Black Fridayעד 80% הנחה

חפש סקריפטים עבור "reversal"

3-Bar-Reversal-Pattern Strategy Backtest This startegy based on 3-day pattern reversal described in "Are Three-Bar Patterns Reliable For Stocks" article by Thomas Bulkowski, presented in January, 2000 issue of Stocks&Commodities magazine. That pattern conforms to the following rules: - It uses daily prices, not intraday or weekly prices; - The middle day of the three-day pattern has the lowest low of the three days, with no ties allowed; - The last day must have a close above the prior day's high, with no ties allowed; - Each day must have a nonzero trading range. Please, use it only for learning or paper trading. Do not for real trading.
אסטרטגיית Pine Script®
מאת ‎HPotter‎
4
Triple Bollinger BandsI found myself using multiple bollinger bands a lot so I decided to add them all to one script and add the ability to adjust them by 0.2. It has helped me by not taking up as much space in the upper left corner as well as improving my in's and outs of trend continuation trades. If you manage to find a double top at +2 or greater deviation, and with a bearish divergence on the RSI as shown in this picture, GO SHORT SON! This was a fast and easy 35 - 40 pips and if you used your fibonacci for an exit you had little doubt of the final result and could have even been prepared for an immediate reversal knowing you were then at an oversold -2.8 deviation. I could go on and on........
אינדיקטור Pine Script®
מאת ‎TimeFliesBuy‎
8
Outside Reversal SetUpwww.tradingview.com This is an outside reversal set up from Frank Ochoa's book Secrets of a Pivot Boss. He recommends using this in confirmation with Pivots but I guess you can play with any other indicator of your choice. PATTERN PSYCHOLOGY " The power behind this pattern lies in the psychology behind the traders involved in this setup. If you have ever participated in a breakout at support or resistance only to have the market reverse sharply against you, then you are familiar with the market dynamics of this setup . Basically, market participants are testing the waters above resistance or below support to make sure there is no new business to be done at these levels. When no initiative buyers or sellers participate in range extension, responsive participants have all the information theyneed to reverse price back toward a new area of perceived value."
אינדיקטור Pine Script®
מאת ‎cristian.d‎
9
1-2-3 Reversal Strategy This System was created from the Book "How I Tripled My Money In The Futures Market" by Ulf Jensen, Page 183. This is reverse type of strategies. The strategy buys at market, if close price is higher than the previous close during 2 days and the meaning of 9-days Stochastic Slow Oscillator is lower than 50. The strategy sells at market, if close price is lower than the previous close price during 2 days and the meaning of 9-days Stochastic Fast Oscillator is higher than 50.
אינדיקטור Pine Script®
מאת ‎HPotter‎
Reversal off EMA-XsEMA-Xs works mostly on Forex due to the small prices and price fluctuations. It does work on Gold, oddly enough, and some others like UKX 100...but mostly on forex. It doesn't work as well on JPY pairs but occasionally does; the JPY pairs give less signals, but when a JPY pair gives a signal, its a high probability setup. Another script EMA-XL works better on the higher priced instruments like S&P, DJI, OIL, BTC etc. This script will show 3 moving averages: 13, 34, 200 and works on the 5m, 1hr, 4hr, daily charts. Signals "B" or "S" will be on the chart above or below the candles respectively. When to open: The script gives buy and sell signals based on a counter-trend move away from the MA's. When the price rises a specific percent above/below the EMA, it'll give a signal. It's best to take a trade when it gives a cluster of consecutive signals near the same price. If using on the 5m, definitely wait for consecutive signals. Also, use this in conjunction with support and resistance areas. Using with fibs for confirmation really makes this a good tool with high probability: IE, when price hits a fib and the script gives a signal, its a high probability setup. When to close: 1. After a fast move up/down you may use this to counter trade a scalp 10+ pips, but you need to be quick; applies mostly to the 5m chart. 2. If you have the tenacity wait until you see an opposite signal. With this method you may be holding a loosing trade for a while. But what I've noticed is if it trends against you, price usually with come near to the first time it signaled. You may want to stack trades on each cluster of signals. IE first trade is 1000 units, next is 2000 units, etc... then close when prices comes near the first time it signaled. By this time, if you held, you should have profit. This strategy will really test your mental resilience. 3. Wait until it comes back to one of the trendlines; remember this is a counter trend signal so price is moving away from the MA and it always returns to touch one of the MA's...LOL eventually 4. Applying to scalping on the 5m, keep the stops tight because if the instrument trends hard and fast, you'll be upside-down quickly. If you put a lot of time into using this signal generator, you can really make good profit. But with all tools, you need to master it. There are nuances to the simple logic of this script that can be both fun and frustrating. With all endeavors, if you put the time into it, you will reap the rewards. Good luck and let me know if you have any questions/comments.
אינדיקטור Pine Script®
מאת ‎shamgar331‎
DarkPool's Squeeze Momentum @author LazyBearDarkPool's Squeeze Momentum Pro is a comprehensive overhaul of the classic volatility indicator, designed for the modern trader who requires deeper market insight. While staying true to the core logic of the original TTM Squeeze, this version introduces advanced features like automatic divergence detection, dynamic moving average selection, and main-chart integration to help you time entries and exits with precision. Credit: This script is built upon the foundational "Squeeze Momentum Indicator" originally developed by LazyBear. This version expands on that legacy with enhanced visualization, alert systems, and divergence logic. Key Features 1. Advanced Divergence Detection The indicator automatically scans for Regular Bullish and Regular Bearish divergences between price action and momentum. Bullish Divergence (Green "BULL" Label): Occurs when Price makes a Lower Low, but Momentum makes a Higher Low. This often precedes a bullish reversal. Bearish Divergence (Red "BEAR" Label): Occurs when Price makes a Higher High, but Momentum makes a Lower High. This often precedes a bearish reversal. 2. Multi-Mode Squeeze Detection The central dots on the zero line tell you the state of market volatility: Red Dot (Squeeze ON): Volatility is compressed. The Bollinger Bands are inside the Keltner Channels. The market is "coiling" and preparing for an explosive move. Do not trade yet—wait for the fire. Grey Dot (Squeeze OFF): The squeeze has "fired." Volatility is expanding, and price is moving. Blue Dot (Wide Bands): Volatility is extremely high. The bands are exceptionally wide, often indicating the end of a trend or a period of high risk. 3. "Ghost" Histogram & Visual Depth The momentum histogram features a "Ghost" fill (transparent background) to help visualize the volume of momentum without cluttering the screen. Bright Green: Strong Bullish Momentum (Rising). Dark Green: Weakening Bullish Momentum (Fading). Bright Red: Strong Bearish Momentum (Falling). Dark Red: Weakening Bearish Momentum (Recovering). 4. Dynamic Candle Coloring Enabled by default, this feature colors the candles on your main chart to match the momentum histogram. This allows you to instantly gauge the trend strength without looking down at the oscillator pane. 5. Adaptive Calculation Engines Unlike standard versions fixed to SMA, you can now select the moving average algorithm that drives the Bollinger Bands and Keltner Channels: SMA: Standard, stable signals. EMA: More reactive to recent price action. WMA/RMA: Weighted options for specific strategies. 🛠 How to Operate The "Squeeze & Fire" Strategy Identify the Squeeze: Look for a series of Red Dots on the zero line. This indicates the market is resting and building energy. The Trigger: Wait for the dot to turn Gray AND for the histogram to expand clearly in one direction. Long Signal: Squeeze fires (Red -> Gray) + Histogram turns Green. Short Signal: Squeeze fires (Red -> Gray) + Histogram turns Red. The "Divergence Reversal" Strategy Watch for "BULL" or "BEAR" labels appearing near the peaks or valleys of the histogram. Confirmation: A divergence is a warning. Wait for the histogram color to change (e.g., from Bright Red to Dark Red) before entering a reversal trade. ⚙️ Settings Guide Basis MA Type: Choose between SMA, EMA, WMA, or RMA to tune the sensitivity of the squeeze. BB/KC Settings: Fully customizable Length and Multipliers to adapt to different assets (Crypto, Forex, or Stocks). Pivot Lookback: Controls how strict the divergence detection is. Higher numbers = fewer, more significant signals. Colour Main Chart Candles: Toggle this OFF if you prefer your standard candle colours. Disclaimer Trading involves a high level of risk and is not suitable for all investors. This indicator is a tool for technical analysis and does not constitute financial advice. Past performance is not indicative of future results. Always use proper risk management and do not trade based solely on a single indicator.
אינדיקטור Pine Script®
מאת ‎DarkPoolCrypto‎
MTC – Multi-Timeframe Trend Confirmator V2MTC – Multi-Timeframe Trend Confirmator V2 A comprehensive trend analysis indicator that systematically combines six technical indicators across three customizable timeframes, using a weighted scoring system to identify high-probability trend conditions. ORIGINALITY AND CONCEPT This indicator is original in its approach to multi-timeframe trend confirmation. Rather than relying on a single indicator or timeframe, it creates a composite score by evaluating six different technical conditions simultaneously across three timeframes. The scoring system weighs certain indicators more heavily based on their reliability in trend identification. The visual gauge provides an at-a-glance view of trend alignment across timeframes, making it easier to identify when multiple timeframes agree - a condition that typically produces stronger, more reliable trends. HOW IT WORKS - DETAILED SCORING METHODOLOGY The indicator evaluates six technical conditions on each timeframe. Each condition contributes to a composite score: EMA 200 (Weight: 1 point) Bullish: Price closes above EMA 200 (+1) Bearish: Price closes below EMA 200 (-1) Rationale: Long-term trend direction SMA 50/200 Crossover (Weight: 1 point) Bullish: SMA 50 above SMA 200 (+1) Bearish: SMA 50 below SMA 200 (-1) Rationale: Golden/Death cross confirmation RSI 14 (Weight: 1 point) Bullish: RSI above 55 (+1) Bearish: RSI below 45 (-1) Neutral: RSI between 45-55 (0) Rationale: Momentum filter with buffer zone to avoid chop MACD (12,26,9) (Weight: 1 point) Bullish: MACD line above signal line (+1) Bearish: MACD line below signal line (-1) Rationale: Trend momentum confirmation ADX 14 (Weight: 2 points - DOUBLE WEIGHTED) Requires ADX above 25 to activate Bullish: DI+ above DI- and ADX > 25 (+2) Bearish: DI- above DI+ and ADX > 25 (-2) Neutral: ADX below 25 (0) Rationale: Trend strength filter - only counts when a strong trend exists. Double weighted because ADX is specifically designed to measure trend strength, making it more reliable than oscillators. Supertrend (Factor: 3.0, ATR Period: 10) (Weight: 2 points - DOUBLE WEIGHTED) Bullish: Direction indicator = -1 (+2) Bearish: Direction indicator = +1 (-2) Rationale: Dynamic support/resistance that adapts to volatility. Double weighted because Supertrend provides clear, objective trend signals with built-in stop-loss levels. COMPOSITE SCORE CALCULATION: Total possible score range: -10 to +10 points Score interpretation: Score > 2: UPTREND (majority of indicators bullish, especially weighted ones) Score < -2: DOWNTREND (majority of indicators bearish, especially weighted ones) Score between -2 and +2: NEUTRAL/RANGING (mixed signals or weak trend) The threshold of +/- 2 was chosen because it requires more than just basic agreement - it typically means at least 3-4 indicators align, or that the heavily-weighted indicators (ADX, Supertrend) confirm the direction. MULTI-TIMEFRAME LOGIC: The indicator calculates the composite score independently for three timeframes: Higher Timeframe (default: 4H) - Major trend direction Mid Timeframe (default: 1H) - Intermediate trend Lower Timeframe (default: 15min) - Entry timing Main Trend Confirmation Rule: The indicator only signals a confirmed trend when BOTH the higher timeframe AND mid timeframe scores agree (both > 2 for uptrend, or both < -2 for downtrend). This dual-timeframe confirmation significantly reduces false signals during choppy or ranging markets. HOW TO USE IT Setup: Add indicator to chart Customize timeframes based on your trading style: Scalpers: 15min, 5min, 1min Day traders: 4H, 1H, 15min (default) Swing traders: Daily, 4H, 1H Toggle individual indicators on/off based on your preference Adjust Supertrend parameters if needed for your instrument's volatility Reading the Gauge (Top Right Corner): Each row shows one timeframe Left column: Timeframe label Middle column: Visual strength bars (10 bars = maximum score) Green bars = Bullish score Red bars = Bearish score Yellow bars = Neutral/ranging More filled bars = stronger trend Right column: Numerical score Trading Signals: Entry Signals: Long Entry: Wait for upward triangle arrow (appears when higher + mid TF both bullish) Confirm gauge shows green bars on higher and mid timeframes Lower timeframe should ideally turn green for entry timing Chart background tints light green Short Entry: Wait for downward triangle arrow (appears when higher + mid TF both bearish) Confirm gauge shows red bars on higher and mid timeframes Lower timeframe should ideally turn red for entry timing Chart background tints light red Position Management: Stay in position while higher and mid timeframes remain aligned Consider reducing position size when mid timeframe score weakens Exit when higher timeframe trend reverses (daily label changes) Avoiding False Signals: Ignore signals when gauge shows mixed colors across timeframes Avoid trading when scores are close to threshold (+/- 2 to +/- 4 range) Best trades occur when all three timeframes align (all green or all red in gauge) Use the numerical scores: higher absolute values (7-10) indicate stronger, more reliable trends Practical Examples: Example 1 - Strong Uptrend Entry: Higher TF: +8 (strong green bars) Mid TF: +6 (strong green bars) Lower TF: +4 (moderate green bars) Action: Look for long entries on lower timeframe pullbacks Background is tinted green, upward arrow appears Example 2 - Ranging Market (Avoid): Higher TF: +3 (weak green) Mid TF: -1 (weak red) Lower TF: +2 (neutral yellow) Action: Stay out, wait for alignment Example 3 - Trend Reversal Warning: Higher TF: +7 (still green) Mid TF: -3 (turned red) Lower TF: -5 (strong red) Action: Consider exiting longs, prepare for potential higher TF reversal Customization Options: Timeframes: Adjust all three to match your trading horizon Indicator Toggles: Disable indicators that don't suit your instrument: Disable RSI for highly volatile crypto markets Disable SMA crossover for range-bound instruments Keep ADX and Supertrend enabled for trending markets Visual Preferences: Arrow size: 5 options from Tiny to Huge Gauge size: Small/Medium/Large for different screen sizes Toggle arrows on/off if you only want the gauge Alert Setup: Right-click chart, "Add Alert" Condition: MTC v6 - UPTREND or DOWNTREND Get notified when multi-timeframe confirmation occurs Best Practices: Use with Price Action: The indicator works best when combined with support/resistance levels, chart patterns, and volume analysis Risk Management: Even with multi-timeframe confirmation, always use stop losses Market Context: Works best in trending markets; less reliable in strong consolidation Backtesting: Test the default settings on your specific instrument and timeframe before live trading Patience: Wait for full multi-timeframe alignment rather than taking premature signals Technical Notes: All calculations use Pine Script's security function to fetch data from multiple timeframes Prevents repainting by using confirmed bar data Gauge updates in real-time on the last bar Daily labels mark at the open of each new daily candle Works on all instruments and timeframes This indicator is ideal for traders who want objective, systematic trend identification without the complexity of analyzing multiple indicators manually across different timeframes. -NATANTIA
אינדיקטור Pine Script®
מאת ‎Natantia‎
Student Wyckoff Target Shooter **Target Shooter — Equal Move Target Tool (Larry Williams idea)** **1. What this indicator does** Target Shooter is a tool that measures the last meaningful price swing and projects an **equal move target** in the direction of the breakout. The logic is simple: * The market makes a move from point A to point B (a swing high to a swing low, or vice versa). * Then price breaks out above or below this swing range. * Target Shooter takes the size of that swing and **adds it in the direction of the breakout**, showing a logical **price target zone** where the move may: * slow down, * react, * or potentially reverse. This is a practical implementation of the “Equal Moves” idea often referenced by Larry Williams. --- **2. Core idea (example)** Example from the classic explanation: * Price drops from **80 down to 20** → the move is **60 points**. * The swing range is now: **High = 80, Low = 20**. * Later, price **breaks above 80**. Target Shooter assumes: > “If the market could move 60 points in one direction, after a breakout it may travel another 60 points in the opposite direction.” So the upside target becomes: * Move size: 80 − 20 = 60 * Breakout above 80 * **Target = 80 + 60 = 140** The indicator finds such swings automatically and draws: * **UT (Upper Target)** on upside breakouts * **DT (Down Target)** on downside breakouts --- **3. What you see on the chart** 1. **Target lines** * When price breaks **above** a previous swing range, the indicator plots a horizontal **UT (Upper Target)** line — the projected equal move target. * When price breaks **below** the previous swing range, it plots a **DT (Down Target)** line — the downside target. * Each line is drawn from the breakout bar and extended to the right for a user-defined number of bars. 2. **Price labels** * A small label “UT” or “DT” is shown at the end of the line with the exact target price. * This makes it easy to see where the projected target is without checking the scale. 3. **Optional swing range (debug view)** * There is an option to display the **swing range** that the target is based on (similar to a Donchian channel on previous bars). * This shows the upper (swing high) and lower (swing low) boundaries the indicator used to define the last move. --- **4. Key inputs (plain language)** * **Swing window length (bars)** How many bars back the indicator looks to find the last meaningful swing (highest high and lowest low). This is like the length of a Donchian channel used to define the previous range. Smaller values → more frequent, shorter targets. Larger values → bigger swings and more distant targets. * **Minimum move size (in ticks)** This is a noise filter. If the distance between the swing high and swing low is smaller than this threshold, no targets are drawn. The indicator will only react to moves that are big enough to matter for your trading. * **Breakout type: Close vs High/Low** * **Breakout by Close**: The target appears only when the **bar closes** above/below the swing range. More conservative and fewer false signals. * **Breakout by High/Low**: The target appears as soon as the **high** or **low** of the bar breaks the swing range. Faster and more aggressive, but more sensitive to noise. * **Target line length (bars)** How far to the right the UT/DT lines should be extended. Shorter length → local target zones. Longer length → important levels visible far into the future. * **Appearance settings** * Separate color, width and style for **UT** and **DT** lines. * Option to show or hide labels with price and “UT/DT” text. --- **5. How to use Target Shooter in trading** > Important: this is **not** an entry signal indicator. > Target Shooter is a **targeting and context tool**, not a standalone system. Typical uses: 1. **Planning take-profit zones** * You already have an entry signal from your own strategy (Wyckoff, Larry Williams patterns, levels, volume, whatever you use). * Target Shooter shows a **logical equal move target** where the current wave can reasonably “shoot”. * You can: * place your main take-profit around the target, * scale out part of the position, * tighten stops when price approaches the target. 2. **Finding potential reaction / reversal areas** * Equal move targets often act as **zones of interest**. * If price reaches a UT/DT level and then shows weakness/absorption/volume spikes or reversal candles, this might be a good place to take profits or look for counter-trend opportunities (for experienced traders). 3. **Assessing trend strength** * If price **easily exceeds** the equal move target and keeps going without any reaction, it suggests a very strong trend. * If price **fails to reach** the target and reverses early, the move is weaker than expected. --- **6. Timeframes** Target Shooter can be used on: * **Intraday** (M5, M15, M30, H1) — for shorter-term targets within the day, * **Higher timeframes** (H4, D1 and above) — for swing and position trades. General rule: The **higher the timeframe and the larger the swing**, the **more important** the target level tends to be. --- **7. Notes and limitations** * The indicator does **not** predict the future. It simply projects a geometric equal move from the last swing. * It should be combined with your own trading framework: * support/resistance, * Wyckoff / VSA, * trend tools, * volume/flow, etc. * Always keep proper risk management. A target is a **scenario**, not a guarantee. .
אינדיקטור Pine Script®
מאת ‎StudentWyckoff‎
2
RCV Essentials════════════════════════════════════════════ RCV ESSENTIALS - MULTI-TIMEFRAME & SESSION ANALYSIS TOOL ════════════════════════════════════════════ 📊 WHAT THIS INDICATOR DOES This professional-grade indicator combines two powerful analysis modules: 1. TRADING SESSION TRACKER - Visualizes high/low ranges for major global market sessions (NY Open, London Open, Asian Session, etc.) 2. MULTI-TIMEFRAME CANDLE DISPLAY - Shows up to 8 higher timeframes simultaneously on your chart (15m, 30m, 1H, 4H, 1D, 1W, 1M, 3M) ════════════════════════════════════════════ 🎯 KEY FEATURES ════════════════════════════════════════════ TRADING SESSIONS MODULE: ✓ Track up to 6 custom trading sessions simultaneously ✓ Real-time high/low range detection during active sessions ✓ Pre-configured for NYO (7-9am), LNO (2-3am), Asian Session (4:30pm-12am) ✓ 60+ global timezone options ✓ Customizable colors, labels, and transparency ✓ Daily divider lines (optional Sunday skip for traditional markets) ✓ Only displays on ≤30m timeframes for optimal clarity MULTI-TIMEFRAME CANDLES MODULE: ✓ Display 1-8 higher timeframes with up to 10 candles each ✓ Real-time candle updates (non-repainting) ✓ Fully customizable colors (separate bullish/bearish for body/border/wick) ✓ Adjustable candle width, spacing, and positioning ✓ Smart label system (top/bottom/both, aligned or follow candles) ✓ Automatic timeframe validation (only shows TFs higher than chart) ✓ Memory-optimized with automatic cleanup ════════════════════════════════════════════ 🔧 HOW IT WORKS ════════════════════════════════════════════ TECHNICAL IMPLEMENTATION: Session Tracking Algorithm: • Detects session start/end using time() function with timezone support • Continuously monitors and updates high/low during active session • Finalizes range when session ends using var persistence • Draws boxes using real-time bar_index positioning • Maintains session ranges across multiple days for reference Multi-Timeframe System: • Uses ta.change(time()) detection to identify new MTF candle formation • Constructs candles using custom Type definitions (Candle, CandleSet, Config) • Stores OHLC data in arrays with automatic size management • Renders using box objects (bodies) and line objects (wicks) • Updates current candle every tick; historical candles remain static • Calculates dynamic positioning based on user settings (offset, spacing, width) Object-Oriented Architecture: • Custom Type "Candle" - Stores OHLC values, timestamps, visual elements • Custom Type "CandleSet" - Manages arrays of candles + settings per timeframe • Custom Type "Config" - Centralizes all display configuration • Efficient memory management via unshift() for new candles, pop() for old Performance Optimizations: • var declarations minimize recalculation overhead • Conditional execution (sessions only on short timeframes) • Maximum display limits prevent excessive object creation • Timeframe validation at barstate.isfirst reduces redundant checks ════════════════════════════════════════════ 📈 HOW TO USE ════════════════════════════════════════════ SETUP: 1. Add indicator to chart (works best on 1m-30m timeframes) 2. Open Settings → "Trading Sessions" group - Enable desired sessions (NYO, LNO, AS, or custom) - Select your timezone from 60+ options - Adjust colors and transparency 3. Open Settings → "Multi-TF Candles" group - Enable timeframes (TF1-TF8) - Configure each timeframe and display count - Customize colors and layout READING THE CHART: • Session boxes show high/low ranges during active sessions • MTF candles display to the right of current price • Labels identify each timeframe (15m, 1H, 4H, etc.) • Real-time updates on the most recent MTF candle TRADING APPLICATIONS: Session Breakout Strategy: → Identify session high/low (e.g., Asian session 16:30-00:00) → Wait for break above/below range → Confirm with higher timeframe candle close → Enter in breakout direction, stop at opposite side of range Multi-Timeframe Confirmation: → Spot setup on primary chart (e.g., 5m) → Verify 15m, 1H, 4H candles align with trade direction → Only take trades where higher TFs confirm → Exit when higher TF candles show reversal Combined Session + MTF: → Asian session establishes range overnight → London Open breaks Asian high → Confirm with bullish 15m + 1H candles → Enter long with stop below Asian high ════════════════════════════════════════════ 🎨 ORIGINALITY & INNOVATION ════════════════════════════════════════════ What makes this indicator original: 1. INTEGRATED DUAL-MODULE DESIGN Unlike separate session or MTF indicators, this combines both in a single performance-optimized script, enabling powerful correlation analysis between session behavior and timeframe structure. 2. ADVANCED RENDERING SYSTEM Uses custom Pine Script v5 Types with dynamic box/line object management instead of basic plot functions. This enables: • Precise visual control over positioning and spacing • Real-time updates without repainting • Efficient memory handling via automatic cleanup • Support for 8 simultaneous timeframes with independent settings 3. INTELLIGENT SESSION TRACKING The algorithm continuously recalculates ranges bar-by-bar during active sessions, then preserves the final range. This differs from static zone indicators that simply draw fixed boxes at predefined levels. 4. MODULAR ARCHITECTURE Custom Type definitions (Candle, CandleSet, Config) create extensible, maintainable code structure while supporting complex multi-timeframe operations with minimal performance impact. 5. PROFESSIONAL FLEXIBILITY Extensive customization: 6 configurable sessions, 8 timeframe slots, 60+ timezones, granular color/sizing/spacing controls, multiple label positioning modes—adaptable to any market or trading style. 6. SMART VISUAL DESIGN Automatic timeframe validation, dynamic label alignment options, and intelligent spacing calculations ensure clarity even with multiple timeframes displayed simultaneously. ════════════════════════════════════════════ ⚙️ CONFIGURATION OPTIONS ════════════════════════════════════════════ TRADING SESSIONS: • Session 1-6: On/Off toggles • Time Ranges: Custom start-end times • Labels: Custom text for each session • Colors: Individual color per session • Timezone: 60+ options (Americas, Europe, Asia, Pacific, Africa) • Range Transparency: 0-100% • Outline: Optional border • Label Display: Show/hide session names • Daily Divider: Dotted lines at day changes • Skip Sunday: For traditional markets vs 24/7 crypto MULTI-TF CANDLES: • Timeframes 1-8: Enable/disable individually • Timeframe Selection: Any TF (seconds to months) • Display Count: 1-10 candles per timeframe • Bullish Colors: Body/Border/Wick (independent) • Bearish Colors: Body/Border/Wick (independent) • Candle Width: 1-10+ bars • Right Margin: 0-200+ bars from edge • TF Spacing: Gap between timeframe groups • Label Color: Any color • Label Size: Tiny/Small/Normal/Large/Huge • Label Position: Top/Bottom/Both • Label Alignment: Follow Candles or Align ════════════════════════════════════════════ 📋 TECHNICAL SPECIFICATIONS ════════════════════════════════════════════ • Pine Script Version: v5 • Chart Overlay: True • Max Boxes: 500 • Max Lines: 500 • Max Labels: 500 • Max Bars Back: 5000 • Update Frequency: Real-time (every tick) • Timeframe Compatibility: Chart TF must be lower than selected MTFs • Session Display: Activates only on ≤30 minute timeframes • Memory Management: Automatic cleanup via array operations
אינדיקטור Pine Script®
מאת ‎RCVisionaries‎
SIDD Table Volume multiframe (Modified)🚀 SIDD Volume Table – The Most Powerful Multi-Timeframe Volume Dashboard Designed by Siddhartha Mukherjee (SIDD) Free for the community. Get an unfair edge with the cleanest, fastest, and most accurate multi-timeframe volume analyzer available on TradingView. This tool reveals where buyers and sellers are truly active across multiple timeframes—helping you confirm trends, avoid traps, and enter with confidence. 🔥 Why Traders Love This Indicator ✅ 1. Multi-Timeframe Volume Domination Instantly view Buy% / Sell% / Total Volume for: 1m • 5m • 15m • 1H • 4H • 1D • 1W Choose any combination you want! ✅ 2. Advanced Buy/Sell Volume Logic Not simple volume… This tool breaks it into: Buy Volume% (green dominance) Sell Volume% (red dominance) Using candle structure (H-L-C), giving far more accurate pressure detection. ✅ 3. Realtime Candle Countdown Never guess when a candle will close again. Get: Seconds (1m) MM:SS (5m/15m/1H) DD:HH:MM:SS (4H, 1D, 1W) Perfect for scalpers, swing traders, and index traders. ✅ 4. Beautiful & Customizable Dashboard Choose position anywhere on screen Auto size or choose Tiny → Huge Color-coded Bias (Green Buyers, Red Sellers) Clean layout built for modern charts Your chart stays clean while your data stays powerful. 💡 What This Helps You Identify Where buyers are gaining strength Where sellers are dominating Multi-timeframe alignment (the key to big moves) Real reversal pressure Volume divergence across timeframes Trend confirmation before breakouts Perfect for: NIFTY / BANKNIFTY / Stocks / Crypto / FX / Commodities 🧠 Who Should Use This? Intraday traders Swing traders Options traders Futures traders Crypto scalpers Professional volume analysts If volume matters to you → this indicator becomes a must-have. 🛠 Built with Precision Non-repainting Multi-TF aligned Fast + lightweight arrays Uses BTC/ETH feed to stabilize ticks Zero chart clutter ❤️ Free for Everyone This tool is released 100% free to help the community trade with clarity and confidence. Leave a like ⭐, comment 💬, or follow if you want more such institutional-grade tools. ⚠️ Disclaimer This is for educational/analytical use only. Not financial advice. Trade at your own risk.
אינדיקטור Pine Script®
מאת ‎bullsbearsclub‎
Smart MACD Divergence ScannerOriginal Base Indicator: "CM_MacD_Ult_MTF" by ChrisMoody This indicator builds upon ChrisMoody's excellent multi-timeframe MACD foundation and transforms it into a professional divergence scanner with advanced quality assessment and filtering capabilities. The original MACD visualization and MTF functionality have been preserved while adding completely new divergence detection, scoring, and filtering systems. 🎯 What Makes This Indicator Unique: Smart MACD Divergence Scanner is a professional tool for detecting MACD-based divergences with an advanced filtering system and signal quality assessment. Unlike standard divergence indicators, this version includes innovative features: Adaptive Quality Scoring System — each signal receives a score from 0 to 100 based on multiple factors Volatility Filter — automatic signal suppression during low market volatility periods Multi-Timeframe Confirmation — divergence verification on higher timeframe for increased reliability Divergence Strength Analysis — calculation of percentage difference between price and indicator movement Information Dashboard — detailed real-time signal statistics Cooldown System — prevention of multiple consecutive signals 💡 How It Works: The indicator uses the classic divergence concept — the divergence between price movement and the MACD oscillator. However, instead of simple pivot detection, the algorithm: Scans the market for local extremes (pivots) on price and MACD histogram Searches for divergences — when price updates low/high while MACD shows opposite movement Assesses quality — analyzes divergence strength, volatility, higher timeframe confirmation Filters noise — eliminates weak signals through threshold system and cooldown Generates signal — only when all quality criteria are met 🔧 Key Parameters: MACD Settings: Fast Length (12), Slow Length (26), Signal Length (9) Divergence Detection: Pivot Lookback (5), Max Lookback Range (60), Min Divergence Strength (15%) Quality Filters: Min Quality Score (60), Volatility Filter, MTF Confirmation, Signal Cooldown (5) 📊 How to Use: Add indicator to chart — it will automatically start scanning Configure filters — start with default settings, then adapt to your trading style Watch for signals: 🟢 Green "BUY" label = bullish divergence, 🔴 Red "SELL" label = bearish divergence Check quality score on labels (Q: XX) Use information panel to monitor statistics and current market conditions ⚙️ Settings Guide: For swing trading (4H-Daily): Increase Pivot Lookback to 7-10, set Min Quality Score to 70+ For day trading (15m-1H): Keep default settings, enable all filters For scalping (1m-5m): Decrease Min Quality Score to 50, disable MTF Confirmation For volatile markets (crypto): Increase Min Divergence Strength to 20-25%, enable Volatility Filter ⚠️ Important Notes: Divergences are probabilistic signals, not guaranteed reversals Use additional confirmation (support/resistance levels, volume, price action) Adjust parameters for specific asset and timeframe Signals appear with Pivot Lookback bars delay (retrospective confirmation) On volatile markets, increase Min Quality Score to reduce false signals
אינדיקטור Pine Script®
מאת ‎Smart-Day-Trader‎
Third eye • StrategyThird eye • Strategy – User Guide 1. Idea & Concept Third eye • Strategy combines three things into one system: Ichimoku Cloud – to define market regime and support/resistance. Moving Average (trend filter) – to trade only in the dominant direction. CCI (Commodity Channel Index) – to generate precise entry signals on momentum breakouts. The script is a strategy, not an indicator: it can backtest entries, exits, SL, TP and BreakEven logic automatically. 2. Indicators Used 2.1 Ichimoku Standard Ichimoku settings (by default 9/26/52/26) are used: Conversion Line (Tenkan-sen) Base Line (Kijun-sen) Leading Span A & B (Kumo Cloud) Lagging Span is calculated but hidden from the chart (for visual simplicity). From the cloud we derive: kumoTop – top of the cloud under current price. kumoBottom – bottom of the cloud under current price. Flags: is_above_kumo – price above the cloud. is_below_kumo – price below the cloud. is_in_kumo – price inside the cloud. These conditions are used as trend / regime filters and for stop-loss & trailing stops. 2.2 Moving Average You can optionally display and use a trend MA: Types: SMA, EMA, DEMA, WMA Length: configurable (default 200) Source: default close Filter idea: If MA Direction Filter is ON: When Close > MA → strategy allows only Long signals. When Close < MA → strategy allows only Short signals. The MA is plotted on the chart (if enabled). 2.3 CCI & Panel The CCI (Commodity Channel Index) is used for entry timing: CCI length and source are configurable (default length 20, source hlc3). Two thresholds: CCI Upper Threshold (Long) – default +100 CCI Lower Threshold (Short) – default –100 Signals: Long signal: CCI crosses up through the upper threshold cci_val < upper_threshold and cci_val > upper_threshold Short signal: CCI crosses down through the lower threshold cci_val > lower_threshold and cci_val < lower_threshold There is a panel (table) in the bottom-right corner: Shows current CCI value. Shows filter status as colored dots: Green = filter enabled and passed. Red = filter enabled and blocking trades. Gray = filter is disabled. Filters shown in the panel: Ichimoku Cloud filter (Long/Short) Ichimoku Lines filter (Conversion/Base vs Cloud) MA Direction filter 3. Filters & Trade Direction All filters can be turned ON/OFF independently. 3.1 Ichimoku Cloud Filter Purpose: trade only when price is clearly above or below the Kumo. Long Cloud Filter (Use Ichimoku Cloud Filter) – when enabled: Long trades only if close > cloud top. Short Cloud Filter – when enabled: Short trades only if close < cloud bottom. If the cloud filter is disabled, this condition is ignored. 3.2 Ichimoku Lines Above/Below Cloud Purpose: stronger trend confirmation: Ichimoku lines should also be on the “correct” side of the cloud. Long Lines Filter: Long allowed only if Conversion Line and Base Line are both above the cloud. Short Lines Filter: Short allowed only if both lines are below the cloud. If this filter is OFF, the conditions are not checked. 3.3 MA Direction Filter As described above: When ON: Close > MA → only Longs. Close < MA → only Shorts. 4. Anti-Re-Entry Logic (Cloud Touch Reset) The strategy uses internal flags to avoid continuous re-entries in the same direction without a reset. Two flags: allowLong allowShort After a Long entry, allowLong is set to false, allowShort to true. After a Short entry, allowShort is set to false, allowLong to true. Flags are reset when price touches the Kumo: If Low goes into the cloud → allowLong = true If High goes into the cloud → allowShort = true If Close is inside the cloud → both allowLong and allowShort are set to true There is a key option: Wait Position Close Before Flag Reset If ON: cloud touch will reset flags only when there is no open position. If OFF: flags can be reset even while a trade is open. This gives a kind of regime-based re-entry control: after a trend leg, you wait for a “cloud interaction” to allow new signals. 5. Risk Management All risk management is handled inside the strategy. 5.1 Position Sizing Order Size % of Equity – default 10% The strategy calculates: position_value = equity * (Order Size % / 100) position_qty = position_value / close So position size automatically adapts to your current equity. 5.2 Take Profit Modes You can choose one of two TP modes: Percent Fibonacci 5.2.1 Percent Mode Single Take Profit at X% from entry (default 2%). For Long: TP = entry_price * (1 + tp_pct / 100) For Short: TP = entry_price * (1 - tp_pct / 100) One strategy.exit per side is used: "Long TP/SL" and "Short TP/SL". 5.2.2 Fibonacci Mode (2 partial TPs) In this mode, TP levels are based on a virtual Fib-style extension between entry and stop-loss. Inputs: Fib TP1 Level (default 1.618) Fib TP2 Level (default 2.5) TP1 Share % (Fib) (default 50%) TP2 share is automatically 100% - TP1 share. Process for Long: Compute a reference Stop (see SL section below) → sl_for_fib. Compute distance: dist = entry_price - sl_for_fib. TP levels: TP1 = entry_price + dist * (Fib TP1 Level - 1) TP2 = entry_price + dist * (Fib TP2 Level - 1) For Short, the logic is mirrored. Two exits are used: TP1 – closes TP1 share % of position. TP2 – closes remaining TP2 share %. Same stop is used for both partial exits. 5.3 Stop-Loss Modes You can choose one of three Stop Loss modes: Stable – fixed % from entry. Ichimoku – fixed level derived from the Kumo. Ichimoku Trailing – dynamic SL following the cloud. 5.3.1 Stable SL For Long: SL = entry_price * (1 - Stable SL % / 100) For Short: SL = entry_price * (1 + Stable SL % / 100) Used both for Percent TP mode and as reference for Fib TP if Kumo is not available. 5.3.2 Ichimoku SL (fixed, non-trailing) At the time of a new trade: For Long: Base SL = cloud bottom minus small offset (%) For Short: Base SL = cloud top plus small offset (%) The offset is configurable: Ichimoku SL Offset %. Once computed, that SL level is fixed for this trade. 5.3.3 Ichimoku Trailing SL Similar to Ichimoku SL, but recomputed each bar: For Long: SL = cloud bottom – offset For Short: SL = cloud top + offset A red trailing SL line is drawn on the chart to visualize current stop level. This trailing SL is also used as reference for BreakEven and for Fib TP distance. 6. BreakEven Logic (with BE Lines) BreakEven is optional and supports two modes: Percent Fibonacci Inputs: Percent mode: BE Trigger % (from entry) – move SL to BE when price goes this % in profit. BE Offset % from entry – SL will be set to entry ± this offset. Fibonacci mode: BE Fib Level – Fib level at which BE will be activated (default 1.618, same style as TP). BE Offset % from entry – how far from entry to place BE stop. The logic: Before BE is triggered, SL follows its normal mode (Stable/Ichimoku/Ichimoku Trailing). When BE triggers: For Long: New SL = max(current SL, BE SL). For Short: New SL = min(current SL, BE SL). This means BE will never loosen the stop – only tighten it. When BE is activated, the strategy draws a violet horizontal line at the BreakEven level (once per trade). BE state is cleared when the position is closed or when a new position is opened. 7. Entry & Exit Logic (Summary) 7.1 Long Entry Conditions for a Long: CCI signal: CCI crosses up through the upper threshold. Ichimoku Cloud Filter (optional): If enabled → price must be above the Kumo. Ichimoku Lines Filter (optional): If enabled → Conversion Line and Base Line must be above the Kumo. MA Direction Filter (optional): If enabled → Close must be above the chosen MA. Anti-re-entry flag: allowLong must be true (cloud-based reset). Position check: Long entries are allowed when current position size ≤ 0 (so it can also reverse from short to long). If all these conditions are true, the strategy sends: strategy.entry("Long", strategy.long, qty = calculated_qty) After entry: allowLong = false allowShort = true 7.2 Short Entry Same structure, mirrored: CCI signal: CCI crosses down through the lower threshold. Cloud filter: price must be below cloud (if enabled). Lines filter: conversion & base must be below cloud (if enabled). MA filter: Close must be below MA (if enabled). allowShort must be true. Position check: position size ≥ 0 (allows reversal from long to short). Then: strategy.entry("Short", strategy.short, qty = calculated_qty) Flags update: allowShort = false allowLong = true 7.3 Exits While in a position: The strategy continuously recalculates SL (depending on chosen mode) and, in Percent mode, TP. In Fib mode, fixed TP levels are computed at entry. BreakEven may raise/tighten the SL if its conditions are met. Exits are executed via strategy.exit: Percent mode: one TP+SL exit per side. Fib mode: two partial exits (TP1 and TP2) sharing the same SL. At position open, the script also draws visual lines: White line — entry price. Green line(s) — TP level(s). Red line — SL (if not using Ichimoku Trailing; with trailing, the red line is updated dynamically). Maximum of 30 lines are kept to avoid clutter. 8. How to Use the Strategy Choose market & timeframe Works well on trending instruments. Try crypto, FX or indices on H1–H4, or intraday if you prefer more trades. Adjust Ichimoku settings Keep defaults (9/26/52/26) or adapt to your timeframe. Configure Moving Average Typical: EMA 200 as a trend filter. Turn MA Direction Filter ON if you want to trade only with the main trend. Set CCI thresholds Default ±100 is classic. Lower thresholds → more signals, higher noise. Higher thresholds → fewer but stronger signals. Enable/disable filters Turn on Ichimoku Cloud and Ichimoku Lines if you want only “clean” trend trades. Use Wait Position Close Before Flag Reset to control how often re-entries are allowed. Choose TP & SL mode Percent mode is simpler and easier to understand. Fibonacci mode is more advanced: it aligns TP levels with the distance to stop, giving asymmetric RR setups (two partial TPs). Choose Stable SL for fixed-risk trades, or Ichimoku / Ichimoku Trailing to tie stops to the cloud structure. Set BreakEven Enable BE if you want to lock in risk-free trades after a certain move. Percent mode is straightforward; Fib mode keeps BreakEven in harmony with your Fib TP setup. Run Backtest & Optimize Press “Add to chart” → go to Strategy Tester. Adjust parameters to your market and timeframe. Look at equity curve, PF, drawdown, average trade, etc. Live / Paper Trading After you’re satisfied with backtest results, use the strategy to generate signals. You can mirror entries/exits manually or connect them to alerts (if you build an alert-based execution layer).
אסטרטגיית Pine Script®
מאת ‎RezzoRedPriest‎
RSI adaptive zones [AdaptiveRSI]This script introduces a unified mathematical framework that auto-scales oversold/overbought and support/resistance zones for any period length. It also adds true RSI candles for spotting intrabar signals. Built on the Logit RSI foundation, this indicator converts RSI into a statistically normalized space, allowing all RSI lengths to share the same mathematical footing. What was once based on experience and observation is now grounded in math. ✦ ✦ ✦ ✦ ✦ 💡 Example Use Cases RSI(14): Classic overbought/oversold signals + divergence Support in an uptrend using RSI(14) Range breakouts using RSI(21) Short-term pullbacks using RSI(5) ✦ ✦ ✦ ✦ ✦ THE PAST: RSI Interpretation Required Multiple Rulebooks Over decades, RSI practitioners discovered that RSI behaves differently depending on trend and lookback length: • In uptrends, RSI tends to hold higher support zones (40–50) • In downtrends, RSI tends to resist below 50–60 • Short RSIs (e.g., RSI(2)) require far more extreme threshold values • Longer RSIs cluster near the center and rarely reach 70/30 These observations were correct — but lacked a unifying mathematical explanation. ✦ ✦ ✦ ✦ ✦ THE PRESENT: One Framework Handles RSI(2) to RSI(200) Instead of using fixed thresholds (70/30, 90/10, etc.), this indicator maps RSI into a normalized statistical space using: • The Logit transformation to remove 0–100 scale distortion • A universal scaling based on 2/√(n−1) scaling factor to equalize distribution shapes As a result, RSI values become directly comparable across all lookback periods. ✦ ✦ ✦ ✦ ✦ 💡 How the Adaptive Zones Are Calculated The adaptive framework defines RSI zones as statistical regimes derived from the Logit-transformed RSI . Each boundary corresponds to a standard deviation (σ) threshold, scaled by 2/√(n−1), making RSI distributions comparable across periods. This structure was inspired by Nassim Nicholas Taleb’s body–shoulders–tails regime model: Body (±0.66σ) — consolidation / equilibrium Shoulders (±1σ to ±2.14σ) — trending region Tails (outside of ±2.14σ) — rare, high-volatility behavior Transitions between these regimes are defined by the derivatives of the position (CDF) function : • ±1σ → shift from consolidation to trend • ±√3σ → shift from trend to exhaustion Adaptive Zone Summary Consolidation: −0.66σ to +0.66σ Support/Resistance: ±0.66σ to ±1σ Uptrend/Downtrend: ±1σ to ±√3σ Overbought/Oversold: ±√3σ to ±2.14σ Tails: outside of ±2.14σ ✦ ✦ ✦ ✦ ✦ 📌 Inverse Transformation: From σ-Space Back to RSI A final step is required to return these statistically normalized boundaries back into the familiar 0–100 RSI scale. Because the Logit transform maps RSI into an unbounded real-number domain, the inverse operation uses the hyperbolic tangent function to compress σ-space back into the bounded RSI range. RSI(n) = 50 + 50 · tanh(z / √(n − 1)) The result is a smooth, mathematically consistent conversion where the same statistical thresholds maintain identical meaning across all RSI lengths, while still expressing themselves as intuitive RSI values traders already understand. ✦ ✦ ✦ ✦ ✦ Key Features Mathematically derived adaptive zones for any RSI period Support/resistance zone identification for trend-aligned reversals Optional OHLC RSI bars/candles for intrabar zone interactions Fully customizable zone visibility and colors Statistically consistent interpretation across all markets and timeframes Inputs RSI Length — core parameter controlling zone scaling RSI Display : Line / Bar / Candle visualization modes ✦ ✦ ✦ ✦ ✦ 💡 How to Use This indicator is a framework , not a binary signal generator. Start by defining the question you want answered, e.g.: • Where is the breakout? • Is price overextended or still trending? • Is the correction ending, or is trend reversing? Then: Choose the RSI length that matches your timeframe Observe which adaptive zone price is interacting with Interpret market behavior accordingly Example: Long-Term Trend Assesment using RSI(200) A trader may ask: "Is this a long term top?" Unlikely, because RSI(200) holds above Resistance zone , therefore the trend remains strong. ✦ ✦ ✦ ✦ ✦ 👉 Practical tip: If you used to overlay weekly RSI(14) on a daily chart (getting a line that waits 5 sessions to recalculate), you can now read the same long-horizon state continuously : set RSI(70) on the daily chart (~14 weeks × 5 days/week = 70 days) and let the adaptive zones update every bar . Note: It won’t be numerically identical to the weekly RSI due to lookback period used, but it tracks the same regime on a standardized scale with bar-by-bar updates. ✦ ✦ ✦ ✦ ✦ Note: This framework describes statistical structure, not prediction. Use as part of a complete trading approach. Past behavior does not guarantee future outcomes. framework ≠ guaranteed signal --- Attribution & License This indicator incorporates: • Logit transformation of RSI • Variance scaling using 2/√(n−1) • Zone placement derived from Taleb’s body–shoulders–tails regime model and CDF derivatives • Inverse TANH(z) transform for mapping z-scores back into bounded RSI space Released under CC BY-NC-SA 4.0 — free for non-commercial use with credit. © AdaptiveRSI
אינדיקטור Pine Script®
מאת ‎AdaptiveRSI‎
GRA v5 SNIPER# GRA v5 SNIPER - Documentation & Cheatsheet ## 🎯 Get Rich Aggressively v5 - SNIPER Edition **Precision Futures Scalping | NQ • ES • YM • GC • BTC** > **Philosophy:** *Quality over quantity. One sniper shot beats ten spray-and-pray attempts.* --- ## ⚡ QUICK CHEATSHEET ``` ┌─────────────────────────────────────────────────────────────────────────────┐ │ GRA v5 SNIPER - QUICK REFERENCE │ ├─────────────────────────────────────────────────────────────────────────────┤ │ │ │ 🎯 SIGNAL REQUIREMENTS (ALL MUST BE TRUE): │ │ ═══════════════════════════════════════════ │ │ ✓ Tier → B minimum (20+ pts NQ) │ │ ✓ Volume → 1.5x+ average │ │ ✓ Delta → 60%+ dominance (buyers OR sellers) │ │ ✓ Body → 70%+ of candle range │ │ ✓ Range → 1.3x+ average candle size │ │ ✓ Wicks → Small opposite wick (<50% of body) │ │ ✓ CVD → Trending with signal direction │ │ ✓ Session → London (3-5am ET) OR NY (9:30-11:30am ET) │ │ │ ├─────────────────────────────────────────────────────────────────────────────┤ │ │ │ 📊 TIER ACTIONS: │ │ ════════════════ │ │ S-TIER (100+ pts) → 🥇 HOLD position, ride the wave │ │ A-TIER (50-99 pts) → 🥈 SWING for 2-3 minutes │ │ B-TIER (20-49 pts) → 🥉 SCALP quick, 30-60 seconds │ │ │ ├─────────────────────────────────────────────────────────────────────────────┤ │ │ │ 🚨 ENTRY CHECKLIST: │ │ ═══════════════════ │ │ □ Signal appears (S🎯, A🎯, or B🎯) │ │ □ Table shows: Vol GREEN, Delta colored, Body GREEN │ │ □ CVD arrow matches direction (▲ for long, ▼ for short) │ │ □ Session active (LDN! or NY! in yellow) │ │ □ Enter at close of signal candle │ │ │ ├─────────────────────────────────────────────────────────────────────────────┤ │ │ │ ⛔ DO NOT TRADE WHEN: │ │ ════════════════════ │ │ ✗ Session shows "---" (outside key hours) │ │ ✗ Vol shows RED (below 1.5x) │ │ ✗ Body shows RED (weak candle structure) │ │ ✗ Delta below 60% (no clear dominance) │ │ ✗ Multiple conflicting signals │ │ │ ├─────────────────────────────────────────────────────────────────────────────┤ │ │ │ 📈 INSTRUMENT SETTINGS: │ │ ════════════════════════ │ │ NQ/ES (1-3 min): S=100, A=50, B=20 pts │ │ YM (1-5 min): S=100, A=50, B=25 pts │ │ GC (5-15 min): S=15, A=8, B=4 pts │ │ BTC (1-15 min): S=500, A=250, B=100 pts │ │ │ └─────────────────────────────────────────────────────────────────────────────┘ ``` --- ## 📋 DETAILED DOCUMENTATION ### What Makes SNIPER Different? The SNIPER edition eliminates 80%+ of signals compared to standard GRA. Every signal that passes through has been validated by **8 independent filters**: | Filter | Standard GRA | SNIPER GRA | Why It Matters | |--------|-------------|------------|----------------| | Volume | 1.3x avg | **1.5x avg** | Institutional participation | | Delta | 55% | **60%** | Clear buyer/seller control | | Body Ratio | None | **70%+** | No dojis or spinners | | Range | None | **1.3x avg** | Significant price movement | | Wicks | None | **<50% body** | Conviction in direction | | CVD | None | **Required** | Trend confirmation | | B-Tier Min | 10 pts | **20 pts** | Filter noise | | Session | Optional | **Required** | Institutional hours | --- ### Signal Anatomy When you see a signal like `A🎯`, here's what passed validation: ``` Signal: A🎯 LONG at 21,450.00 Validation Breakdown: ├── Points: 67.5 pts ✓ (A-Tier = 50-99) ├── Volume: 2.1x avg ✓ (≥1.5x required) ├── Delta: 68% Buyers ✓ (≥60% required) ├── Body: 78% of range ✓ (≥70% required) ├── Range: 1.6x avg ✓ (≥1.3x required) ├── Wick: Upper 15% ✓ (<50% of body) ├── CVD: ▲ Rising ✓ (Matches LONG) └── Session: NY! ✓ (Active session) RESULT: VALID SNIPER SIGNAL ``` --- ### Table Legend | Field | Reading | Color Meaning | |-------|---------|---------------| | **Pts** | Point movement | Gold/Green/Yellow = Tiered | | **Tier** | S/A/B/X | Gold/Green/Yellow/White | | **Vol** | Volume ratio | 🟢 ≥1.5x, 🔴 <1.5x | | **Delta** | Buy/Sell % | 🟢 Buy dom, 🔴 Sell dom, ⚪ Neutral | | **Body** | Body % of range | 🟢 ≥70%, 🔴 <70% | | **CVD** | Cumulative delta | ▲ Bullish trend, ▼ Bearish trend | | **Sess** | Session status | 🟡 Active, ⚫ Inactive | --- ### Trading Rules #### Entry Rules 1. **Wait for signal** - Don't anticipate 2. **Verify table** - All conditions GREEN 3. **Enter at candle close** - Not during formation 4. **Position size by tier:** - S-Tier: Full size - A-Tier: 75% size - B-Tier: 50% size #### Exit Rules | Tier | Target | Max Hold Time | |------|--------|---------------| | S | Let it run | 5-10 minutes | | A | 1:1.5 R:R | 2-3 minutes | | B | 1:1 R:R | 30-60 seconds | #### Stop Loss - Place at **opposite end of signal candle** - For S-Tier: Allow 50% retracement - For B-Tier: Tight stop, quick exit --- ### Session Priority ``` LONDON OPEN (3:00-5:00 AM ET) ════════════════════════════ • Best for: GC, European indices • Characteristics: Stop hunts, reversals • Look for: Sweeps of Asian session levels NY OPEN (9:30-11:30 AM ET) ════════════════════════════ • Best for: NQ, ES, YM • Characteristics: High volume, trends • Look for: Continuation after 10 AM ``` --- ### Common Mistakes to Avoid | Mistake | Why It's Bad | Solution | |---------|-------------|----------| | Trading outside sessions | Low volume = fake moves | Wait for LDN! or NY! | | Ignoring weak body | Dojis reverse | Body must be 70%+ | | Fighting CVD | Swimming upstream | CVD must confirm | | Oversizing B-Tier | Small moves = small size | 50% max on B | | Chasing missed signals | FOMO loses money | Wait for next setup | --- ### Alert Setup Configure these alerts in TradingView: | Alert | Priority | Action | |-------|----------|--------| | 🎯 S-TIER LONG/SHORT | 🔴 High | Drop everything, check chart | | 🎯 A-TIER LONG/SHORT | 🟠 Medium | Evaluate within 30 seconds | | 🎯 B-TIER LONG/SHORT | 🟢 Low | Quick glance if available | | LONDON/NY OPEN | 🔵 Info | Prepare for action | --- ### Pine Script v6 Notes This indicator uses Pine Script v6 features: - `request.security_lower_tf()` for intrabar delta - Type inference for cleaner code - Array operations for CVD calculation **Minimum TradingView Plan:** Pro (for intrabar data) --- ## 🏆 Golden Rule > **"If you have to convince yourself it's a good signal, it's not a good signal."** The SNIPER edition is designed so that when a signal appears, there's nothing to think about. If all conditions are met, you trade. If any condition fails, you wait. **Leave every trade with money. That's the goal.** --- *© Alexandro Disla - Get Rich Aggressively v5 SNIPER* *Pine Script v6 | TradingView*
אינדיקטור Pine Script®
מאת ‎alexandrodisla‎
Round Number Analyzer v3Round Number Analyzer v3 is an indicator designed to analyze how price interacts with round number levels (levels spaced at fixed intervals in points or pips). The indicator does not generate entry/exit signals, but provides detailed statistics to better understand market dynamics around these key levels. ✨ Key Features Cross Counting: detects every time the price crosses a round number level (up = Long, down = Short). Continuations & Reversals: classifies each cross as: Continuation: the move continues in the same direction as the previous sequence. Reversal: the move changes direction compared to the previous sequence. Sequence Classification (L1…L5+): each level is labelled based on its position within the consecutive cross sequence: L1 = first level of the sequence, L2 = second consecutive, … L5+ = fifth or higher. Comprehensive Stats Table (top right corner): Total crosses (Long, Short, Totals). Total continuations + breakdown by L1…L5+. Total reversals + breakdown by L1…L5+. Percentages calculated against the proper denominator, displayed directly inside the cells next to the absolute values. Date range of analysis (user-defined). Customizable Step: Works in both points and pips, making the indicator suitable for indices and forex. ⚙️ Main Inputs Start date / End date → sets the analysis period. Step mode → Points or Pips. Step value → distance between round levels. Pip size → pip size (default = 0.0001, typical for forex). 📈 How to Interpret A high continuation percentage after L1–L2 suggests the market tends to extend multiple times beyond the first breakout levels. Higher reversal percentages at advanced levels (L4–L5+) may signal trend exhaustion. The analysis helps estimate the probability of continuation or reversal depending on how many consecutive levels have already been crossed. 🔎 Practical Applications Support for breakout or mean-reversion strategies. Comparative analysis across different markets (e.g. indices vs forex) or different time periods. 📝 Notes The indicator is timeframe-robust, as it accounts for multiple steps within the same candle, ensuring results do not depend on the selected timeframe (except for TradingView’s historical data limits). It does not provide automatic trading signals, but serves as a quantitative analysis tool to refine your strategies. --- Round Number Analyzer v3 è un indicatore pensato per analizzare come il prezzo interagisce con i livelli di round number (livelli a distanza fissa in punti o pips). L’indicatore non genera segnali di ingresso/uscita, ma fornisce statistiche dettagliate utili per comprendere la dinamica del mercato attorno a questi livelli. ✨ Funzionalità principali Conteggio dei Cross: rileva ogni volta che il prezzo attraversa un livello round (verso l’alto = Long, verso il basso = Short). Continuations & Reversals: classifica ogni attraversamento come: Continuation: il movimento prosegue nella stessa direzione della sequenza precedente. Reversal: il movimento inverte la direzione rispetto alla sequenza precedente. Classificazione per sequenza (L1…L5+): ogni livello è etichettato in base alla sua posizione nella sequenza di cross consecutivi: L1 = primo livello della sequenza, L2 = secondo consecutivo, … L5+ = quinto o superiore. Statistiche complete in tabella (in alto a destra): Cross totali (Long, Short, Totals). Continuations totali + breakdown per L1…L5+. Reversals totali + breakdown per L1…L5+. Percentuali calcolate sul denominatore corretto, mostrate direttamente dentro le celle accanto ai valori assoluti. Date range di analisi (impostabile dall’utente). Step personalizzabile: puoi lavorare sia in punti che in pips, così l’indicatore è adatto sia per indici che per forex. ⚙️ Input principali Start date / End date → imposta l’intervallo temporale di analisi. Step mode → punti o pips. Step value → ampiezza tra i livelli round. Pip size → dimensione del pip (default = 0.0001, tipico per il forex). 📈 Come interpretarlo Una percentuale di continuation molto alta dopo L1–L2 indica che il mercato tende a proseguire più volte oltre i primi livelli di breakout. Percentuali di reversal più elevate nei livelli avanzati (L4–L5+) possono suggerire esaurimento della spinta. L’analisi permette di stimare la probabilità che un movimento in corso continui o si inverta in base a quanti livelli sono già stati attraversati consecutivamente. 🔎 Applicazioni pratiche Supporto per strategie di breakout o mean reversion. Analisi comparativa tra mercati (es. indici vs forex) o tra periodi temporali diversi. 📝 Note L’indicatore è timeframe-robust: il conteggio tiene conto di multipli step dentro la stessa candela, così i risultati non dipendono dal timeframe scelto (salvo i limiti di caricamento storico di TradingView). Non fornisce segnali operativi automatici, ma è un tool di analisi quantitativa per affinare le proprie strategie.
אינדיקטור Pine Script®
מאת ‎steviatrades‎
Mean Reversion Indictor, Based on Standard Deviations Description: The Reversal Candle Mean Reversion Indicator is designed for traders seeking to identify potential reversal points in the market based on key price action and volatility. This indicator combines price action analysis (sweeping prior highs or lows) with mean reversion theory, highlighting opportunities where the price tests or touches a moving average's standard deviation bands. By focusing on these moments of price extremes, the indicator helps traders spot bullish and bearish reversal signals when the price retraces from volatile movements. These conditions often signal a return to the mean—an ideal setup for reversal traders who thrive on fading exaggerated price moves. How It Works: 1. Price Action Reversal Signal: * Bullish Reversal: The indicator flags a bullish signal when the current candle's low sweeps the prior candle's low, and the candle closes higher than the prior candle's close. * Bearish Reversal: The indicator flags a bearish signal when the current candle's high sweeps the prior candle's high, and the candle closes lower than the prior candle's close. 2. Mean Reversion Confirmation: * Mean Reversion Signal is triggered when the price touches or tests the upper or lower bands, calculated using a user-selected moving average (SMA, EMA, WMA, VWMA, or Hull MA) and standard deviation. * The indicator combines price action and volatility, providing stronger reversal signals when the price reaches an extreme distance from the moving average. 3. Customization Options: * Moving Average Type: Choose from SMA, EMA, WMA, VWMA, or Hull MA. * Moving Average Length: Adjust the length of the moving average (default: 20). * Standard Deviation Multiplier: Set the number of standard deviations for the volatility bands (default: 2.0). * Custom Candle Colors: Choose custom colors for bullish and bearish reversal candles to easily spot signals. How to Use for Trading Reversals: 1. Identify Extremes: * Watch for candles where the price tests or touches the standard deviation bands. These are key moments when the price has moved significantly from the moving average, indicating a potential overbought or oversold condition. 2. Look for Reversals: * When the price tests a band and simultaneously forms a bullish reversal pattern (sweeping the prior low and closing higher), it signals a potential mean reversion to the upside. * When the price tests a band and forms a bearish reversal pattern (sweeping the prior high and closing lower), it signals a potential mean reversion to the downside. 3. Entry Points: * Long Trades: Enter a long trade after a bullish signal appears (green candle) near the lower band, indicating a likely price reversal back towards the mean. * Short Trades: Enter a short trade after a bearish signal appears (red candle) near the upper band, indicating a likely price pullback. 4. Exit Strategy: * Set a profit target at the moving average (the mean) or a specific price level based on your strategy. * Consider using a trailing stop to capture additional profit in case of a stronger reversal beyond the mean. 5. Risk Management: * Place stops just below the low of the bullish reversal candle or just above the high of the bearish reversal candle to manage risk efficiently.
אינדיקטור Pine Script®
מאת ‎thinkCNE‎
Geometric Trend Angle [AstroHub]This script, "Geometric Trend Angle," is designed to identify trend reversals based on the geometric angle of the price chart. Here's a detailed explanation of its originality, functionality, and usage: Originality and Usefulness: The uniqueness of this script lies in its approach to trend reversal detection through the calculation of the geometric trend angle. Unlike traditional methods, this script combines the analysis of the angle of the price movement with specific conditions for identifying potential trend reversals. How it Works: Length and Trend Angle: The user sets the "Length" parameter, determining the period for calculating the trend angle. The script then computes the trend angle, representing the change in prices over the specified period. Trend Reversal: The script identifies potential trend reversals when the trend angle changes from positive to negative, and the current closing price is higher than the previous closing price. Green Reversal: Additionally, the script looks for instances where the trend angle changes from negative to positive, and the current closing price is lower than the previous closing price, indicating a potential reversal to the downside. Graphical Representation: The script visually highlights the identified reversal points on the chart with labels ("Trend Reversal" and "Green Reversal") and draws a line from the reversal point for better visualization. Alerts: Traders are alerted to potential trend reversals and green reversals, allowing for timely responses to changing market dynamics. How to Use: Apply the script to your TradingView chart. Customize the "Length" parameter based on your preference and analysis. Observe the colored candles and graphical elements to identify potential trend reversals. Pay attention to alerts for timely notifications of reversal signals. Conclusion: The "Geometric Trend Angle" script provides a unique perspective on trend reversals, combining geometric angle analysis with specific conditions for improved accuracy. Traders can use it as part of their overall analysis to make informed decisions in the dynamic market environment.
אינדיקטור Pine Script®
מאת ‎AstroHub‎