confidence intervals (or any other metric measured with this script) are accurate to the performance of patterns; caution must be exercised with all patterns identified regardless of how much information regarding prior performance is available. Candlestick Theory - In the name, Candlestick Theory is a theory , and all theories come with their own limits. Some patterns identified by this script may be completely useless/unprofitable/unpredictable regardless of whatever combination of settings are used to identify them. However, if I truly believed this theory had no merit, this script would not exist. It is important to understand that this is a tool meant to be utilized with an array of others to procure positive (or negative, looking at you, short sellers ) results when navigating the complex world of finance. To address the functionality note however, this script has an offset of 1 by default. Patterns will not be identified on the currently closing candle, only on the candle which has most recently closed. Attempting to have this script do both (offset by one or identify on close) lead to more trouble than it was worth. I personally just want users to be aware that patterns will not be identified immediately when they appear. Trend Direction - Moving Averages - There is a small quirk with how MA settings will be adjusted if the user inputs two moving averages of the same length when the "MA Setting" is set to 'BOTH'. If Moving Averages have the same length, this script will default to only using MA 1 regardless of if the types of Moving Averages are different . I will experiment in the future to alleviate/reduce this restriction. Price Analysis - BREAKOUT mode - With how identifying patterns with a look-ahead confirmation works, the percent returns for patterns that break out in either direction will be calculated on the same candle regardless of if P/L Offset is set to 'FROM CONFIRMATION' or 'FROM APPEARANCE'. This same issue is present in the Hikkake Hunter script mentioned earlier. This does not mean the P/L calculations are incorrect , the offset for the calculation is set by the number of candles required to confirm the pattern if 'FROM APPEARANCE' is selected. It just means that these two different P/L calculations will complete at the same time independent of the setting that's been selected. Adaptive Coloring/Hard Limiting - Hard Limiting is only used with Adaptive Coloring and has no effect outside of it. If Hard Limiting is used, it is recommended to increase the 'Positive' and 'Negative' return tolerance values as a pattern's bullish/bearishness may be disproportionately represented with the gradient generated under a hard limit. TARGET MODE - This mode will break rules regarding patterns that are overridden on purpose. If a pattern selected in TARGET mode would have otherwise been absorbed by a larger pattern, it will have that pattern's percent return calculated; potentially leading to duplicate returns being included in the matrix of all returns recognized by this script. 'Tall' Candle Setting - This is a wide-reaching setting, as approximately 30 different patterns or so rely on defining 'Tall' candles. Changing how 'Tall' candles are defined whether by the tolerance value those candles need to exceed or by the values of the candle used for the baseline comparison (RANGE/BODY) can wildly affect how this script functions under certain conditions. Refer to the tooltip of these settings for more information on which specific patterns are affected by this. Doji Settings - There are roughly 10 or so two to three candle patterns which have Dojis as a part of them. If all Dojis are disabled, it will prevent some of these larger patterns from being recognized. This is a dependency issue that I may address in the future. 'Engulfing' Setting - Functionally, the two 'Engulfing' settings are quite different. Because of this, the 'RANGE' setting may cause certain patterns that would otherwise be valid under textbook and online references/definitions to not be recognized as such (like the Upside Gap Two Crows or Three Outside down). █ PATTERN LIST This script recognizes 85 patterns upon initial release. I am open to adding additional patterns to it in the future and any comments/suggestions are appreciated. It recognizes: 15 — 1 Candle Patterns 4 Hammer type patterns: Regular Hammer, Takuri Line, Shooting Star, and Hanging Man 9 Doji Candles: Regular Dojis, Northern/Southern Dojis, Gravestone/Dragonfly Dojis, Gapping Up/Down Dojis, and Long-Legged/Rickshaw Man Dojis White/Black Long Days 32 — 2 Candle Patterns 4 Engulfing type patterns: Bullish/Bearish Engulfing and Last Engulfing Top/Bottom Dark Cloud Cover Bullish/Bearish Doji Star patterns Hammer Inverted Bullish/Bearish Haramis + Cross variants Homing Pigeon Bullish/Bearish Kicking 4 Lines type patterns: Bullish/Bearish Meeting/Separating Lines Matching Low On/In Neck patterns Piercing pattern Shooting Star (2 Lines) Above/Below Stomach patterns Thrusting Tweezers Top/Bottom patterns Two Black Gapping Rising/Falling Window patterns 29 — 3 Candle Patterns Bullish/Bearish Abandoned Baby patterns Advance Block Collapsing Doji Star Deliberation Upside/Downside Gap Three Methods patterns Three Inside/Outside Up/Down patterns (4 total) Bullish/Bearish Side-by-Side patterns Morning/Evening Star patterns + Doji variants Stick Sandwich Downside/Upside Tasuki Gap patterns Three Black Crows + Identical variation Three White Soldiers Three Stars in the South Bullish/Bearish Tri-Star patterns Two Crows + Upside Gap variant Unique Three River Bottom 3 — 4 Candle Patterns Concealing Baby Swallow Bullish/Bearish Three Line Strike patterns 6 — 5 Candle Patterns Bullish/Bearish Breakaway patterns Ladder Bottom Mat Hold Rising/Falling Three Methods patterns █ WORKS CITED Because of the amount of time needed to complete this script, I am unable to provide exact dates for when some of these references were used. I will also not provide every single reference, as citing a reference for each individual pattern and the place it was reviewed would lead to a bibliography larger than this script and its description combined. There were five major resources I used when building this script, one book, two websites (for various different reasons including patterns, moving averages, and various other articles of information), various scripts from TradingView's public library (including TradingView's own source code for *all* candle patterns ), and PineScrypt's reference manual. Bulkowski, Thomas N. Encyclopedia of Candlestick Patterns . Hoboken, New Jersey: John Wiley & Sons Inc., 2008. E-book (google books). Various. Numerous webpages. CandleScanner . 2023. online. Accessed 2020 - 2023. Various. Numerous webpages. Investopedia . 2023. online. Accessed 2020 - 2023. █ AKNOWLEDGEMENTS I want to take the time here to thank all of my friends and family, both online and in real life, for the support they've given me over the last few years in this endeavor. My pets who tried their hardest to keep me from completing it. And work for the grit to continue pushing through until this script's completion. This belongs to me just as much as it does anyone else. Whether you are an institutional trader, gold bug hedging against the dollar, retail ape who got in on a squeeze, or just parents trying to grow their retirement/save for the kids. This belongs to everyone. Private Beta for new features to be tested can be found here . Vires In Numeris
אינדיקטור Pine Script®
מאת ‎SolCollector‎
44
ABCD Harmonic Pattern Strategy (Bull + Bear) This script is a strategy implementation of the classic ABCD Harmonic Pattern, designed for market structure analysis, backtesting, and educational research. The ABCD pattern is one of the foundational harmonic price patterns in technical analysis. Its Fibonacci ratio relationships were formalized and standardized within harmonic trading theory by Scott M. Carney, whose work helped define modern harmonic pattern rules. This strategy is conceptually inspired by educational ABCD pattern logic shared by the TradingView author theEccentricTrader. The code, structure, execution logic, filters, and risk management have been independently developed, reconstructed, and extended into a complete TradingView strategy. What this strategy does Detects bullish and bearish ABCD harmonic patterns based on price structure and Fibonacci ratios. Reconstructs ABCD market structure logic for both directions instead of using a simple visual inversion. Draws the ABCD legs, structure labels (A, B, C, D), and projection levels directly on the chart. Generates long and short trade entries using confirmed ABCD structures. Includes optional confluence filters, such as: Higher-timeframe EMA trend filter RSI strength filter ATR volatility filter Volume confirmation Candle body confirmation Minimum bounce distance from point D Provides built-in risk management, including: Configurable Stop Loss Configurable Take Profit Optional trailing stop Designed for backtesting, parameter optimization, and analytical research. Why this strategy is different This script is not a simple indicator conversion nor a basic bullish/bearish mirror. The ABCD pattern logic has been recreated at the structural level to better reflect how bullish and bearish market formations behave in real price action. Key differences Reconstructed bullish and bearish structures Bullish and bearish ABCD patterns are independently defined using market structure logic, not just inverted visually. Each direction has its own pivot relationships and validation rules to produce a more faithful representation of the ABCD pattern. Structure-aware pattern validation Pattern confirmation is based on price swings, structure continuity, and Fibonacci alignment, helping reduce distorted or forced patterns. Strategy-based execution Unlike indicator-only ABCD tools that only visualize patterns, this script uses strategy.entry and strategy.exit, enabling full backtesting and performance analysis. Confluence-driven entries Trade entries can require multiple confirmation layers beyond the pattern itself, helping reduce low-quality signals and overtrading. Integrated risk management Stop Loss, Take Profit, and optional trailing logic are applied consistently for both long and short positions. Non-repainting design Pattern detection and entries rely on confirmed bars (barstate.isconfirmed) and higher-timeframe data with lookahead_off, ensuring signals do not repaint historically. Improved and controlled visualization Pattern drawings, projections, and entry markers are managed with strict object limits to comply with TradingView performance and publishing requirements. How to use Add the strategy to a chart and select a symbol and timeframe. Enable or disable filters under “Entry Filters (Confluence)”. Configure Stop Loss, Take Profit, and trailing behavior under “TP/SL”. Use pattern drawings and entry markers as visual and analytical confirmation, not as standalone trade signals. Important notes This script is provided for educational and research purposes only. It does not provide financial or investment advice. No profitability or performance is implied or guaranteed. Past performance does not indicate future results. Always test across multiple markets and timeframes and apply proper risk management. Credits ABCD Harmonic Pattern: Harmonic trading principles as formalized by Scott M. Carney. Conceptual inspiration: Educational ABCD pattern logic shared by @theEccentricTrader on TradingView. Pattern reconstruction, strategy logic, and risk management: Independent development.
אסטרטגיית Pine Script®
מאת ‎TagsTrading‎
Smart Candlestick Pattern Filter [MarkitTick]💡 This Script is a sophisticated technical analysis tool designed to identify, grade, and display over 40 distinct candlestick formations based on a proprietary strength and context filtering system. Unlike standard pattern finders that often clutter charts with conflicting signals, this script utilizes a hierarchy logic to display only the most significant pattern detected on any given candle, ensuring chart clarity and actionable data. ● Originality and Utility The primary utility of this script lies in its filtering engine. Standard indicators often flag every minor Doji or Spinning Top, creating noise. This indicator categorizes patterns into five distinct levels of strength, ranging from simple indecision to very strong reversal or continuation signals. Furthermore, it incorporates a Trend Context filter, which checks the relationship between price and a Simple Moving Average (SMA). This ensures that reversal patterns (like Hammers) are prioritized during downtrends, while continuation patterns are highlighted during established moves, reducing false positives. ● Methodology The indicator evaluates price action using specific ratios between the Open, High, Low, and Close, alongside the body size relative to the total range. It assigns a strength score to each detected pattern. • Pattern Strength Grading Strength 1 (Indecision): Includes patterns like Doji, Spinning Tops, Dragonfly, and Gravestone Dojis. These signal a pause in momentum. Strength 2 (Weak): Includes patterns like Hanging Man, Inverted Hammer, Belt Holds, and In-Neck lines. These suggest potential movement but often require confirmation. Strength 3 (Moderate): Includes classic reversals like Hammers, Shooting Stars, Haramis, Dark Cloud Cover, and Piercing Lines. Strength 4 (Strong): Includes major signals like Engulfing patterns, Morning/Evening Stars, and Marubozu candles. Strength 5 (Very Strong): Reserved for rare, high-probability multi-candle formations like Three White Soldiers, Three Black Crows, Rising/Falling Three Methods, and Breakaway gaps. The script calculates all potential patterns for the current bar and then compares their strength scores. Only the pattern with the highest strength is displayed. If the Show Trend Context option is enabled, the script further validates the pattern against the current market direction (determined by the SMA and slope) before plotting. ● How to Use Traders can use this tool to identify potential entry and exit points based on the strength of the signal. • Visual Signals Patterns are labeled directly on the chart: Green Labels/Text: Indicate Bullish patterns. Red Labels/Text: Indicate Bearish patterns. Gray/White Labels: Indicate Indecision or Weak patterns. Hovering over any label provides the full name of the pattern and its strength rating (e.g., "Bullish Engulfing - Strength: Strong"). • Trading Logic High Strength Signals (Levels 4-5): These can be used as primary triggers for trend reversals or strong continuations. Moderate Signals (Level 3): Useful for adding confluence to existing analysis or anticipating a setup. Indecision (Level 1): Often useful for taking profits or tightening stop-losses, as they indicate the current trend may be stalling. ● Settings Show Only Strong Patterns: When enabled, filters out Strength 1, 2, and 3, showing only the most significant signals (Strength >= 4). Max Patterns to Display: Limits the number of historical labels to prevent chart clutter. Max Candles to Check Engulfing: Adjusts how far back the script looks to validate the size of an engulfing candle. Trend Detection Period: Sets the length of the SMA used to determine the background trend context. Show Only Trend-Appropriate Patterns: If checked, bullish reversals are only shown in downtrends, and bearish reversals in uptrends. ● Disclaimer All provided scripts and indicators are strictly for educational exploration and must not be interpreted as financial advice or a recommendation to execute trades. I expressly disclaim all liability for any financial losses or damages that may result, directly or indirectly, from the reliance on or application of these tools. Market participation carries inherent risk where past performance never guarantees future returns, leaving all investment decisions and due diligence solely at your own discretion.
אינדיקטור Pine Script®
מאת ‎MarkitTick‎
8
AiTrend Pattern Matrix for kNN Forecasting (AiBitcoinTrend)The AiTrend Pattern Matrix for kNN Forecasting (AiBitcoinTrend) is a cutting-edge indicator that combines advanced mathematical modeling, AI-driven analytics, and segment-based pattern recognition to forecast price movements with precision. This tool is designed to provide traders with deep insights into market dynamics by leveraging multivariate pattern detection and sophisticated predictive algorithms. 👽 Core Features Segment-Based Pattern Recognition At its heart, the indicator divides price data into discrete segments, capturing key elements like candle bodies, high-low ranges, and wicks. These segments are normalized using ATR-based volatility adjustments to ensure robustness across varying market conditions. AI-Powered k-Nearest Neighbors (kNN) Prediction The predictive engine uses the kNN algorithm to identify the closest historical patterns in a multivariate dictionary. By calculating the distance between current and historical segments, the algorithm determines the most likely outcomes, weighting predictions based on either proximity (distance) or averages. Dynamic Dictionary of Historical Patterns The indicator maintains a rolling dictionary of historical patterns, storing multivariate data for: Candle body ranges, High-low ranges, Wick highs and lows. This dynamic approach ensures the model adapts continuously to evolving market conditions. Volatility-Normalized Forecasting Using ATR bands, the indicator normalizes patterns, reducing noise and enhancing the reliability of predictions in high-volatility environments. AI-Driven Trend Detection The indicator not only predicts price levels but also identifies market regimes by comparing current conditions to historically significant highs, lows, and midpoints. This allows for clear visualizations of trend shifts and momentum changes. 👽 Deep Dive into the Core Mathematics 👾 Segment-Based Multivariate Pattern Analysis The indicator analyzes price data by dividing each bar into distinct segments, isolating key components such as: Body Ranges: Differences between the open and close prices. High-Low Ranges: Capturing the full volatility of a bar. Wick Extremes: Quantifying deviations beyond the body, both above and below. Each segment contributes uniquely to the predictive model, ensuring a rich, multidimensional understanding of price action. These segments are stored in a rolling dictionary of patterns, enabling the indicator to reference historical behavior dynamically. 👾 Volatility Normalization Using ATR To ensure robustness across varying market conditions, the indicator normalizes patterns using Average True Range (ATR). This process scales each component to account for the prevailing market volatility, allowing the algorithm to compare patterns on a level playing field regardless of differing price scales or fluctuations. 👾 k-Nearest Neighbors (kNN) Algorithm The AI core employs the kNN algorithm, a machine-learning technique that evaluates the similarity between the current pattern and a library of historical patterns. Euclidean Distance Calculation: The indicator computes the multivariate distance across four distinct dimensions: body range, high-low range, wick low, and wick high. This ensures a comprehensive and precise comparison between patterns. Weighting Schemes: The contribution of each pattern to the forecast is either weighted by its proximity (distance) or averaged, based on user settings. 👾 Prediction Horizon and Refinement The indicator forecasts future price movements (Y_hat) by predicting logarithmic changes in the price and projecting them forward using exponential scaling. This forecast is smoothed using a user-defined EMA filter to reduce noise and enhance actionable clarity. 👽 AI-Driven Pattern Recognition Dynamic Dictionary of Patterns: The indicator maintains a rolling dictionary of N multivariate patterns, continuously updated to reflect the latest market data. This ensures it adapts seamlessly to changing market conditions. Nearest Neighbor Matching: At each bar, the algorithm identifies the most similar historical pattern. The prediction is based on the aggregated outcomes of the closest neighbors, providing confidence levels and directional bias. Multivariate Synthesis: By combining multiple dimensions of price action into a unified prediction, the indicator achieves a level of depth and accuracy unattainable by single-variable models. Visual Outputs Forecast Line (Y_hat_line): A smoothed projection of the expected price trend, based on the weighted contribution of similar historical patterns. Trend Regime Bands: Dynamic high, low, and midlines highlight the current market regime, providing actionable insights into momentum and range. Historical Pattern Matching: The nearest historical pattern is displayed, allowing traders to visualize similarities 👽 Applications Trend Identification: Detect and follow emerging trends early using dynamic trend regime analysis. Reversal Signals: Anticipate market reversals with high-confidence predictions based on historically similar scenarios. Range and Momentum Trading: Leverage multivariate analysis to understand price ranges and momentum, making it suitable for both breakout and mean-reversion strategies. Disclaimer: This information is for entertainment purposes only and does not constitute financial advice. Please consult with a qualified financial advisor before making any investment decisions.
אינדיקטור Pine Script®
מאת ‎aibitcointrend‎
8
Harmonic Pattern Detector (75 patterns)Harmonic Pattern Detector offers a record amount of "Harmonic Patterns" in one script, with 75 different patterns detected, together with up to 99 different swing lengths. 🔶 USAGE Harmonic Patterns are detected from several different ZigZag lines, derived from Swings with different lengths (shorter - longer term) Depending on the settings ' Minimum/Maximum Swing Length ', the user will see more or less patterns from shorter and/or longer-term swing points. 🔹 Fibonacci Ratio Certain patterns have only one ratio for a specific retrace/extension instead of one upper and one lower limit. In this case, we add a ' Tolerance ', which adds a percentage tolerance below/above the ratio, creating two limits. A higher number may show more patterns but may become less valid. Hoovering over points B, C, and D will show a tooltip with the concerning limits; adjusted limits will be seen if applicable. Tooltips in settings will also show which patterns the Fibonacci Ratio applies to. 🔹 Triangle Area Ratio Using Heron's formula , the triangle area is calculated after the X-Y axis is normalized. Users can filter patterns based on the ratio of the smallest triangle to the largest triangle. A lower Triangle Area Ratio number leads to more symmetrical patterns but may appear less frequently. 🔶 DETAILS Harmonic patterns are based on geometric patterns, where the retracement/extension of a swing point must be located between specific Fibonacci ratios of the previous swing/leg. Different Harmonic Patterns require unique ratios to become valid patterns. In the above example there is a valid 'Max Butterfly' pattern where: Point B is located between 0.618 - 0.886 retracement level of the X-A leg Point C is located between 0.382 - 0.886 retracement level of the A-B leg Point D is located between 1.272 - 2.618 extension level of the B-C leg Point D is located between 1.272 - 1.618 extension level of the X-A leg Harmonic Pattern Detector uses ZigZag lines, where swing highs and swing lows alternate. Each ZigZag line is checked for valid Harmonic Patterns . When multiple types of Harmonic Patterns are valid for the same sequence, the pattern will be named after the first one found. Different swing lengths form different ZigZag lines. By evaluating different ZigZag lines (up to 99!), shorter—and longer-term patterns can be drawn on the same chart. 🔹 Blocks The patterns are organized into blocks that can be toggled on or off with a single click. When a block is enabled, the user can still select which specific patterns within that block are enabled or disabled. 🔹 Visuals Besides color settings, labels can show pattern names or arrows at point D of the pattern. Note this will happen 1 bar after validation because one extra bar is needed for confirmation. An option is included to show only arrows without the patterns. 🔹 Updated Patterns When a Swing Low is followed by a lower low or a Swing High followed by a higher high , triggering a pattern identical to a previous one except with a different point D, the pattern will be updated. The previous C-D line will be visible as a dashed line to highlight the event. Only the last dashed line is shown when this happens more than once. 🔹 Optimization The script only verifies the last leg in the initial phase, significantly reducing the time spent on pattern validation. If this leg doesn't align with a potential  Harmonic Pattern , the pattern is immediately disregarded. In the subsequent phase, the remaining patterns are quickly scrutinized to ensure the next leg is valid. This efficient process continues, with only valid patterns progressing to the next phase until all sequences have been thoroughly examined. This process can check up to 99 ZigZag lines for 75 different Harmonic Patterns , showcasing its high capacity and versatility. 🔹 Ratios The following table shows the different ratios used for each Harmonic Pattern . ' min ' and ' max ' are used when only one limit is provided instead of 2. This limit is given a percentage tolerance above and below, customizable by the setting ' Tolerance - Fibonacci Ratio '. For example a ratio of 0.618 with a tolerance of 1% would result in: an upper limit of 0.624 a lower limit of 0.612 |-------------------|------------------------|------------------------|-----------------------|-----------------------| | NAME PATTERN | BCD (BD) | ABC (AC) | XAB (XB) | XAD (XD) | | | min max | min max | min max | min max | |-------------------|------------------------|------------------------|-----------------------|-----------------------| | 'ABCD' | 1.272 - 1.618 | 0.618 - 0.786 | | | | '5-0' | 0.5 *min - 0.5 *max | 1.618 - 2.24 | 1.13 - 1.618 | | | 'Max Gartley' | 1.128 - 2.236 | 0.382 - 0.886 | 0.382 - 0.618 | 0.618 - 0.786 | | 'Gartley' | 1.272 - 1.618 | 0.382 - 0.886 | 0.618*min - 0.618*max | 0.786*min - 0.786*max | | 'A Gartley' | 1.618*min - 1.618*max | 1.128 - 2.618 | 0.618 - 0.786 | 1.272*min - 1.272*max | | 'NN Gartley' | 1.128 - 1.618 | 0.382 - 0.886 | 0.618*min - 0.618*max | 0.786*min - 0.786*max | | 'NN A Gartley' | 1.618*min - 1.618*max | 1.128 - 2.618 | 0.618 - 0.786 | 1.272*min - 1.272*max | | 'Bat' | 1.618 - 2.618 | 0.382 - 0.886 | 0.382 - 0.5 | 0.886*min - 0.886*max | | 'Alt Bat' | 2.0 - 3.618 | 0.382 - 0.886 | 0.382*min - 0.382*max | 1.128*min - 1.128*max | | 'A Bat' | 2.0 - 2.618 | 1.128 - 2.618 | 0.382 - 0.618 | 1.128*min - 1.128*max | | 'Max Bat' | 1.272 - 2.618 | 0.382 - 0.886 | 0.382 - 0.618 | 0.886*min - 0.886*max | | 'NN Bat' | 1.618 - 2.618 | 0.382 - 0.886 | 0.382 - 0.5 | 0.886*min - 0.886*max | | 'NN Alt Bat' | 2.0 - 4.236 | 0.382 - 0.886 | 0.382*min - 0.382*max | 1.128*min - 1.128*max | | 'NN A Bat' | 2.0 - 2.618 | 1.128 - 2.618 | 0.382 - 0.618 | 1.128*min - 1.128*max | | 'NN A Alt Bat' | 2.618*min - 2.618*max | 1.128 - 2.618 | 0.236 - 0.5 | 0.886*min - 0.886*max | | 'Butterfly' | 1.618 - 2.618 | 0.382 - 0.886 | 0.786*min - 0.786*max | 1.272 - 1.618 | | 'Max Butterfly' | 1.272 - 2.618 | 0.382 - 0.886 | 0.618 - 0.886 | 1.272 - 1.618 | | 'Butterfly 113' | 1.128 - 1.618 | 0.618 - 1.0 | 0.786 - 1.0 | 1.128*min - 1.128*max | | 'A Butterfly' | 1.272*min - 1.272*max | 1.128 - 2.618 | 0.382 - 0.618 | 0.618 - 0.786 | | 'Crab' | 2.24 - 3.618 | 0.382 - 0.886 | 0.382 - 0.618 | 1.618*min - 1.618*max | | 'Deep Crab' | 2.618 - 3.618 | 0.382 - 0.886 | 0.886*min - 0.886*max | 1.618*min - 1.618*max | | 'A Crab' | 1.618 - 2.618 | 1.128 - 2.618 | 0.276 - 0.446 | 0.618*min - 0.618*max | | 'NN Crab' | 2.236 - 4.236 | 0.382 - 0.886 | 0.382 - 0.618 | 1.618*min - 1.618*max | | 'NN Deep Crab' | 2.618 - 4.236 | 0.382 - 0.886 | 0.886*min - 0.886*max | 1.618*min - 1.618*max | | 'NN A Crab' | 1.128 - 2.618 | 1.128 - 2.618 | 0.236 - 0.447 | 0.618*min - 0.618*max | | 'NN A Deep Crab' | 1.128*min - 1.128*max | 1.128 - 2.618 | 0.236 - 0.382 | 0.618*min - 0.618*max | | 'Cypher' | 1.272 - 2.00 | 1.13 - 1.414 | 0.382 - 0.618 | 0.786*min - 0.786*max | | 'New Cypher' | 1.272 - 2.00 | 1.414 - 2.14 | 0.382 - 0.618 | 0.786*min - 0.786*max | | 'Anti New Cypher' | 1.618 - 2.618 | 0.467 - 0.707 | 0.5 - 0.786 | 1.272*min - 1.272*max | | 'Shark 1' | 1.618 - 2.236 | 1.128 - 1.618 | 0.382 - 0.618 | 0.886*min - 0.886*max | | 'Shark 1 Alt' | 1.618 - 2.618 | 0.618 - 0.886 | 0.446 - 0.618 | 1.128*min - 1.128*max | | 'Shark 2' | 1.618 - 2.236 | 1.128 - 1.618 | 0.382 - 0.618 | 1.128*min - 1.128*max | | 'Shark 2 Alt' | 1.618 - 2.618 | 0.618 - 0.886 | 0.446 - 0.618 | 0.886*min - 0.886*max | | 'Leonardo' | 1.128 - 2.618 | 0.382 - 0.886 | 0.5*min - 0.5*max | 0.786*min - 0.786*max | | 'NN A Leonardo' | 2.0*min - 2.0*max | 1.128 - 2.618 | 0.382 - 0.886 | 1.272*min - 1.272*max | | 'Nen Star' | 1.272 - 2.0 | 1.414 - 2.14 | 0.382 - 0.618 | 1.272*min - 1.272*max | | 'Anti Nen Star' | 1.618 - 2.618 | 0.467 - 0.707 | 0.5 - 0.786 | 0.786*min - 0.786*max | | '3 Drives' | 1.272 - 1.618 | 0.618 - 0.786 | 1.272 - 1.618 | 1.618 - 2.618 | | 'A 3 Drives' | 0.618 - 0.786 | 1.272 - 1.618 | 0.618 - 0.786 | 0.13 - 0.886 | | '121' | 0.382 - 0.786 | 1.128 - 3.618 | 0.5 - 0.786 | 0.382 - 0.786 | | 'A 121' | 1.272 - 2.0 | 0.5 - 0.786 | 1.272 - 2.0 | 1.272 - 2.618 | | '121 BG' | 0.618 - 0.707 | 1.128 - 1.733 | 0.5 - 0.577 | 0.447 - 0.786 | | 'Black Swan' | 1.128 - 2.0 | 0.236 - 0.5 | 1.382 - 2.618 | 1.128 - 2.618 | | 'White Swan' | 0.5 - 0.886 | 2.0 - 4.237 | 0.382 - 0.786 | 0.238 - 0.886 | | 'NN White Swan' | 0.5 - 0.886 | 2.0 - 4.236 | 0.382 - 0.724 | 0.382 - 0.886 | | 'Sea Pony' | 1.618 - 2.618 | 0.382 - 0.5 | 0.128 - 3.618 | 0.618 - 3.618 | | 'Navarro 200' | 0.886 - 3.618 | 0.886 - 1.128 | 0.382 - 0.786 | 0.886 - 1.128 | | 'May-00' | 0.5 - 0.618 | 1.618 - 2.236 | 1.128 - 1.618 | 0.5 - 0.618 | | 'SNORM' | 0.9 - 1.1 | 0.9 - 1.1 | 0.9 - 1.1 | 0.618 - 1.618 | | 'COL Poruchik' | 1.0 *min - 1.0 *max | 0.382 - 2.618 | 0.128 - 3.618 | 0.618 - 3.618 | | 'Henry – David' | 0.618 - 0.886 | 0.44 - 0.618 | 0.128 - 2.0 | 0.618 - 1.618 | | 'DAVID VM 1' | 1.618 - 1.618 | 0.382*min - 0.382*max | 0.128 - 1.618 | 0.618 - 3.618 | | 'DAVID VM 2' | 1.618 - 1.618 | 0.382*min - 0.382*max | 1.618 - 3.618 | 0.618 - 7.618 | | 'Partizan' | 1.618*min - 1.618*max | 0.382*min - 0.382*max | 0.128 - 3.618 | 0.618 - 3.618 | | 'Partizan 2' | 1.618 - 2.236 | 1.128 - 1.618 | 0.128 - 3.618 | 1.618 - 3.618 | | 'Partizan 2.1' | 1.618*min - 1.618*max | 1.128*min - 1.128*max | 0.128 - 3.618 | 0.618 - 3.618 | | 'Partizan 2.2' | 2.236*min - 2.236*max | 1.128*min - 1.128*max | 0.128 - 3.618 | 0.618 - 3.618 | | 'Partizan 2.3' | 1.618*min - 1.618*max | 0.618 - 1.618 | 0.128 - 3.618 | 0.618 - 3.618 | | 'Partizan 2.4' | 2.236*min - 2.236*max | 1.618*min - 1.618*max | 0.128 - 3.618 | 0.618 - 3.618 | | 'TOTAL' | 1.272 - 3.618 | 0.382 - 2.618 | 0.276 - 0.786 | 0.618 - 1.618 | | 'TOTAL NN' | 1.272 - 4.236 | 0.382 - 2.618 | 0.236 - 0.786 | 0.618 - 1.618 | | 'TOTAL 1' | 1.272 - 2.618 | 0.382 - 0.886 | 0.382 - 0.786 | 0.786 - 0.886 | | 'TOTAL 2' | 1.618 - 3.618 | 0.382 - 0.886 | 0.382 - 0.786 | 1.128 - 1.618 | | 'TOTNN 2NN' | 1.618 - 4.236 | 0.382 - 0.886 | 0.382 - 0.786 | 1.128 - 1.618 | | 'TOTAL 3' | 1.272 - 2.618 | 1.128 - 2.618 | 0.276 - 0.618 | 0.618 - 0.886 | | 'TOTNN 3NN' | 1.272 - 2.618 | 1.128 - 2.618 | 0.236 - 0.618 | 0.618 - 0.886 | | 'TOTAL 4' | 1.618 - 2.618 | 1.128 - 2.618 | 0.382 - 0.786 | 1.128 - 1.272 | | 'BG 1' | 2.618*min - 2.618*max | 0.382*min - 0.382*max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | | 'BG 2' | 2.237*min - 2.237*max | 0.447*min - 0.447*max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | | 'BG 3' | 2.0 *min - 2.0 *max | 0.5 *min - 0.5 *max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | | 'BG 4' | 1.618*min - 1.618*max | 0.618*min - 0.618*max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | | 'BG 5' | 1.414*min - 1.414*max | 0.707*min - 0.707*max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | | 'BG 6' | 1.272*min - 1.272*max | 0.786*min - 0.786*max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | | 'BG 7' | 1.171*min - 1.171*max | 0.854*min - 0.854*max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | | 'BG 8' | 1.128*min - 1.128*max | 0.886*min - 0.886*max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | |-------------------|------------------------|------------------------|-----------------------|-----------------------| 🔶 SETTINGS 🔹 Swings Minimum Swing Length: Minimum length used for the swing detection. Maximum Swing Length: Maximum length used for the swing detection. 🔹 Patterns Toggle Pattern Block Toggle separate pattern in each Pattern Block 🔹 Tolerance Fibonacci Ratio: Adds a percentage tolerance below/above the ratio when only one ratio applies, creating two limits. Triangle Area Ratio: Filters patterns based on the ratio of the smallest triangle to the largest triangle. 🔹 Display Labels: Display Pattern Names, Arrows or nothing Patterns: Display or not Last Line: Display previous C-D line when updated 🔹 Style Colors: Pattern Lines/Names/Arrows - background color of patterns Text Size: Text Size of Pattern Names/Arrows 🔹 Calculation Calculated Bars: Allows the usage of fewer bars for performance/speed improvement
אינדיקטור Pine Script®
מאת ‎fikira‎
29
Master Pattern [LuxAlgo]The Master Pattern indicator is derived from the framework proposed by Wyckoff and automatically displays major/minor patterns and their associated expansion lines on the chart. Liquidity levels are also included and can be used as targets/stops. Note that the Liquidity levels are plotted retrospectively as they are based on pivots. 🔶 USAGE The Master Pattern indicator detects contraction phases in the markets (characterized by a lower high and higher low). The resulting average from the latest swing high/low is used as expansion line. Price breaking the contraction range upwards highlights a bullish master pattern, while a break downward highlights a bearish master pattern. During the expansion phase price can tend to be stationary around the expansion level. This phase is then often followed by the price significantly deviating from the expansion line, highlighting a markup phase. Expansion lines can also be used as support/resistance levels. 🔹 Major/Minor Patterns The script can classify patterns as major or minor patterns. Major patterns occur when price breaks both the upper and lower extremity of a contraction range, with their contraction area highlighted with a border, while minor patterns have only a single extremity broken. 🔶 SETTINGS Contraction Detection Lookback: Lookback used to detect the swing points used to detect the contraction range. Liquidity Levels: Lookback for the swing points detection used as liquidity levels. Higher values return longer term liquidity levels. Show Major Pattern: Display major patterns. Show Minor Pattern: Display minor patterns.
אינדיקטור Pine Script®
מאת ‎LuxAlgo‎
22
Three Drive Pattern Detector [LuxAlgo]The Three Drives Pattern Detector indicator focuses on detecting and displaying completed Three Drives patterns on the user chart. This harmonic pattern is characterized by successive higher highs / lower lows following specific ratios. The script uses a multi-length swing detection approach, as well as adjusting ratios to ensure flexibility and a maximum number of visible Three Drives patterns. 🔶 USAGE The bullish/bearish Three Drives pattern is commonly interpreted as a reversal pattern and is characterized by three extensions (drives) and two intermediary retracements creating consecutive higher lows (for a bullish case) or lower highs (for a bearish case). The multi-length swing detection approach taken by the indicator allows for detecting shorter-term alongside medium/longer-term patterns simultaneously, allowing to increase in the amount of detected patterns. Users can set a Minimum Swing length (for example 2) and a Maximum Swing length (for example 100) which defines the range of the swing point detection length, higher values for these settings will detect longer-term Three-Drives patterns, while a larger range will allow for the detection of a larger number of patterns. Sometimes multiple dashed lines as the last segment can be observed. This means multiple Three Drives patterns sharing multiple swing points have formed, with only the last segment being different. 🔹 Retracement/Extension Ratios The Three Drives pattern often associates the retracement/extension to Fibonacci ratios of respectively 0.618/1.272. Some sources specify a maximum retracement/extension level of 0.786/1.618, which means the retracement should be within the 0.618-0.786 range and the extension between 1.272-1.618. Since finding a pattern where the retracement/extension is precisely at the 0.618/1.272 levels, or even between 0.618-0.786/1.272-1.618 is rare, the script allows users to adjust those ratios, which ensures more flexibility. Depending on the widening/tightening of the ratios, allowing users to find more patterns (but potentially less valid) or more valid (but fewer patterns). In the example above, " Show Ratios " is set to " Ratios With Margin ", showing the ideal retracement/extension level together with the margin, while in the example below, " Show Ratios " is set to " Ratios ", which shows only a line where the price should ideally reverse. While setting the ratios wider will result in more frequent but less valid patterns, it can also create good trading opportunities. 🔹 Best Practices The indicator doesn't include Stop Loss (SL) or Take Profit (TP) levels, however, the 1.618 Fibonacci Extension level of the last leg can commonly be used as stop loss. Typical Take Profit areas include: Starting point of the pattern Each retracement level (2x) The 0.618 retracement level of the complete pattern In the above bullish examples, the price was lower than the lowest point of the pattern. The price reversed and attained all TP levels without hitting the SL level. In the above bearish example, the price went above the highest point of the pattern but did not hit the SL level, after which two TP levels were hit. Then, the price quickly went up, just missing the SL level before it came back down again, hitting the last 2 TP levels. This example shows that other Fibonacci levels an also be effective when combined with the Three Drives pattern, even in the longer term. 🔶 DETAILS 🔹 Multi Length The core of this publication is the multi-length swing detection. To ensure the maximum amount of Three Drives patterns are found, up to 99 different swing length periods can be used to detect swing points which are then tested for valid patterns. Using a wider variety of swing points also ensures that patterns visible only with specific Swing settings can be found on the same chart without the user needing to constantly adjust the Swing settings to find other patterns. The user only needs to set the desired minimum and maximum Swing Length. In this case, swing detection using swing Lengths from 3 to 100 (97 different) are computed and evaluated for patterns. Three different patterns were found on the same chart, with swing lengths 3, 4, and 6. Note: The Maximum Swing length should be equal to or higher than the Minimum Swing Length . If the maximum value is lower than the minimum, the script will automatically take the minimum value as the maximum to prevent errors. 🔹 Width Margin % Users can filter out patterns based on the duration of each extension/retracement segment. When the users want segments of the detected patterns to be of a similar duration, the width percentage should be set lower. When the focus is on detecting more patterns the width percentage can be set higher. 🔹 Retracement/Extension Settings Show Ratios , set to Ratios , show the ideal Fibonacci retracement/extension level, while Ratios With Margin (example below) show the additional margins for retracement/extension. The upper and lower limits can be visualized while hovering over the calculated ratio label. The dashed line shows an older pattern, where the last leg has been updated. 🔹 Last Known Pattern The included dashboard highlights the date of the most recently detected pattern; the text will show " None " if no pattern is found. 🔹 Calculated Bars The "Calculated Bars" setting makes use of the recently introduced calc_bars_count parameter, making it possible to effectively reduce the number of historical bars during the computation of the script, which significantly improves the loading speed of the script. Users wishing to see the most recent patterns can set this setting to 1000 for example, where only the most recent 1000 bars are used to find patterns. If every bar must be used for pattern detection, set " Calculated bars " at 0. 🔶 SETTINGS Minimum Swing Length: Minimum length used for the swing detection. Maximum Swing Length: Maximum length used for the swing detection. Retracement: Range of required ratios used for testing retracements. Extension: Range of required ratios used for testing extensions. Width Margin: Influences the symmetry of the pattern; with a higher number allowing for less symmetry. 🔹 Style Text Size: Text size of the ratio labels. Show Ratios: Show the ideal ratio, upper/lower limit of ratios, or none. 🔹 Dashboard Show Dashboard: Toggle dashboard which shows the date of the last found pattern. Location: Location of the dashboard on the chart. Size: Text size. 🔹 Calculation Calculated Bars: Allows the usage of fewer bars for performance/speed improvement.
אינדיקטור Pine Script®
מאת ‎LuxAlgo‎
13
Advanced Pattern Detector**Script Overview** **Indicator Name:** Advanced Pattern Detector **Pine Script Version:** v5 **Indicator Type:** Overlaid on the chart (overlay=true) **Main Features:** - Detection and visualization of various technical patterns. - Generation of BUY and SELL signals based on detected patterns. - Display of Fibonacci levels to identify potential support and resistance levels. - Ability to enable or disable each pattern through the indicator settings. --- **Indicator Settings** **Switches to Enable/Disable Patterns** At the top of the indicator, there are parameters that allow the user to select which patterns will be displayed on the chart: - Three Drives - Rounding Top - Rounding Bottom - ZigZag Pattern - Inverse Head and Shoulders - Fibonacci Retracement **Parameters for ZigZag** Settings are also available for the ZigZag pattern, such as the depth of peak and trough detection, allowing the user to adjust the indicator's sensitivity to price changes. --- **Pattern Detection** Each pattern is implemented with its own logic, which checks specific conditions on the current bar (candle). Below are the main patterns: 1. **Three Drives** - **Description:** This pattern consists of three consecutive price movements in one direction (up or down). It can signal the continuation of the current trend or its reversal. - **How It Works:** - **Upward Drive:** The indicator checks that the closing price of each subsequent candle is higher than the previous one for three bars. - **Downward Drive:** The indicator checks that the closing price of each subsequent candle is lower than the previous one for three bars. 2. **Rounding Top** - **Description:** A pattern representing a smooth decrease in maximum prices over several bars, which may indicate a potential downward trend reversal. - **How It Works:** - The indicator checks that the maximum prices of the last five bars are gradually decreasing, and the current bar shows a decrease in the maximum price. 3. **Rounding Bottom** - **Description:** A pattern characterized by a smooth increase in minimum prices over several bars, signaling a possible upward trend reversal. - **How It Works:** - The indicator checks that the minimum prices of the last five bars are gradually increasing, and the current bar shows an increase in the minimum price. 4. **ZigZag Pattern** - **Description:** Used to identify corrective movements on the chart. The pattern shows peak and trough points connected by lines, helping to visualize the main price movement. - **How It Works:** - The indicator uses a function to determine local maxima and minima based on the specified depth. - Detected peaks and troughs are connected by lines to create a visual zigzag structure. 5. **Inverse Head and Shoulders** - **Description:** An inverted head and shoulders formation signals a possible reversal of a downward trend to an upward one. - **How It Works:** - The indicator looks for three local minima: the left shoulder, the head (the lowest minimum), and the right shoulder. - It checks that the left and right shoulders are approximately at the same level and below the head. 6. **Fibonacci Retracement Levels** - **Description:** Automatically builds key Fibonacci levels based on the maximum and minimum prices over the last 50 bars. These levels are often used as potential support and resistance levels. - **How It Works:** - Daily, the minimum and maximum prices over the last 50 bars are calculated. - Based on these values, Fibonacci levels are drawn: 100%, 23.6%, 38.2%, 50%, 61.8%, and 0%. - Old levels are removed when a new day begins to keep the chart clean and up-to-date. --- **Generation of Buy and Sell Signals** The indicator combines the results of detected patterns to generate trading signals: - **Buy Signals (BUY):** - Rounding Bottom - Three Drives Up - Inverse Head and Shoulders - ZigZag Low - **Sell Signals (SELL):** - Rounding Top - Three Drives Down - Inverse Head and Shoulders - ZigZag High **How It Works:** - If one or more buy conditions are met, a "BUY" label is displayed below the corresponding bar on the chart. - If one or more sell conditions are met, a "SELL" label is displayed above the corresponding bar on the chart. --- **Visualization of Patterns on the Chart** Each detected pattern is visualized using various graphical elements, allowing traders to easily identify them on the chart: - **Three Drives Up:** Green upward triangle below the bar. - **Three Drives Down:** Red downward triangle above the bar. - **Rounding Top:** Orange "RT" label above the bar. - **Rounding Bottom:** Blue "RB" label below the bar. - **Inverse Head and Shoulders:** Turquoise "iH&S" label below the bar. - **ZigZag High/Low:** Purple circles at the peaks and troughs of the zigzag. --- **Displaying Fibonacci Levels** Fibonacci levels are displayed as horizontal lines on the chart with corresponding labels. These levels help traders determine potential entry and exit points, as well as support and resistance levels. --- **Drawing ZigZag Lines** ZigZag lines connect the detected peaks and troughs, visualizing corrective movements. To avoid cluttering the chart, the number of lines is limited, and old lines are automatically removed as new ones are added.
אינדיקטור Pine Script®
מאת ‎Kentuss‎
Shark Harmonic Pattern [TradingFinder] Shark Detector Indicator🔵 Introduction The Shark harmonic pattern, first introduced by Scott Carney in 2011, is a recognized tool in technical analysis. Since its inception, it has been widely adopted by traders as an essential market analysis tool. Due to its complexity, the Shark pattern can be challenging for novice traders. Therefore, we have developed the Harmonic Pattern Indicator to help analysts and traders easily identify these patterns. 🟣 Understanding the Types of Shark Pattern In technical analysis, the Shark harmonic pattern forms at the end of trends and is categorized into two types: Bullish and Bearish Shark Patterns. Bullish Shark Pattern : This pattern appears at the end of a downtrend, indicating a potential reversal to an uptrend. Traders can use this pattern to identify buy entry points. The image below illustrates the core components of the Bullish Shark Pattern. Bearish Shark Pattern : Conversely, the Bearish Shark Pattern forms at the end of an uptrend, signaling a possible reversal to a downtrend. This pattern prompts traders to shift their positions from buying to selling. The image below showcases the characteristics of the Bearish Shark Pattern. 🔵 How to Use 🟣 Trading with the Bullish Shark Pattern The Bullish Shark Pattern acts as a reversal pattern, helping traders identify the end of a downtrend and the beginning of an uptrend. It consists of five key points that indicate alternating bullish and bearish movements. Upon the complete formation of this pattern, traders can look for opportunities to enter buy trades. To manage risk effectively, it is advisable to set a stop-loss below the lowest price point within the pattern. 🟣 Trading with the Bearish Shark Pattern Similarly, the Bearish Shark Pattern functions as a reversal pattern but in the opposite direction. It helps traders identify the end of an uptrend and the onset of a downtrend. After the pattern fully forms, traders can seek sell entry opportunities. As with the bullish pattern, placing a stop-loss above the highest price point within the pattern is recommended for risk management. 🔵 Setting 🟣 Logical Setting ZigZag Pivot Period : You can adjust the period so that the harmonic patterns are adjusted according to the pivot period you want. This factor is the most important parameter in pattern recognition. Show Valid Format : If this parameter is on "On" mode, only patterns will be displayed that they have exact format and no noise can be seen in them. If "Off" is, the patterns displayed that maybe are noisy and do not exactly correspond to the original pattern. Show Formation Last Pivot Confirm : if Turned on, you can see this ability of patterns when their last pivot is formed. If this feature is off, it will see the patterns as soon as they are formed. The advantage of this option being clear is less formation of fielded patterns, and it is accompanied by the latest pattern seeing and a sharp reduction in reward to risk. Period of Formation Last Pivot : Using this parameter you can determine that the last pivot is based on Pivot period. 🟣 Genaral Setting Show : Enter "On" to display the template and "Off" to not display the template. Color : Enter the desired color to draw the pattern in this parameter. LineWidth : You can enter the number 1 or numbers higher than one to adjust the thickness of the drawing lines. This number must be an integer and increases with increasing thickness. LabelSize : You can adjust the size of the labels by using the "size.auto", "size.tiny", "size.smal", "size.normal", "size.large" or "size.huge" entries. 🟣 Alert Setting Alert : On / Off Message Frequency : This string parameter defines the announcement frequency. Choices include: "All" (activates the alert every time the function is called), "Once Per Bar" (activates the alert only on the first call within the bar), and "Once Per Bar Close" (the alert is activated only by a call at the last script execution of the real-time bar upon closing). The default setting is "Once per Bar". Show Alert Time by Time Zone : The date, hour, and minute you receive in alert messages can be based on any time zone you choose. For example, if you want New York time, you should enter "UTC-4". This input is set to the time zone "UTC" by default. 🔵 Conclusion The Shark harmonic pattern is a potent analytical tool in technical analysis that aids traders in identifying critical reversal points in financial markets. Whether in a bullish or bearish context, this pattern provides clear trend change signals, allowing traders to enter trades with greater precision and optimize their strategies. However, as with all analytical methods, it is essential to supplement the Shark pattern with additional analyses and strict risk management to avoid potential losses. Incorporating this pattern into a comprehensive trading strategy can lead to better trade outcomes and more opportunities for success
אינדיקטור Pine Script®
מאת ‎TFlab‎
Cypher Harmonic Pattern [TradingFinder] Cypher Pattern Detector🔵 Introduction The Cypher Pattern is one of the most accurate and advanced harmonic patterns, introduced by Darren Oglesbee. The Cypher pattern, utilizing Fibonacci ratios and geometric price analysis, helps traders identify price reversal points with high precision. This pattern consists of five key points (X, A, B, C, and D), each playing an important role in determining entry and exit points in the financial markets. The reversal point typically occurs in the XD region, with the Fibonacci ratio ranging between 0.768 and 0.886. This zone is referred to as the Potential Reversal Zone (PRZ), where traders anticipate price changes to occur. The Cypher harmonic pattern is popular among professional traders due to its high accuracy in identifying market trends and reversal points. The pattern appears in two forms: bullish Cypher pattern and bearish Cypher pattern. In the bullish Cypher pattern, after a price correction, the price moves upward, while in the bearish Cypher pattern, the price moves downward after a temporary increase. These patterns help traders use technical analysis to identify strong reversal points in the PRZ and execute more optimal trades. Bullish Cypher Pattern : Bearish Cypher Pattern : 🔵 How to Use The Cypher pattern is one of the most complex and precise harmonic patterns, leveraging Fibonacci ratios to help traders identify price reversals. This pattern is comprised of five key points, each playing a critical role in determining entry and exit points. The Cypher pattern appears in two main types : Bullish Cypher pattern : This pattern appears as an M shape on the chart and indicates a trend reversal to the upside after a price correction. Traders can prepare for buying after identifying this pattern in technical analysis. Bearish Cypher pattern : This pattern appears as a W shape and signals the start of a downtrend after a temporary price increase. Traders can use this pattern to enter short positions. 🟣 How to Identify the Cypher Pattern on a Chart Identifying the Cypher pattern requires precision and the use of advanced technical analysis tools. The pattern consists of four main legs, each identified using Fibonacci ratios and geometric analysis. To spot the Cypher pattern on a chart, first, identify the five key points : X, A, B, C, and D. XA leg : The initial move from point X to A. AB leg : The first correction after the XA move, where the price moves to point B. BC leg : After the correction, the price moves upwards to point C. CD leg : The final price move that reaches point D, where a price reversal is expected. In a bullish Cypher pattern, point D indicates the start of a new uptrend, while in a bearish Cypher pattern, point D signals the beginning of a downtrend. Correctly identifying these points helps traders determine the best time to enter a trade. 🟣 How to Trade Using the Cypher Pattern Once the Cypher pattern is identified on the chart, traders can use it to set entry and exit points. Point D is the key point for trade entry. In the bullish Cypher pattern, the trader can enter a long position after point D forms, while in the bearish Cypher pattern, point D serves as the ideal point for entering a short position. 🟣 Entering a Buy Trade with the Bullish Cypher Pattern In a bullish Cypher pattern, traders wait for the price to reach point D, after which they can enter a buy position. At this point, the price is expected to start rising. 🟣 Entering a Sell Trade with the Bearish Cypher Pattern In a bearish Cypher pattern, the trader enters a sell position at point D, expecting the price to move downward after reaching this point. For additional confirmation, traders can use technical indicators such as RSI or MACD. 🟣 Risk Management in Cypher Pattern Trades Risk management is one of the most critical aspects of any trade, and this holds true for trading the Cypher pattern. Traders should always use stop-loss orders to prevent larger losses in case the pattern fails. In the bullish Cypher pattern, the stop-loss is usually placed slightly below point D to exit the trade if the price continues to drop. In the bearish Cypher pattern, the stop-loss is placed above point D to limit losses if the price rises unexpectedly. 🟣 Combining the Cypher Pattern with Other Technical Tools The Cypher pattern is a powerful tool in technical analysis, but combining it with other methods such as price action and technical indicators can improve trading accuracy. 🟣 Combining with Price Action Traders can use price action to confirm the Cypher pattern. Candlestick patterns like reversal candlesticks can provide additional confirmation for price reversals at point D. 🟣 Using Technical Indicators Incorporating technical indicators such as RSI and MACD can also help traders receive stronger signals for entering trades based on the Cypher pattern. These indicators help identify overbought or oversold conditions, allowing traders to make more informed decisions. 🟣 Advantages and Disadvantages of the Cypher Pattern in Technical Analysis Advantages : High accuracy : The Cypher pattern, using Fibonacci ratios and geometric analysis, provides high precision in identifying reversal points. Applicable in various markets : This pattern can be used in a wide range of financial markets, including forex, stocks, and cryptocurrencies. Disadvantages : Rarit y: The Cypher pattern appears less frequently on charts compared to other harmonic patterns. Complexity : Accurately identifying this pattern requires significant experience, which may be challenging for novice traders. 🔵 Setting 🟣 Logical Setting ZigZag Pivot Period : You can adjust the period so that the harmonic patterns are adjusted according to the pivot period you want. This factor is the most important parameter in pattern recognition. Show Valid Forma t: If this parameter is on "On" mode, only patterns will be displayed that they have exact format and no noise can be seen in them. If "Off" is, the patterns displayed that maybe are noisy and do not exactly correspond to the original pattern. Show Formation Last Pivot Confirm : if Turned on, you can see this ability of patterns when their last pivot is formed. If this feature is off, it will see the patterns as soon as they are formed. The advantage of this option being clear is less formation of fielded patterns, and it is accompanied by the latest pattern seeing and a sharp reduction in reward to risk. Period of Formation Last Pivot : Using this parameter you can determine that the last pivot is based on Pivot period. 🟣 Genaral Setting Show : Enter "On" to display the template and "Off" to not display the template. Color : Enter the desired color to draw the pattern in this parameter. LineWidth : You can enter the number 1 or numbers higher than one to adjust the thickness of the drawing lines. This number must be an integer and increases with increasing thickness. LabelSize : You can adjust the size of the labels by using the "size.auto", "size.tiny", "size.smal", "size.normal", "size.large" or "size.huge" entries. 🟣 Alert Setting Alert : On / Off Message Frequency : This string parameter defines the announcement frequency. Choices include: "All" (activates the alert every time the function is called), "Once Per Bar" (activates the alert only on the first call within the bar), and "Once Per Bar Close" (the alert is activated only by a call at the last script execution of the real-time bar upon closing). The default setting is "Once per Bar". Show Alert Time by Time Zone : The date, hour, and minute you receive in alert messages can be based on any time zone you choose. For example, if you want New York time, you should enter "UTC-4". This input is set to the time zone "UTC" by default. 🔵 Conclusion The Cypher harmonic pattern is one of the most powerful and accurate patterns used in technical analysis. Its high precision in identifying price reversal points, particularly within the Potential Reversal Zone (PRZ), has made it a popular tool among professional traders. The PRZ, located between the Fibonacci ratios of 0.768 and 0.886 in the XD region, offers traders a clear indication of where price reversals are likely to occur. However, to use this pattern successfully, traders must employ proper risk management and combine it with supplementary tools like technical indicators and price action. By understanding how to utilize the PRZ, traders can enhance the accuracy of their trade entries and exits. Ultimately, the Cypher pattern, when used in conjunction with the PRZ, helps traders make more precise decisions in the financial markets, leading to more successful and well-informed trades.
אינדיקטור Pine Script®
מאת ‎TFlab‎
1
Tailored-Custom Hamonic Patterns█ OVERVIEW We have included by default 3 known Patterns. The Bat, the Butterfly and the Gartley. But have you ever wondered how effective other, not yet known models could be? Don't ask yourself the question anymore, it's time to find out for yourself! You have the option to customize your own Patterns with the Backtesting tool and set Retracement Ratios and Targets for your own Patterns. In addition to this, in order to determine the Trend at a glance and make Pattern detection more efficient, we have linked the calculation of Patterns to Bands of several types to choose from (Bollinger, Keltner, Donchian) that you can select from a drop-down menu in the settings and play with the Multiplier and the Adaptive Length of the Patterns to see how it affects the success rate in the Backtesting table. █ HOW DOES IT WORK? - Harmonic Patterns -Pattern Names, Colors, Style etc… Everything is customizable. -Dynamic Adaptative Length with Min/Max Length. - XAB/ABC Ratio -Min/Max XAB/ABC Configurable Ratio for each Pattern to create your own Patterns. (This is really the particular option of this Indicator, because it allows you to be able to Backtest in real time after having played at configuring your own Ratios) - Bands -Contrary to the original logic of the HeWhoMustNotBeNamed script, here when the price breaks out of the upper Bands (example, Bollinger band, Keltner Channel or Donchian Channel) , with a predetermined Minimum and Maximum Length and Multiplier, we can consider the Trend to be Bearish (and not Bullish) and similarly when the price breaks down in the lower band, we can consider the Trend to be Bullish (not Bearish) . We have also added the middle line of the Channels (which can be useful for 'Scalper' type Traders. -The Length of the Bands Filter is directly related to the Dynamic Length of the Patterns. -You can use a drop-down menu to select from the following Bands Filters : SMA, EMA, HMA, RMA, WMA, VWMA, HIGH/LOW, LINREG, MEDIAN. -Sticky and Adaptive Bands options has been included. - Projections -BD/CD Projection Ratio configurable for each Pattern. (Projections are visible as Dotted Lines which we can choose to Extend or not) - Targets -Target, PRZ and Stop Levels are set to optimal values ​​based on individual Patterns. (The PRZ Level corresponds to point D of the detected Pattern so its value should always be 0) but you can change the Targets value (defined in %) as you wish. Again here, you have the option to fully configure the Style and Extend the Lines or not. - Backtesting Table -As said previously, with the possibility of testing the Success Rate of each of the 3 Customizable Patterns, this option is part of the logic of this Indicator. - Alerts -We originally believe that this Indicator does not even need Alerts. But we still decided to include at least one Alert that you can set for when a new Pattern is detected. █ NOTES Thanks to HeWhoMustNotBeNamed for his permission to reuse some part of his zigzag scripts. Remember to only make a decision once you are sure of your analysis. Good trading sessions to everyone and don't forget, risk management remains the most important!
אינדיקטור Pine Script®
מאת ‎RickSimpson‎
19
Wick-off Check Pattern [Misu]█ This Indicator shows a wick-off check pattern. This pattern appears when a candle goes below a level (support or resistance) and closes above it OR when it goes above a level and finishes below it. This causes a wick to go through the level: a wick-off check .  This can confirm a pullback or a breakout. █ Usages: This indicator can be used to validate a resistance or support level. It can also be used to validate breaking levels. █ Parameters: Deviation: Parameter used to calculate pivots. Depth: Parameter used to calculate pivots. Wickoff Mode: Mode used to detect Wickoff check pattern. > counter pattern: only shows "pullback" wickoff check. > breakout pattern: only shows "breakout moves" wickoff check. > both: shows both. Lenght Avg Body: Lenght used to calculate the average body size. First Breakout Factor: Lenght Avg Wick Validation: This factor multiplied by the "body avg" filters out the non-significant breakout. Factor Avg Wick Validation: Lenght used to calculate the average wick size. Max Bars Wickoff: This factor multiplied by the "wick avg", filters out the non-significant wickoff signals.
אינדיקטור Pine Script®
מאת ‎Fontiramisu‎
13
Harmonic Pattern Detection [LuxAlgo]Harmonic patterns make up a major part of the many patterns traders use to make investment decisions. The following tool aims to automatically categorize which XABCD harmonic pattern is highlighted by the user and to alert when the price reaches the PRZ or D point. The tool can categorize Bat, Gartley, Butterfly, and Crab patterns. Settings XA Precision: The Gartley and Butterfly patterns require precise ratios for the XA segment, this setting allows giving some headroom for the detection of these patterns. For example, the Gartley pattern requires a ratio for the XA segment of 0.618, using an XA precision of 0.01 will allow the segment to be considered correct if above 0.608 and under 0.628. Bullish: Color of a bullish pattern Bearish: Color of a bearish pattern The X, A, B, C, D settings determine the location of the harmonic pattern vertices. The user does not need to change them from the settings, instead only requiring adjusting their location on the chart like with a regular drawing tool. Setting these vertices is required when adding the indicator to your chart. Usage Upon setting the harmonic pattern vertices, the segments, as well as each ratio and PRZ, will be displayed. A dashboard in the top right displays which harmonic pattern has been detected. Detected bearish crab pattern on BTCUSD15. Bullish butterfly pattern on MATICUSD15. It is important not to use an XA precision value that would return overlapping ranges between the Gartley/Harmonic and other patterns. Using the default value is recommended. The upper limit of the PRZ is determined as vertex D plus 38.2% of segment DX, while the lower limit is the vertex D minus 38.2% of segment DX. Various methods exist for the determination of the PRZ, this one is general but the user can use one proper to the detected harmonic pattern. Finally hovering on the label highlighting the segment ratios return the proper ratio used by each harmonic pattern for that precise segment.
אינדיקטור Pine Script®
מאת ‎LuxAlgo‎
34
Supply and Demand Based Pattern [RH]This indicator focuses on detecting RBR and DBD patterns, which signify periods of increased momentum and potential continuation or reversal of the prevailing trend. The RBR pattern consists of a rally (upward movement), followed by a base (consolidation or retracement), and then another rally. It suggests that the upward momentum may persist and provide trading opportunities. On the other hand, the DBD pattern comprises a drop (downward movement), followed by a base, and then another drop. It indicates that the downward momentum might continue, offering potential shorting opportunities. Bullish(RBR) example: Bearish(DBD) example: 1. The bullish (RBR) and bearish (DBD) patterns share the same underlying logic, only differing in their directionality. 2. For both RBR and DBD patterns, the first rise/drop can consist of one or multiple candles. However, in the case of multiple candles, all candles must exhibit a bullish nature for RBR and a bearish nature for DBD. Example: 3. It is a prerequisite for the first rise/drop to include at least one candle with a defined percentage of health, as determined by the user. 4. The base, following the first rise/drop, may comprise one or multiple candles. Example: 5. To maintain consistency, the base is not allowed to retrace beyond 80%, although this value can be adjusted by the user. 6. Similar to the first rise/drop, the second rise/drop in both RBR and DBD patterns can consist of one or multiple candles. However, all candles within this phase must demonstrate a bullish nature for RBR and a bearish nature for DBD. 7. Confirmation of the bullish (RBR) pattern occurs when a candle closes above the high of the first rise. Conversely, the bearish (DBD) pattern is confirmed when a candle closes below the low of the first drop. Example: Alerts can be set for all bullish and bearish pattern or for the first pattern in the range of similar pattern.
אינדיקטור Pine Script®
מאת ‎HasanRifat‎
22
Diamond PatternDiamond Pattern Indicator This indicator is designed to detect the Diamond Pattern, a technical formation that often signals potential trend reversals. The diamond pattern can lead to strong price movements, making it a valuable tool for traders. Features: ✅ Automatic Detection – Identifies diamond patterns on the chart. ✅ Trend Reversal Signals – Highlights potential price direction changes. ✅ Multi-Timeframe Compatibility – Works across all timeframes. ✅ User-Friendly – Simple to use with no complex settings required. How to Use: 1. Add the indicator to your chart. 2. Monitor for the formation of a Diamond Pattern. 3. Use the breakout direction to guide your trading decisions.
אינדיקטור Pine Script®
מאת ‎kilavuz_369‎
4
Alternate Bat Harmonic Pattern [TradingFinder] ALT Bat Indicator🔵 Introduction The Alternate Bat harmonic pattern is one of the most precise and practical tools in technical analysis, introduced by Scott Carney in 2003. This pattern focuses on specific Fibonacci ratios, such as 0.382 at point B and 1.13XA at point D, to identify Potential Reversal Zones (PRZ) where price is likely to reverse. The Alternative Bat pattern emerged as a result of repeated failures observed in the standard Bat pattern. Traders entering trades near the 0.886XA level of the standard Bat often encountered losses. In the Alternate Bat, point D extends beyond 0.886XA, typically reversing at 1.13XA, offering a more accurate identification of the reversal zone. A key characteristic of this pattern is its M- or W-shaped structure, where the midpoint B retraces 0.382XA or less. Additionally, the CD leg requires an extension of 2.0 to 3.618 to complete the pattern. Due to its accuracy and the predictable behavior of price near the PRZ, the Alternate Bat pattern is recognized as a powerful tool for forecasting price reversals. In the bullish Alternative Bat pattern, an M-shaped structure forms. After an initial upward movement (XA), price undergoes a short correction at point B (0.382XA) and then declines toward point D (1.13XA and an extension of 2.0 to 3.618BC), where a potential upward reversal is expected. In the bearish Alternate Bat pattern, a W-shaped structure forms. After an initial downward movement (XA), price retraces slightly at point B (0.382XA) and then rises toward point D (1.13XA and an extension of 2.0 to 3.618BC), where a potential downward reversal is anticipated. 🔵 How to Use The Alternate Bat harmonic pattern is a key tool for identifying potential reversal zones (PRZ) in the market. By leveraging the 0.382 retracement at point B and the 1.13XA extension at point D, along with symmetrical price structures, this pattern offers precise reversal opportunities in both bullish and bearish market conditions. 🟣 Bullish Alternate Bat Pattern The bullish Alternate Bat pattern forms during a downtrend, signaling a potential reversal to the upside. This pattern consists of three downward movements with two corrective waves, ultimately reaching point D, which marks the PRZ. At the PRZ, the convergence of Fibonacci levels—1.13XA and extensions ranging from 2.0 to 3.618BC—creates a strong support zone where price is likely to reverse upward. 🟣 Bearish Alternative Bat Pattern The bearish Alternate Bat pattern develops during an uptrend, indicating a potential reversal to the downside. This pattern features three upward price movements with two retracements, ending at point D, where the PRZ forms. Point D is defined by the 1.13XA extension and the 2.0 to 3.618BC projection, creating a strong resistance zone where price is expected to reverse downward. 🔵 Setting 🟣 Logical Setting ZigZag Pivot Period : You can adjust the period so that the harmonic patterns are adjusted according to the pivot period you want. This factor is the most important parameter in pattern recognition. Show Valid Format : If this parameter is on "On" mode, only patterns will be displayed that they have exact format and no noise can be seen in them. If "Off" is, the patterns displayed that maybe are noisy and do not exactly correspond to the original pattern. Show Formation Last Pivot Confirm : if Turned on, you can see this ability of patterns when their last pivot is formed. If this feature is off, it will see the patterns as soon as they are formed. The advantage of this option being clear is less formation of fielded patterns, and it is accompanied by the latest pattern seeing and a sharp reduction in reward to risk. Period of Formation Last Pivot : Using this parameter you can determine that the last pivot is based on Pivot period. 🟣 Genaral Setting Show : Enter "On" to display the template and "Off" to not display the template. Color : Enter the desired color to draw the pattern in this parameter. LineWidth : You can enter the number 1 or numbers higher than one to adjust the thickness of the drawing lines. This number must be an integer and increases with increasing thickness. LabelSize : You can adjust the size of the labels by using the "size.auto", "size.tiny", "size.smal", "size.normal", "size.large" or "size.huge" entries. 🟣 Alert Setting Alert : On / Off Message Frequency : This string parameter defines the announcement frequency. Choices include: "All" (activates the alert every time the function is called), "Once Per Bar" (activates the alert only on the first call within the bar), and "Once Per Bar Close" (the alert is activated only by a call at the last script execution of the real-time bar upon closing). The default setting is "Once per Bar". Show Alert Time by Time Zone : The date, hour, and minute you receive in alert messages can be based on any time zone you choose. For example, if you want New York time, you should enter "UTC-4". This input is set to the time zone "UTC" by default. 🔵 Conclusion The Alternate Bat harmonic pattern, with its precise Fibonacci ratios like 0.382 and 1.13XA, is a reliable tool for identifying Potential Reversal Zones (PRZ) in financial markets. By recognizing symmetrical price structures and focusing on both bullish and bearish scenarios, traders can identify optimal entry and exit points with high accuracy. The key strength of this pattern lies in its ability to define strong support and resistance zones near the PRZ, increasing the probability of price reversals. Combining the pattern with candlestick confirmations and volume analysis enhances its effectiveness. Ultimately, incorporating the Alternative Bat pattern with proper risk management and Fibonacci-based targets allows traders to enter the market confidently and capitalize on potential price reversals.
אינדיקטור Pine Script®
מאת ‎TFlab‎
2
3 Drive Harmonic Pattern [TradingFinder] Three Drive Reversal🔵 Introduction The Three Drive harmonic pattern closely resembles other price structures such as Wedge Pattern and Three Push Pattern, yet it stands out due to its precise use of Fibonacci ratios and symmetrical price movements. This pattern comprises three consecutive and symmetrical price drives, each validated by key Fibonacci ratios (1.27 and 1.618), which help identify critical Potential Reversal Zones (PRZ). Unlike the Wedge, which relies on converging trend lines and can indicate either continuation or reversal, and the Three Push, which lacks defined Fibonacci ratios and symmetry, the Three Drive pattern defines PRZ with greater accuracy, providing traders with high-probability trading opportunities. This pattern appears in both bullish and bearish trends. After the completion of the third drive (Drive 3), it signals the market's readiness to reverse direction. The PRZ in this pattern serves as a crucial zone where price is highly likely to reverse, offering a strategic point for entering or exiting trades. Professional traders utilize the Three Drive pattern and PRZ as essential tools for analyzing and capitalizing on potential market reversals. Bullish Pattern : Bearish Pattern : 🔵 How to Use The Three Drive harmonic pattern is an effective tool for identifying potential reversal points in the market. By utilizing Fibonacci extension levels (1.27 and 1.618) and focusing on the pattern’s symmetry, traders can pinpoint Potential Reversal Zones (PRZ) where the price is likely to change direction. This pattern works in both bearish and bullish scenarios, each with distinct characteristics and trading opportunities. 🟣 Bullish Three Drive Pattern The bullish Three Drive pattern develops during a downtrend, indicating a potential reversal to the upside. Similar to its bearish counterpart, this pattern features three consecutive downward price movements (drives) with retracements in between. The third drive concludes within the PRZ, which serves as a strong support zone where the price is expected to reverse upwards. The first drive begins with a downward movement, followed by a retracement to the 0.618 Fibonacci level. The second drive continues downward to reach a 1.27 or 1.618 Fibonacci extension of the retracement. Finally, the third drive aligns with the PRZ, where a confluence of Fibonacci levels creates a high-probability support zone. In the PRZ, traders look for bullish confirmation signals such as bullish candlestick patterns (e.g., bullish engulfing or pin bars) or increasing trading volume. Once confirmation is observed, the PRZ becomes an ideal entry point for a buy position. Stop-loss orders are placed slightly below the PRZ to minimize risk, while take-profit targets are set at key resistance levels or Fibonacci retracement levels. 🟣 Bearish Three Drive Pattern The bearish Three Drive pattern forms during an uptrend, signaling a potential reversal to the downside. This pattern consists of three consecutive upward price movements (drives) and intermediate retracements. Each drive aligns with Fibonacci extension levels, and the third drive ends within the PRZ, indicating a high probability of a bearish reversal. In the first drive, the price moves upward and then retraces to approximately the 0.618 Fibonacci retracement level, forming the base for the second drive. The second drive then extends upward to the 1.27 or 1.618 Fibonacci extension of the preceding retracement. This process repeats for the third drive, which reaches the PRZ, typically defined by the convergence of Fibonacci levels from previous drives. Once the PRZ is identified, traders look for confirmation signals such as bearish candlestick patterns (e.g., bearish engulfing or pin bars) or declining trading volume. If confirmation is present, the PRZ becomes an optimal zone for entering a sell position. Stop-loss levels are typically placed slightly above the PRZ to protect against pattern failure, and take-profit targets are set at key support levels or Fibonacci retracement levels of the overall structure. 🟣 Three Drive Vs Wedge Pattern Vs 3 Push pattern The Three Drive, Wedge, and Three Push patterns are all used to identify potential price reversal points, but they differ significantly in structure and application. The Three Drive pattern is based on three consecutive and symmetrical price movements, validated by precise Fibonacci ratios (1.27 and 1.618), to define Potential Reversal Zones (PRZ). In contrast, the Wedge pattern relies on converging trend lines and does not require Fibonacci ratios; it can act as either a reversal or continuation pattern. Meanwhile, the Three Push pattern shares similarities with Three Drive but lacks precise symmetry and Fibonacci-based validation. Instead of a PRZ, Three Push focuses on identifying areas of support and resistance, often signaling weakening momentum in the current trend. Among these, the Three Drive pattern is more reliable for pinpointing high-probability reversal zones due to its strict Fibonacci-based and symmetrical structure. 🔵 Setting 🟣 Logical Setting ZigZag Pivot Period : You can adjust the period so that the harmonic patterns are adjusted according to the pivot period you want. This factor is the most important parameter in pattern recognition. Show Valid Format : If this parameter is on "On" mode, only patterns will be displayed that they have exact format and no noise can be seen in them. If "Off" is, the patterns displayed that maybe are noisy and do not exactly correspond to the original pattern. Show Formation Last Pivot Confirm : if Turned on, you can see this ability of patterns when their last pivot is formed. If this feature is off, it will see the patterns as soon as they are formed. The advantage of this option being clear is less formation of fielded patterns, and it is accompanied by the latest pattern seeing and a sharp reduction in reward to risk. Period of Formation Last Pivot : Using this parameter you can determine that the last pivot is based on Pivot period. 🟣 Genaral Setting Show : Enter "On" to display the template and "Off" to not display the template. Color : Enter the desired color to draw the pattern in this parameter. LineWidth : You can enter the number 1 or numbers higher than one to adjust the thickness of the drawing lines. This number must be an integer and increases with increasing thickness. LabelSize : You can adjust the size of the labels by using the "size.auto", "size.tiny", "size.smal", "size.normal", "size.large" or "size.huge" entries. 🟣 Alert Setting Alert : On / Off Message Frequency : This string parameter defines the announcement frequency. Choices include: "All" (activates the alert every time the function is called), "Once Per Bar" (activates the alert only on the first call within the bar), and "Once Per Bar Close" (the alert is activated only by a call at the last script execution of the real-time bar upon closing). The default setting is "Once per Bar". Show Alert Time by Time Zone : The date, hour, and minute you receive in alert messages can be based on any time zone you choose. For example, if you want New York time, you should enter "UTC-4". This input is set to the time zone "UTC" by default. 🔵 Conclusion The Three Drive pattern is a highly effective harmonic tool for identifying potential reversal points in the market. By leveraging its symmetrical structure and precise Fibonacci ratios (1.27 and 1.618), this pattern provides traders with clear entry and exit signals, enhancing the accuracy of their trades. Whether in bullish or bearish scenarios, the identification of the Potential Reversal Zone (PRZ) serves as a critical aspect of this pattern, enabling traders to anticipate price movements with greater confidence. Compared to similar patterns like Wedge and Three Push, the Three Drive pattern stands out for its stringent reliance on Fibonacci levels and symmetrical price movements, making it a more robust choice for forecasting reversals. However, as with any technical analysis tool, its effectiveness increases when combined with confirmation signals, such as candlestick patterns, volume analysis, and broader market context. Mastering the Three Drive pattern requires practice and attention to detail, especially in accurately defining the PRZ and ensuring the pattern adheres to its criteria. Traders who consistently apply this pattern as part of a comprehensive trading strategy can capitalize on high-probability opportunities and improve their overall performance in the market.
אינדיקטור Pine Script®
מאת ‎TFlab‎
3
[EmreKb] Custom PatternCustom Pattern With this indicator, you can create and display as many patterns as you want on the chart. The indicator works by taking two inputs. We can start the explanation by describing these inputs. Inputs Zigzag Length: Length for zigzag legs. Patternscript Code: Patternscript code. (But what is patternscript?) Explanation Of Patternscript Patternscript (it's a completely fictional script language) is a scripting language that allows you to write your own patterns, and it operates within Pinescript). Let's take a look at the syntax of this language. { (, ) } ... This means that the Fibonacci levels drawn from the from_point to the to_point must have the target_point between the min_fib_level and max_fib_level . Let's see a few practical examples. Patternscript Code For ABCD Pattern ABCD{ ABC(0.618, 0.886) BCD(1.272, 1.618) } ABC(0.618, 0.886): Fibonacci drawn from the A to B, must have the C between the 0.618 and 0.886 BCD(1.272, 1.618): Fibonacci drawn from the B to C, must have the D between the 1.272 and 1.618 Patternscript Code For Multiple Pattern BAT{ XAB(0.382, 0.5) ABC(0.382, 0.886) BCD(1.618, 2.618) XAD(0.382, 0.886) } ABCD{ ABC(0.618, 0.886) BCD(1.272, 1.618) } Notes: You can set the pattern name as you like, this is not related to the pattern rules. There is no limit for pattern count, but remember pine limits.
אינדיקטור Pine Script®
מאת ‎EmreKb‎
1
Bat Harmonic Pattern [TradingFinder] Bat Chart Indicator🔵 Introduction The Bat Harmonic Pattern, created by Scott Carney in the 1990s, is a sophisticated tool in technical analysis, used to identify potential reversal points in price movements by leveraging Fibonacci ratios. This pattern is classified into two primary types: the Bullish Bat Pattern, which signals the end of a downtrend and the beginning of an uptrend, and the Bearish Bat Pattern, which indicates the conclusion of an uptrend and the onset of a downtrend. 🟣 Bullish Bat Pattern The Bullish Bat Pattern is designed to identify when a downtrend is likely to end and a new uptrend is about to begin. The key feature of this pattern is Point D, which typically aligns near the 88.6% Fibonacci retracement of the XA leg. This point is considered a strong buy zone. When the price reaches Point D after a significant downtrend, it often indicates a potential reversal, presenting a buying opportunity for traders anticipating the start of an upward movement. 🟣 Bearish Bat Pattern In contrast, the Bearish Bat Pattern forms when an uptrend is nearing its conclusion. Point D, which also typically aligns near the 88.6% Fibonacci retracement of the XA leg, serves as a critical point for traders. This point is regarded as a strong sell zone, signaling that the uptrend may be ending, and a downtrend could be imminent. Traders often open short positions when they identify this pattern, aiming to capitalize on the anticipated downward movement. 🔵 How to Use The Bat Pattern consists of five key points: X, A, B, C, and D, and four waves: XA, AB, BC, and CD. Fibonacci ratios play a crucial role in this pattern, helping traders pinpoint precise entry and exit points. In both the Bullish and Bearish Bat Patterns, the 88.6% retracement of the XA leg is a critical level for identifying potential reversal points. 🟣 Bullish Bat Pattern Traders typically enter buy positions after Point D forms, expecting the downtrend to end and a new uptrend to start. This point, located near the 88.6% retracement of the XA leg, serves as a reliable buy signal. 🟣 Bearish Bat Pattern Traders usually open short positions after identifying Point D, expecting the uptrend to end and a downtrend to begin. This point, also near the 88.6% retracement of the XA leg, acts as a valid sell signal. 🟣 Trading Tips for the Bat Pattern Accurate Fibonacci Point Identification : Accurately identify Points X, A, B, C, and D, and calculate the Fibonacci ratios between these points. Point D should ideally be near the 88.6% retracement of the XA leg. Signal Confirmation with Other Tools : To enhance the pattern's accuracy, avoid trading solely based on the Bat Pattern. Risk Management : Always use stop-loss orders. In a Bullish Bat Pattern, place the stop-loss below Point X, and in a Bearish Bat Pattern, above Point X. This helps limit potential losses if the pattern fails. Wait for Price Movement Confirmation : After identifying Point D, wait for the price to move in the anticipated direction to confirm the pattern's validity before entering a trade. Set Realistic Profit Targets : Use Fibonacci retracement levels to set realistic profit targets, such as 38.2%, 50%, and 61.8% retracement levels of the CD leg. This strategy helps maximize profits and prevents premature exits. 🔵 Setting 🟣 Logical Setting ZigZag Pivot Period : You can adjust the period so that the harmonic patterns are adjusted according to the pivot period you want. This factor is the most important parameter in pattern recognition. Show Valid Forma t: If this parameter is on "On" mode, only patterns will be displayed that they have exact format and no noise can be seen in them. If "Off" is, the patterns displayed that maybe are noisy and do not exactly correspond to the original pattern. Show Formation Last Pivot Confirm : if Turned on, you can see this ability of patterns when their last pivot is formed. If this feature is off, it will see the patterns as soon as they are formed. The advantage of this option being clear is less formation of fielded patterns, and it is accompanied by the latest pattern seeing and a sharp reduction in reward to risk. Period of Formation Last Pivot : Using this parameter you can determine that the last pivot is based on Pivot period. 🟣 Genaral Setting Show : Enter "On" to display the template and "Off" to not display the template. Color : Enter the desired color to draw the pattern in this parameter. LineWidth : You can enter the number 1 or numbers higher than one to adjust the thickness of the drawing lines. This number must be an integer and increases with increasing thickness. LabelSize : You can adjust the size of the labels by using the "size.auto", "size.tiny", "size.smal", "size.normal", "size.large" or "size.huge" entries. 🟣 Alert Setting Alert : On / Off Message Frequency : This string parameter defines the announcement frequency. Choices include: "All" (activates the alert every time the function is called), "Once Per Bar" (activates the alert only on the first call within the bar), and "Once Per Bar Close" (the alert is activated only by a call at the last script execution of the real-time bar upon closing). The default setting is "Once per Bar". Show Alert Time by Time Zone : The date, hour, and minute you receive in alert messages can be based on any time zone you choose. For example, if you want New York time, you should enter "UTC-4". This input is set to the time zone "UTC" by default. 🔵 Conclusion The Bat Harmonic Pattern is a powerful tool in technical analysis, offering traders the ability to identify critical reversal points using Fibonacci ratios. By recognizing the Bullish and Bearish Bat Patterns, traders can anticipate potential trend reversals and make informed trading decisions. However, it is essential to combine the Bat Pattern with other technical analysis tools and confirm signals for better trading outcomes. With proper use, this pattern can help traders minimize risk and optimize their entry and exit points in the market.
אינדיקטור Pine Script®
מאת ‎TFlab‎
Gartley Harmonic Pattern [TradingFinder] Harmonic Chart patterns🔵 Introduction Research by H.M. Gartley and Scott Carney emphasizes the importance of harmonic patterns in technical analysis for predicting market movements. Gartley's work, particularly the Gartley 222 pattern, is detailed in his book "Profits in the Stock Market" and relies on the specific placement of points X, A, B, C, and D. 🟣 Defining the Gartley Pattern The Gartley pattern is a powerful technical analysis tool often seen at the end of a trend, signaling a potential reversal. Ideally, it forms during the first and second waves of Elliott Wave theory, with wave XA representing wave 1 and the entire ABCD correction representing wave 2. While patterns outside this structure are also valid, the key points of the Gartley pattern align closely with Fibonacci retracement levels. Specifically, point B corrects wave XA to the 61.8% level, point C lies between 38% and 79% of wave AB, and point D extends between 113% and 162% of wave BC. The bullish Gartley pattern, shown below, forms at the end of a downtrend and signals a potential buying opportunity. Bullish : Bearish : 🔵 How to Use 🟣 Bullish Gartley Pattern To spot a bullish Gartley pattern, follow these rules: the move from point X to point A (the first leg) must be upward. The subsequent move from point A to point B is downward, followed by an upward move from point B to point C. Finally, the move from point C to point D is downward. On a chart, this pattern resembles the letter M. After the final leg of this pattern, prices are expected to rise from point D. 🟣 Bearish Gartley Pattern A bearish Gartley pattern forms similarly to the bullish one but in reverse. The initial move from point X to point A should be downward. The next move from point A to point B is upward, followed by a downward move from point B to point C. The final leg moves upward from point C to point D. This pattern appears as a W on charts, indicating that prices are likely to fall from point D after the final move. By understanding and identifying Gartley patterns, traders can enhance their technical analysis and improve their decision-making in financial markets. These patterns, when correctly identified, offer significant insights into potential market reversals and continuation patterns. 🔵 Setting 🟣 Logical Setting ZigZag Pivot Period : You can adjust the period so that the harmonic patterns are adjusted according to the pivot period you want. This factor is the most important parameter in pattern recognition. Show Valid Format : If this parameter is on "On" mode, only patterns will be displayed that they have exact format and no noise can be seen in them. If "Off" is, the patterns displayed that maybe are noisy and do not exactly correspond to the original pattern Show Formation Last Pivot Confirm : if Turned on, you can see this ability of patterns when their last pivot is formed. If this feature is off, it will see the patterns as soon as they are formed. The advantage of this option being clear is less formation of fielded patterns, and it is accompanied by the latest pattern seeing and a sharp reduction in reward to risk. Period of Formation Last Pivot : Using this parameter you can determine that the last pivot is based on Pivot period. 🟣 Genaral Setting Show : Enter "On" to display the template and "Off" to not display the template. Color : Enter the desired color to draw the pattern in this parameter. LineWidth : You can enter the number 1 or numbers higher than one to adjust the thickness of the drawing lines. This number must be an integer and increases with increasing thickness. LabelSize : You can adjust the size of the labels by using the "size.auto", "size.tiny", "size.smal", "size.normal", "size.large" or "size.huge" entries. 🟣 Alert Setting Alert : On / Off Message Frequency : This string parameter defines the announcement frequency. Choices include: "All" (activates the alert every time the function is called), "Once Per Bar" (activates the alert only on the first call within the bar), and "Once Per Bar Close" (the alert is activated only by a call at the last script execution of the real-time bar upon closing). The default setting is "Once per Bar". Show Alert Time by Time Zone : The date, hour, and minute you receive in alert messages can be based on any time zone you choose. For example, if you want New York time, you should enter "UTC-4". This input is set to the time zone "UTC" by default.
אינדיקטור Pine Script®
מאת ‎TFlab‎
4