התחל

חפש סקריפטים עבור "摩根纳斯达克100基金风险大吗"

Chart OscillatorI present you the chart oscillator where an oscillator (Stoch or RSI) is plotted on the chart itself (instead of below the chart) It is inspired on an idea of @Kablamicus Instead of having the lines between 0 and 100, here the '0-100' are - lowest(low, len) - highest(high, len) An overbought/oversold and a middle line is derived from these lines and the oscillator goes in between. It resembles very much the 'normal' oscillator, with a few extra's: - you can see the movement of the candles against the oscillator - S/R levels of oscillator, 50 line, overbought/oversold line, 0-100 line Stoch: RSI: Also a table is included with the Stoch/RSI values Cheers!
אינדיקטור Pine Script®
מאת ‎fikira‎
51
stop out or margin call price levelsAbstract This script finds the potential stop out or margin call price levels without considering timeframe. This script computes stop out or margin call price levels that over leveraged positions buy cheap enough. You can use this indicator to follow stop hunters. Introduction Stop hunting exists because of benefit conflict. When most of retails traders are in the correct direction, big banks do not want to buy more expensive then retail traders. Therefore, Big banks create sell pressure to make retail traders misunderstand their trade decisions are wrong. When retail traders decide to cut loss, it is time big banks buy cheaper. Many courses recommend average true range as a stop loss reference. However, in different timeframe, average true ranges are different. Therefore, we need to have a method to measure potential stop hunting levels which is not relative to timeframe. There is a method because there are observable levels where over leveraged positions must cut loss. For example, for a 100 leverage position, its margin call level is 0.005, so 0.005 drawdown is a potential stop hunting level. Computing For buy potential stop out or margin call price level = low * ( 1 - ratio ) For sell potential stop out or margin call price level = high * ( 1 + ratio ) Parameters There are 4 levels available for adjusting. The default values are : (1) 0.001 : 500 leverage , 50% margin call (2) 0.0025 : 200 leverage , 50% margin call (3) 0.005 : 100 leverage , 50% margin call (4) 0.010 : 50 leverage , 50% margin call Usage (1) Find an oversold price level. If you don't want to use an another indicator, you can use previous low. (2) Memorize their stop out or margin call price levels of that level. (2) Consider buy near those levels. (3) If there are quick price rejection near those levels, better entry opportunities. (4) Take profit and stop loss : you decide. Conclusion This script can find potential stop out or margin call price levels that over leveraged positions buy cheap enough. If you are bored, you can consider find 100 signals you are interested in and share your observation. Reference Brokers, leverage and margin call threshold
אינדיקטור Pine Script®
מאת ‎clocks156t174‎
1
RedK_Relative (Dual) Rate Of Change v1 - RROC v1Quick Summary ============== The Relative Rate of Change (RRoC) is an expanded version of the classic Rate of Change (RoC) indicator - we apply couple of changes to bring additional insights and signals from that classic Technical Analysis concept - which can help us better visualize the "relative speed of change" of a stock (or whatever we trade), and can work specifically as a "breakout finder" .. please read on if this can be valuable to your trading. First, a quick review of what is the classic Rate of Change (RoC) - The below part is from Investopedia definition of RoC ----------------------------------------------------------------------------------- www.investopedia.com What is Rate of Change (ROC) The rate of change (ROC) is the speed at which a variable changes over a specific period of time. ROC is often used when speaking about momentum, and it can generally be expressed as a ratio between a change in one variable relative to a corresponding change in another; graphically, the rate of change is represented by the slope of a line. Understanding Rate of Change (ROC) Rate of change is used to mathematically describe the percentage change in value over a defined period of time, and it represents the momentum of a variable . The calculation for ROC is simple in that it takes the current value of a stock or index and divides it by the value from an earlier period. Subtract one and multiply the resulting number by 100 to give it a percentage representation. ROC = (current value / previous value - 1) * 100 ------------------------------------------------------------------------------------------------- What changes did we make to the RoC? ==================================== (1) - Per the official definition, the original RoC should provide a "rate of change" - i.e., we should say "the 5-bar average price change for AAPL is x% per bar" - now norice that the formula doesn't divide by the number of bars (length) -- so the reality is, the results is more of "the 5-bar price change for apple is x% for the full 5 bar length" - what is wrong with that ? nothing really, but it's harder to use that number to set my trade target or exit. i need the indicator to give me a number that represents the "average change per bar" so i can use it to "design my trade target and my exit loss" -- so in the RRoC, we divide the change by the number of bars used in the settings The updated formula would be : RoC = (current value / previous value -1 ) * 100 / length (2) - Dual Length: we make the RoC relative, by adding a longer (or slow) RoC - the idea here is simple - imagine you're driving your car beside a moving train, your car will not "breakout" from the train until your speed (= distance gain per unit of time) is faster than the train - so in reality, your baseline is not 0 speed, it's the speed of that train your racing against -- makes sense? - so we add a second length that can act as a baseline - when the Fast RoC exceeds the Slow RoC (your car is faster than the train), a breakout would possibly occur - that breakout may fail (if something interrupts it - my car may breakdown if it can't handle the faster speed :) ) or it can fully materialize if the "context" is favorable. as we can see on the above chart, we can use the RRoC to identify an incoming possible breakout using that simple "relative speed" concept - and that setup happened not once but twice in our example the interpretation of this for AAPL would be (for example): "AAPL has been making an average change of 0.22% in the past 20 days, but for the last 5 days, the average change was 0.35% - so it looks like AAPL is gaining short term momentum and may break-out soon" (3) this is another strong feature: Use for broader context: - we can set the RRoC for a resolution of - for example - a day, while we look at the 1 hour chart - giving us the ability to trade on a smaller timeframe in the context of a larger timeframe .. this is more of an advanced feature but i hope some will be able to leverage it. Here's a side-by-side comparison of RRoC vs the classic (built-in) RoC indicator Conclusion: ============ - The (Relative Rate of Change) RRoC expands on the concepts presented by the classic Rate of Change (RoC) indicator and enables additional insights - especially around the discovery of potential price breakout - leverage the RRoC indicator settings to tweak it to how your trade (fast length, slow length, resolution, smoothing). the defaults should work for any instrument but may not necessarily be the optimal settings - use in conjunction with other indicators that can show trend and prevailing sentiment / context - to ensure you get proper confirmation and please get very familiar with how the RRoC works before you use it for live trading. Comments are welcome - Best of luck -
אינדיקטור Pine Script®
מאת ‎RedKTrader‎
9
Bollinger on Bollinger OscillatorThis study is a user-friendly workaround to the BBOE+ (attached at the bottom). I applied Bollinger Bands on BB Oscillator which spend his time bouncing between +100 -100 levels both representing extremes market conditions. You can use it to spot reliable entries/exits opportunities. During an uptrend when the oscillator tends to -100 and the lower BB turn up you should consider a BUY. Do the same thing when the oscillator pushes under the lower BB nearby the Zero Line. Make the opposite during a downtrend. Also look for divergencies that occurs nearby the borders and BB squeezes too. You can vary both the lenght for the Oscillator and BB. Use “Upper Multiplier” and “Lower Multiplier” to set two different StDev from the basis (if you need). You may also consider to apply an offset to the BB. Is up to you to match the configuration that better-fits your market and time frame. Default settings could well fits this IXIC 4H Chart. So that this is basically a price-based indicator you would better consider to pair it with a volume-based or an absolute-momentum-based one. SHARING IS INTENDED FOR EDUCATIONAL PURPOSE ONLY. NOT FOR PROFESSIONAL USE. WILL APPRECIATE ANY FEEDBACK, QUESTION, SUGGESTION. (*) (*) Please don’t ask me for “magic-setting” that do not exit, nor for “kaleidoscopic effects” cause I’m a big fan of such a minimalistic yet profession layouts. FOLLOW UP TO CHECK UPDATES!
אינדיקטור Pine Script®
מאת ‎Federico_TSL‎
6
ADX with SignalsThis indicator basicly usind ADX ( Average Directional Index ) ADX can show us how trend is strong ADX below 20: the market is currently not trending ADX crosses above 20: signifies that a new trend is emerging. Traders may start placing sell or buy orders in the direction of the price movement. ADX between 20 and 40: When the ADX is growing between 20 and 40 it is considered as a confirmation of an emerging trend. Traders should use this opportunity to buy or short sell in the trend's direction. ADX above 40: the trend is very strong. ADX crosses 50: the trend is extremely strong. ADX crosses 70: a very rare occasion, which is called a “Power Trend.” If we use ADX with DI+ and DI+ indactor can tell us to buy. How can we calculate this all? Directional Movement (DI) is defined as the largest part of the current period’s price range that lies outside the previous period’s price range. For each period calculate: +DI = positive or plus DI = High - Previous High -DI = negative or minus DI = Previous Low - Low The smaller of the two values is reset to zero, i.e., if +DI > -DI , then -DI = 0. On an inside bar (a lower high and higher low), both +DI and -DI are negative values, so both get reset to zero as there was no directional movement for that period. The True Range ( TR ) is calculated for each period, where: TR = Max of ( High - Low ), ( High -PreviousClose ), ( PreviousClose - Low ) The +DI , -DI and TR are each accumulated and smoothed using a custom smoothing method proposed by Wilder. For an n period smoothing, 1/n of each period’s value is added to the total each period, similar to an exponential smoothing: +DIt = (+DIt-1 - (+DIt-1 / n)) + (+DIt) -DIt = (-DIt-1 - (-DIt-1 / n)) + (-DIt) TRt = (TRt-1 - (TRt-1 / n)) + ( TRt ) Compute the positive/negative Directional Indexes, +DI and -DI , as a percentage of the True Range: +DI = ( +DI / TR ) * 100 -DI = ( -DI / TR ) * 100 Compute the Directional Difference as the absolute value of the differences: DIdiff = | (( +DI ) - ( -DI )) | Sum the directional indicator values: DIsum = (( +DI ) + ( -DI )) . Calculate the Directional Movement index: DX = ( DIdiff / DIsum ) * 100 . The DX is always between 0 and 100. Finally, apply Wilder’s smoothing technique to produce the final ADX value: ADXt = ( ( ADXt-1 * ( n - 1) ) + DXt ) / n When indicator tell us to buy? If when DI+ crosses DI- and ADX is bigger than DI- indicator tell us to buy.
אינדיקטור Pine Script®
מאת ‎ErdemDemir‎
2
Ultimate Strategy TemplateHello Traders As most of you know, I'm a member of the PineCoders community and I sometimes take freelance pine coding jobs for TradingView users. Off the top of my head, users often want to: - convert an indicator into a strategy, so as to get the backtesting statistics from TradingView - add alerts to their indicator/strategy - develop a generic strategy template which can be plugged into (almost) any indicator My gift for the community today is my Ultimate Strategy Template Step 1: Create your connector Adapt your indicator with only 2 lines of code and then connect it to this strategy template. For doing so: 1) Find in your indicator where are the conditions printing the long/buy and short/sell signals. 2) Create an additional plot as below I'm giving an example with a Two moving averages cross. Please replicate the same methodology for your indicator wether it's a MACD, ZigZag, Pivots, higher-highs, lower-lows or whatever indicator with clear buy and sell conditions //@version=4 study(title='Moving Average Cross', shorttitle='Moving Average Cross', overlay=true, precision=6, max_labels_count=500, max_lines_count=500) type_ma1 = input(title="MA1 type", defval="SMA", options= ) length_ma1 = input(10, title = "   MA1 length", type=input.integer) type_ma2 = input(title="MA2 type", defval="SMA", options= ) length_ma2 = input(100, title = "   MA2 length", type=input.integer) // MA f_ma(smoothing, src, length) => iff(smoothing == "RMA", rma(src, length), iff(smoothing == "SMA", sma(src, length), iff(smoothing == "EMA", ema(src, length), src))) MA1 = f_ma(type_ma1, close, length_ma1) MA2 = f_ma(type_ma2, close, length_ma2) // buy and sell conditions buy = crossover(MA1, MA2) sell = crossunder(MA1, MA2) plot(MA1, color=color_ma1, title="Plot MA1", linewidth=3) plot(MA2, color=color_ma2, title="Plot MA2", linewidth=3) plotshape(buy, title='LONG SIGNAL', style=shape.circle, location=location.belowbar, color=color_ma1, size=size.normal) plotshape(sell, title='SHORT SIGNAL', style=shape.circle, location=location.abovebar, color=color_ma2, size=size.normal) /////////////////////////// SIGNAL FOR STRATEGY ///////////////////////// Signal = buy ? 1 : sell ? -1 : 0 plot(Signal, title="🔌Connector🔌", transp=100) Basically, I identified my buy, sell conditions in the code and added this at the bottom of my indicator code Signal = buy ? 1 : sell ? -1 : 0 plot(Signal, title="🔌Connector🔌", transp=100) Important Notes 🔥 The Strategy Template expects the value to be exactly 1 for the bullish signal , and -1 for the bearish signal Now you can connect your indicator to the Strategy Template using the method below or that one Step 2: Connect the connector 1) Add your updated indicator to a TradingView chart 2) Add the Strategy Template as well to the SAME chart 3) Open the Strategy Template settings and in the Data Source field select your 🔌Connector🔌 (which comes from your indicator) From then, you should start seeing the signals and plenty of other stuff on your chart 🔥 Note that whenever you'll update your indicator values, the strategy statistics and visual on your chart will update in real-time Settings - Color Candles : Color the candles based on the trade state (bullish, bearish, neutral) - Close positions at market at the end of each session : useful for everything but cryptocurrencies - Session time ranges : Take the signals from a starting time to an ending time - Close Direction : Choose to close only the longs, shorts, or both - Date Filter : Take the signals from a starting date to an ending date - Set the maximum losing streak length with an input - Set the maximum winning streak length with an input - Set the maximum consecutive days with a loss - Set the maximum drawdown (in % of strategy equity) - Set the maximum intraday loss in percentage - Limit the number of trades per day - Limit the number of trades per week - Stop-loss: None or Percentage or Trailing Stop Percentage or ATR - Take-Profit: None or Percentage or ATR - Risk-Reward based on ATR multiple for the Stop-Loss and Take-Profit This script is open-source so feel free to use it, and optimize it as you want Alerts Maybe you didn't know it but alerts are available on strategy scripts. I added them in this template - that's cool because: - if you don't know how to code, now you can connect your indicator and get alerts - you have now a cool template showing you how to create alerts for strategy scripts Source: www.tradingview.com I hope you'll like it, use it, optimize it and most importantly....make some optimizations to your indicators thanks to this Strategy template Special Thanks Special thanks to @JosKodify as I borrowed a few risk management snippets from his website: kodify.net Additional features I thought of plenty of extra filters that I'll add later on this week on this strategy template Best Dave
אסטרטגיית Pine Script®
מאת ‎Daveatt‎
275
IV Rank and Percentile"All stocks in the market have unique personalities in terms of implied volatility (their option prices). For example, one stock might have an implied volatility of 30%, while another has an implied volatility of 50%. Even more, the 30% IV stock might usually trade with 20% IV, in which case 30% is high. On the other hand, the 50% IV stock might usually trade with 75% IV, in which case 50% is low. So, how do we determine whether a stock's option prices (IV) are relatively high or low? The solution is to compare each stock's IV against its historical IV levels. We can accomplish this by converting a stock's current IV into a rank or percentile. Implied Volatility Rank (IV Rank) Explained Implied volatility rank (IV rank) compares a stock's current IV to its IV range over a certain time period (typically one year). Here's the formula for one-year IV rank: (Current IV - 1 Year Low IV) / (1 Year High IV - 1 Year Low IV) * 100 For example, the IV rank for a 20% IV stock with a one-year IV range between 15% and 35% would be: (20% - 15%) / (35% - 15%) = 25% An IV rank of 25% means that the difference between the current IV and the low IV is only 25% of the entire IV range over the past year, which means the current IV is closer to the low end of historical levels of implied volatility. Furthermore, an IV rank of 0% indicates that the current IV is the very bottom of the one-year range, and an IV rank of 100% indicates that the current IV is at the top of the one-year range. Implied Volatility Percentile (IV Percentile) Explained Implied volatility percentile (IV percentile) tells you the percentage of days in the past that a stock's IV was lower than its current IV. Here's the formula for calculating a one-year IV percentile: Number of trading days below current IV / 252 * 100 As an example, let's say a stock's current IV is 35%, and in 180 of the past 252 days, the stock's IV has been below 35%. In this case, the stock's 35% implied volatility represents an IV percentile equal to: 180/252 * 100 = 71.42% An IV percentile of 71.42% tells us that the stock's IV has been below 35% approximately 71% of the time over the past year. Applications of IV Rank and IV Percentile Why does it help to know whether a stock's current implied volatility is relatively high or low? Well, many traders use IV rank or IV percentile as a way to determine appropriate strategies for that stock. For example, if a stock's IV rank is 90%, then a trader might look to implement strategies that profit from a decrease in the stock's implied volatility, as the IV rank of 90% indicates that the stock's current IV is at the top of its range over the past year (for a one-year IV rank). On the other hand, if a stock's IV rank is 0%, then traders might look to implement strategies that profit from an increase in implied volatility, as the IV rank of 0% indicates the stock's current implied volatility is at the bottom of its range over the past year." This script approximates IV by using the VIX products, which calculate the 30-day implied volatility of the specified security. *Includes an option for repainting -- default value is true, meaning the script will repaint the current bar. False = Not Repainting = Value for the current bar is not repainted, but all past values are offset by 1 bar. True = Repainting = Value for the current bar is repainted, but all past values are correct and not offset by 1 bar. In both cases, all of the historical values are correct, it is just a matter of whether you prefer the current bar to be realistically painted and the historical bars offset by 1, or the current bar to be repainted and the historical data to match their respective price bars. As explained by TradingView,`f_security()` is for coders who want to offer their users a repainting/no-repainting version of the HTF data.
אינדיקטור Pine Script®
מאת ‎MartinShkreIi‎
13
Resistances v2[UO] - Uncluttered DisplayThis script shows support-and-resistance levels that span months and weeks. It also shows the levels in the last 100 bars in higher detail. Details detection is only applied to last 100 bars so that your chart is not cluttered with infinite horizontal lines. 100 can be changed in the settings. For example, here, you see the levels in small time frames at a different detail level: This script uses the arrays introduced in pine script v4
אינדיקטור Pine Script®
מאת ‎umur.ozkul‎
1
[blackcat] L2 Ehlers Adaptive Commodity Channel IndexLevel: 2 Background John F. Ehlers introucedAdaptive Commodity Channel Index in his "Rocket Science for Traders" chapter 21 on 2001. Function The Commodity Channel Index (CCI) computes the average of the median price of each bar over the observation period. It also computes the Mean Deviation (MD) from this average. The CCI is formed as the current deviation from the average price normalized to the MD. With a Gaussian probability distribution, 68 percent of all possible outcomes are contained within the first standard deviation from the mean. The CCI is scaled so that values above +l00 are above the upper first standard deviation from the mean and values below -100 are below the lower first standard deviation from the mean. Multiplying the MD in the code by 0.015 implements this normalization. Many traders use this indicator as an overbought/oversold indicator with 100 or greater indicating that the market is overbought, and -100 or less that the market is oversold. Since the trading channel is being formed by the indicator, the obvious observation period is the same as the cycle length. Since the complete cycle period may not be the universal answer, Dr. Ehlers includes a CycPart input as a modifier. This input allows you to optimize the observation period for each particular situation. Key Signal CCI ---> Adaptive Commodity Channel Index fast line CCI ---> Adaptive Commodity Channel Index slow line Pros and Cons 100% John F. Ehlers definition translation of original work, even variable names are the same. This help readers who would like to use pine to read his book. If you had read his works, then you will be quite familiar with my code style. Remarks The 20th script for Blackcat1402 John F. Ehlers Week publication. Readme In real life, I am a prolific inventor. I have successfully applied for more than 60 international and regional patents in the past 12 years. But in the past two years or so, I have tried to transfer my creativity to the development of trading strategies. Tradingview is the ideal platform for me. I am selecting and contributing some of the hundreds of scripts to publish in Tradingview community. Welcome everyone to interact with me to discuss these interesting pine scripts. The scripts posted are categorized into 5 levels according to my efforts or manhours put into these works. Level 1 : interesting script snippets or distinctive improvement from classic indicators or strategy. Level 1 scripts can usually appear in more complex indicators as a function module or element. Level 2 : composite indicator/strategy. By selecting or combining several independent or dependent functions or sub indicators in proper way, the composite script exhibits a resonance phenomenon which can filter out noise or fake trading signal to enhance trading confidence level. Level 3 : comprehensive indicator/strategy. They are simple trading systems based on my strategies. They are commonly containing several or all of entry signal, close signal, stop loss, take profit, re-entry, risk management, and position sizing techniques. Even some interesting fundamental and mass psychological aspects are incorporated. Level 4 : script snippets or functions that do not disclose source code. Interesting element that can reveal market laws and work as raw material for indicators and strategies. If you find Level 1~2 scripts are helpful, Level 4 is a private version that took me far more efforts to develop. Level 5 : indicator/strategy that do not disclose source code. private version of Level 3 script with my accumulated script processing skills or a large number of custom functions. I had a private function library built in past two years. Level 5 scripts use many of them to achieve private trading strategy.
אינדיקטור Pine Script®
מאת ‎blackcat1402‎
1
Triple EMA Scalper low lag stratHi all, This strategy is based on the Amazing scalper for majors with risk management by SoftKill21 The change is in lines 11-20 where the sma's are replaced with Triple ema's to lower the lag. The original author is SoftKill21. His explanation is repeated below: Best suited for 1M time frame and majors currency pairs. Note that I tried it at 3M time frame. Its made of : Ema ( exponential moving average ) , long period 25 Ema ( exponential moving average ) Predictive, long period 50, Ema ( exponential moving average ) Predictive, long period 100 Risk management , risking % of equity per trade using stop loss and take profits levels. Long Entry: When the Ema 25 cross up through the 50 Ema and 100 EMA . and we are in london or new york session( very important the session, imagine if we have only american or european currencies, its best to test it) Short Entry: When the Ema 25 cross down through the 50 Ema and 100 EMA , and we are in london or new york session( very important the session, imagine if we have only american or european currencies, its best to test it) Exit: TargetPrice: 5-10 pips Stop loss: 9-12 pips
אסטרטגיית Pine Script®
מאת ‎capam‎
3
TST Signals & AlertsThis is an unofficial script for strategies tested on Trading Strategy Testing Youtube channel. Over time, most successful strategies will be added with an option to set strategy-specific alerts . TST Signals & Alerts will draw signals on the chart when the entry conditions are met. You can also opt for displaying indicators . My script is meant for beginners but can be used by veterans too. Just pick one or two strategies, you don't want to flood your chart with conflicting signals. You may want to support your trades with a proper analysis. Is the market trending? Is there a fundament around the corner? If a new signal occurs when there is still an open position, you are not supposed to take another. The current version includes MACD and ADX + BB and BB strategies. MACD strategy: ►Buy, when MACD crosses below the signal line when it is negative. The price must also be above 200 EMA. ►Sell, when MACD crosses above the signal line when it is positive. The price must also be below 200 EMA. ►This strategy was tested on 15-minute charts of EURUSD with reward-to-risk ratio 1,5 and win rate of 61% over 100 trades. ►►►MACD has to be added to your chart separately because it needs a new window. Ticking display indicators will not add MACD to your chart. ►►►MACD was also tested by a different channel I made a script for. You can view the results and the script here: ADX + BB strategy: ►Buy, when the price is above 200 EMA and ADX becomes higher than 25. ►Sell, when the price is below 200 EMA and ADX becomes higher than 25. ►Stop-loss is either 200 EMA or Bollinger Bands level. Check the channel for more information. ►This strategy was tested on 5-minute charts of EURUSD, USDJPY, AUDUSD with reward-to-risk ratio 1,2 and win rate of 56% over 100 trades in total. BB strategy: ►Buy, when the price is above 200 EMA and candle's low is below the lower Bollinger Band. ►Sell, when the price is below 200 EMA and candle's high is above the upper Bollinger Band. ►This strategy was tested on 15-minute charts of EURUSD with reward-to-risk ratio 1,5 and win rate of 52% over 100 trades in total. ►►►Due to the relatively low win rate of this strategy, you need to filter out potentially harmful signals with a proper analysis. Bear in mind that backtesting performance doesn't guarantee future profitability. • Most systematic strategies are not suitable for each timeframe - if you use the different timeframe than the one it was tested on, the result can differ significantly. • You should perform your own backtest to base your trades on more data & to establish confidence in the selected strategy. • This script is not a replacement for proper analysis. New strategies will be added when I have time. If I see multiple people asking for the same feature, I might agree to release it with a new version. I am not going to add input options in this script, it could come as a separate script though. I am in no way affiliated with the Youtube channel, so if you find the script helpful, shot me a message or send me some TradingView coins >) If you encounter any bug, you can report it in a message or in comments. Support it with screenshot and relevant information such as a time when it occurred and what options were on etc.
אינדיקטור Pine Script®
מאת ‎OrcChieftain‎
8
Amazing scalper for majors with risk managementHello, Today I am glad to bring you an amazing simple and efficient scalper strategy. Best suited for 1M time frame and majors currency pairs. Its made of : Ema (exponential moving average) , long period 25 Ema(exponential moving average) Predictive, long period 50, Ema(exponential moving average) Predictive, long period 100 Risk management , risking % of equity per trade using stop loss and take profits levels. Long Entry: When the Ema 25 cross up through the 50 Ema and 100 EMA. and we are in london or new york session( very important the session, imagine if we have only american or european currencies, its best to test it) Short Entry: When the Ema 25 cross down through the 50 Ema and 100 EMA, and we are in london or new york session( very important the session, imagine if we have only american or european currencies, its best to test it) Exit: TargetPrice: 5-10 pips Stop loss: 9-12 pips Hope you enjoy it :)
אסטרטגיית Pine Script®
מאת ‎SoftKill21‎
2
Percentile Nearest Rank Using Arrays [LuxAlgo]The new array feature is extremely powerful, as it will allow pinescript users to do more complex things, or compute existing calculations more efficiently, it will also be possible to shine some light to some already existing functions, one of them being percentile_nearest_rank . We have been working on this new feature with our pal alexgrover, and made this script which computes a rolling percentile using the nearest rank method. Settings Length: Window of the rolling percentile, determine the number of past data to be used. Percentage: Return the current value if Percentage % of the data fall below that value, the setting is in a range (0,100). Src: Input source of the indicator. Usage A rolling percentile can have many usages when it comes to technical analysis, this is due to its ability to return the value of three common rolling statistics, the rolling median, which can be obtained using a percentage equal to 50, the rolling maximum, obtained with a percentage equal to 100, and the rolling minimum, obtained with a percentage equal to 0. When we use our rolling percentile as a rolling median, we can obtain a robust estimation of the underlying trend in the price, while using it as a rolling maximum/minimum can allow us to determine if the market is trending, and at which direction. The rolling maximum/minimum is a rolling statistic used to calculate the well known stochastic oscillator and Donchian channel indicator. We can also compute rolling quartiles, which can be obtained using a percentage of 25 or 75, with one of 25 returning the lower quartile and 75 the upper quartile. In blue the upper rolling quartile (%75), in orange the lower rolling quartile (%25), both using a window size of 100. Details In order to compute a rolling percentile nearest rank, we must first take the most recent length closing prices, then order them in ascending order, we then return the value of the ordered observations at index (percentage/100*length) - 1 (we use - 1 because our array index starts at 0).
אינדיקטור Pine Script®
מאת ‎LuxAlgo‎
13
3 Leg Short Strangle BandsDraws 3 leg bands along with safe zone(green lines) based on input 1) Input ATR, Week Day, Current Market Close 2) Input ATR - Previous day 1H Max ATR 3) ADX < 25 4) Input Current Market Close 5) Trading Day - Mon/Tue/Wed/Thu/Fri - Bands distance calculated based on day M/Tu/F 2*(Max ATR), W/Th 1.5(ATR) 6) Safe zone green lines - CMPCls +/- (1.5 * Max ATR) 7) Leg 1 Upper Lower Legs - M/Tu/F - CMPCls +/-(2 * Max ATR), W/Th - CMPCls +/-(1.5 * ATR) 8) Leg 2 & 3 Calculates based on Leg 2 = Leg 1 +/- 100 pts distance, Leg 3 = Leg 2 +/- 100 pts distance' 9) All figures rounded to nearest 100's 10) Safe zone broken exit all positions This is a popular technic used by Profitable traders on sideway markets for Intraday One can keep 3K as SL per 1 set of 3 legs for better R:R
אינדיקטור Pine Script®
מאת ‎SharemarketRaja‎
5
HeatbandsWhat you see is the 100 day moving average (blue line in the middle) with percentage bands attached to it. Each color has a 5% range. The brightest green color is 20%-25% below the 100 day moving average. The brightest red color is 20%-25% above the 100 day moving average. The behaviour of the stock price between the bands could give you trading ideas. The moving average length is adjustable. The range between the bands is not adjustable (maybe in future updates). Enjoy:)
אינדיקטור Pine Script®
מאת ‎tucomprend‎
Spread for VSAЭтот индикатор сравнивает спрэд (расстояние от закрытия предыдущего бара до закрытия текущего бара или индикатор Momentum = 1) на периоде для сравнения. На графике за 100 % принимается среднее значение спрэда за период для сравнения - красная линия. (по умолчанию период сравнения равен 3 - то есть три последних бара) Размер бара на графике равен текущему спрэду по отношению к 100 %. Если бар меньше 100 % то он ниже среднего, и наоборот если больше 100% то он больше среднего. Если бар красный - спрэд отрицательный (текущее закрытие меньше предыдущего закрытия) Если бар зелёный - спрэд положительный (текущее закрытие больше предыдущего закрытия) Если бар меньше 75% то он будет окрашен в тусклый цвет (этот процент можно менять в настройках) Если в настройках период спрэда указать больше 1, например 2, то спрэд будет равен закрытие мину закрытие через 1 бар назад. (это для экспериментов). Примечание: по умолчанию период для сравнения равен 3, но также интересен график и при значениях 15 и больше. Экспериментируйте. По вопросам и предложениям пишите в комментариях. Automatic translation google translate. This indicator compares the spread (the distance from the closing of the previous bar to the closing of the current bar or the Momentum indicator = 1) on the period for comparison. On the chart, the average spread value for the period for comparison is the red line, taken as 100%. (by default, the comparison period is 3 - that is, the last three bars) The size of the bar on the chart is equal to the current spread with respect to 100%. If the bar is less than 100%, then it is below average, and vice versa, if more than 100%, then it is more than average. If the bar is red, the spread is negative (the current close is less than the previous close) If the bar is green, the spread is positive (the current close is greater than the previous close) If the bar is less than 75%, then it will be painted in a dull color (this percentage can be changed in the settings) If in the settings the period of the spread is specified more than 1, for example 2, then the spread will be equal to closing mine closing after 1 bar back. (this is for experimentation). Note: the default period for comparison is 3, but the chart is also interesting for values ​​of 15 or more. Experiment. For questions and suggestions, write in the comments.
אינדיקטור Pine Script®
מאת ‎Alex_Dyuk‎
[LunaOwl] 強度指數 (Num-Day Strength Index, NDSI)The Num-Day Strength Index was published by Mr.George Angel. low percentage represent bear, high percentage represent bull, and the 50 level is a watershed. In fact, you should adjust the length according to the market, timeframe and trading day. the default is 100 universal. 原本Num-Day Strength Index是指N日內的強度指數，由喬治安傑爾先生提出，可以衡量市場強度，根據50水平線區分多空，事實上，您應該根據自己所在的市場、時框以及每週交易日調整參數。預設值是100。 --------------------------* Formula - 公式 NDSI = ( last close - lowest since period x ) * 100 / ( highest since period x - lowest since period ) --------------------------* Indicator Style - 指標樣式 Take a simple and bright style at a glance. 簡潔的風格，一目了然。 --------------------------* Market Example - 市場範例 1. TAIEX , Taiwan SE Weighted Index, 4 hour 2. EUR/USD , Forex Market, 1 hour 3. S&P 500 E-mini futures, 15 min
אינדיקטור Pine Script®
מאת ‎LunaOwl‎
14
LUBEThis is a chart meant for 30m BTCUSD but could be used for many other assets, and there are inputs to play with. I decided on the strange title "LUBE" because I was measuring how many of the previous 500 bars had the current price level already been in. I wanted to discover when the price was in a new zone or an area that it hadn't spent much time in recently... the LUBE zone. Think of the blue line as showing you the current level friction. If the blue line is high, price is quagmired and not moving quickly. Price could trend sideways for a while before breaking out. A high blue line is a high traffic zone for trading. When the blue line dips low, it's encountering a price zone the asset has not been observed in recently, and this could mean price could break out and move more freely and quickly when it does. We get a trade entry signal if the blue line dips below the bottom white line. The bottom white line is currently set to -10. Think about the lowest the blue line has been recently as 0, and the highest as 100. It is set by default (for BTCUSD 30m chart) to -10 meaning the blue line has to dip a little (-10%) below the lowest it has experienced recently to initiate a trade. This is the LUBE zone. The bottom white line shows that level. Again this is a level lower than the lowest amount of friction experienced in price action for the last 100 bars, but offset by 5 bars showing where that level was at 5 bars ago. We want to dip below that to initiate a trade. The direction to trade in is determined by a very quick moving weighted moving average (variable name is "fir") to see if the recent trend is up or down. To end a trade, an arbitrary number between 0 and 100 is picked telling us when we are experiencing enough friction again to end the trade. I have it preset to 50 (think of it as 50/100 or half way between the white bars. At a 50% friction level it's time to get out of the trade. Some shortcomings are missing the bulk of big moves, and experiencing whipsaws where price action zips up and then comes straight back down. Overall the backtest looks sweet enough to use on 2x leverage, experiencing a 17.78% max drawdown at the time of publishing. I wouldn't push the leverage any higher. To get alerts change the word "strategy" to "study" and delete lines 60-67. Bot traders using alerts: beware the alert conditions. If a trade goes directly from long to short (which happens rarely), without closing a trade first, it might not act properly. If you use bots to trade, for "LONG" please close any old trades first before putting in instructions to open a leveraged long. To go "SHORT" please remember to close any old trade first as well, and things *should* work out just fine. Good luck, have fun, and feel free to mess up and butcher this code to your own liking. I'm not responsible if anything bad that happens to you if you use this trading system, or for any bugs you may encounter.
אסטרטגיית Pine Script®
מאת ‎Jomy‎
26
IKAKOver2（LITE雲なし） change point I tried to make the operation lighter by removing the display of the Ichimoku balance table. We have set a period such as EMA to use 5 minute bars and the first band is period 60 and 100 EMA . The color of the belt changes according to the position of the period 5EMA-25EMA-50EMA. The second sash is based on a 60- and 100-EMA period of 15 minutes. The change in the color of the obi is also a 15-minute specification. Since the above period can be changed, I think that there are customs such as 1 hour and 4 hours. Buying and selling signs are shown in green for buying and red for selling. (More frequent) For the time being, it is also possible to display the Ichimoku balance table. As for my usage method, when both the 15-minute and 5-minute bars have an uptrend (downtrend ), when each trading sign is confirmed, spread the limit just below the price. . (Because there is a commission in the market) If the color of the obi becomes yellow, the trend may be over, so wait for the signature to reach the bundle of 15 minutes instead of 5 minutes, and after the signature is confirmed, it is the same as 5 minutes. The loss cut line is often the latest low. Or when the obi is broken. . I am still studying about profitability. Sometimes we use indicators, sometimes we reach the target horizon. I think each way is good. It is a discretionary aid, and the head and tail are cut off, and the image is about 10 to 100 ＄.
אינדיקטור Pine Script®
מאת ‎nanja600‎
1
IKAKOver2change point Improve the accuracy of reverse sign Adding a signature using only RCI 変更点 逆張りのサインと順張りのサインを区別し、逆張りのサインは騙しができるだけ少なくなるように精度を上げました。 逆張りか順張りかは10emaと100emaの位置関係だけで区別しています。 また、RCIのみを利用した、レンジ相場用のサインを追加しました。 We have set a period such as EMA to use 5 minute bars and the first band is period 60 and 100 EMA . The color of the belt changes according to the position of the period 5EMA-25EMA-50EMA. The second sash is based on a 60- and 100-EMA period of 15 minutes. The change in the color of the obi is also a 15-minute specification. Since the above period can be changed, I think that there are customs such as 1 hour and 4 hours. Buying and selling signs are shown in green for buying and red for selling. (More frequent) For the time being, it is also possible to display the Ichimoku balance table. As for my usage method, when both the 15-minute and 5-minute bars have an uptrend (downtrend ), when each trading sign is confirmed, spread the limit just below the price. . (Because there is a commission in the market) If the color of the obi becomes yellow, the trend may be over, so wait for the signature to reach the bundle of 15 minutes instead of 5 minutes, and after the signature is confirmed, it is the same as 5 minutes. The loss cut line is often the latest low. Or when the obi is broken. . I am still studying about profitability. Sometimes we use indicators, sometimes we reach the target horizon. I think each way is good. It is a discretionary aid, and the head and tail are cut off, and the image is about 10 to 100 ＄.
אינדיקטור Pine Script®
מאת ‎nanja600‎
3
IKAKOWe have set a period such as EMA to use 5 minute bars and the first band is period 60 and 100 EMA. The color of the belt changes according to the position of the period 5EMA-25EMA-50EMA. The second sash is based on a 60- and 100-EMA period of 15 minutes. The change in the color of the obi is also a 15-minute specification. Since the above period can be changed, I think that there are customs such as 1 hour and 4 hours. Buying and selling signs are shown in green for buying and red for selling. (More frequent) For the time being, it is also possible to display the Ichimoku balance table. As for my usage method, when both the 15-minute and 5-minute bars have an uptrend (downtrend ), when each trading sign is confirmed, spread the limit just below the price. . (Because there is a commission in the market) If the color of the obi becomes yellow, the trend may be over, so wait for the signature to reach the bundle of 15 minutes instead of 5 minutes, and after the signature is confirmed, it is the same as 5 minutes. The loss cut line is often the latest low. Or when the obi is broken. . I am still studying about profitability. Sometimes we use indicators, sometimes we reach the target horizon. I think each way is good. It is a discretionary aid, and the head and tail are cut off, and the image is about 10 to 100 ＄.
אינדיקטור Pine Script®
מאת ‎nanja600‎
Point and Figure (PnF) ChartThis is live and non-repainting Point and Figure Charting tool. The tool has it’s own P&F engine and not using integrated function of Trading View. Point and Figure method is over 150 years old. It consist of columns that represent filtered price movements. Time is not a factor on P&F chart but as you can see with this script P&F chart created on time chart. P&F chart provide several advantages, some of them are filtering insignificant price movements and noise, focusing on important price movements and making support/resistance levels much easier to identify. If you are new to Point & Figure Chart then you better get some information about it before using this tool. There are very good web sites and books. Please PM me if you need help about resources. Options in the Script Box size is one of the most important part of Point and Figure Charting. Chart price movement sensitivity is determined by the Point and Figure scale. Large box sizes see little movement across a specific price region, small box sizes see greater price movement on P&F chart. There are four different box scaling with this tool: Traditional, Percentage, Dynamic (ATR), or User-Defined 4 different methods for Box size can be used in this tool. User Defined: The box size is set by user. A larger box size will result in more filtered price movements and fewer reversals. A smaller box size will result in less filtered price movements and more reversals. ATR: Box size is dynamically calculated by using ATR, default period is 20. Percentage: uses box sizes that are a fixed percentage of the stock's price. If percentage is 1 and stock’s price is $100 then box size will be $1 Traditional: uses a predefined table of price ranges to determine what the box size should be. Price Range Box Size Under 0.25 0.0625 0.25 to 1.00 0.125 1.00 to 5.00 0.25 5.00 to 20.00 0.50 20.00 to 100 1.0 100 to 200 2.0 200 to 500 4.0 500 to 1000 5.0 1000 to 25000 50.0 25000 and up 500.0 Default value is “ATR”, you may use one of these scaling method that suits your trading strategy. If ATR or Percentage is chosen then there is rounding algorithm according to mintick value of the security. For example if mintick value is 0.001 and box size (ATR/Percentage) is 0.00124 then box size becomes 0.001. And also while using dynamic box size (ATR or Percentage), box size changes only when closing price changed. Reversal : It is the number of boxes required to change from a column of Xs to a column of Os or from a column of Os to a column of Xs. Default value is 3 (most used). For example if you choose reversal = 2 then you get the chart similar to Renko chart. Source: Closing price or High-Low prices can be chosen as data source for P&F charting. Chart Style: There are 3 options for chart style: “Candle”, “Area” or “Don’t show”. As Area: As Candle: X/O Column Style: it can show all columns from opening price or only last Xs/Os. Color Theme: different themes exist => Green/Red, Yellow/Blue, White/Yellow, Orange/Blue, Lime/Red, Blue/Red Show Breakouts is the option to show Breakouts This tool detects & shows following Breakouts: Triple Top/Bottom, Triple Top Ascending, Triple Bottom Descending, Simple Buy/Sell (Double Top/Bottom), Simple Buy With Rising Bottom, Simple Sell With Declining Top Catapult bullish/bearish Show Horizontal Count Targets: Finds the congestion or consolidation pattern and if there is breakout then it calculates the Target by using Horizontal Count method (based on the width of congestion pattern). It shows how many column exist on congestion area. There is no guarantee that prices will reach the target. Show Vertical Count Targets: When Triple Top/Bottom Breakouts occured the script calculates the target by using Vertical Count Method (based on the length of the column). There is no guarantee that prices will reach the target. For both methods there is auto target cancellation if price goes below congestion bottom or above congestion top. trend is calculated by EMA of closing price of the P&F Whipsaw protection: Last options are “Show info panel” and Labeling Offset. Script shows current box size, reversal, and recommanded minimum and maximum box size. And also it shows the price level to reverse the column (Xs <-> Os) and the price level to add at least 1 more box to column. This is the option to put these labels 10, 20, 30, 50 or 100 bars away from the last bar. Labeling content and color change according to X/O column. do not hesitate to comment.
אינדיקטור Pine Script®
מאת ‎LonesomeTheBlue‎
65