התחל

חפש סקריפטים עבור "机械革命无界15+时不时闪屏"

Fractal Resonance BarLazyBear's WaveTrend port has been praised for highlighting trend reversals with precision and punctuality (minimal lag). But strong "3rd Wave" trends can "embed" or saturate any oscillator flashing several premature crosses while stuck overbought/oversold. This happens when the trend stretches over a longer timescale than the oscillator's averaging window or filter time constant. Our solution: monitor many timescales. With Fractal Resonance Bar's rich color codings, strong wavefronts form across timescales and jump out like an approaching line of thunderclouds! Fractal Resonance Bar color-codes the status of eight underlying stochastic oscillators, with each row averaging over twice the time of the row above. Fractal Resonance Bar shifts its timescales along with your choice of main chart timescale: 1 minute chart: 1 minute through 128 minute (~2 hour) oscillators. 15 minute chart: 15 minute through 1920 minute (~32 hour) oscillators. 1 hour chart: 1 hour through 128 hour (~2 week) oscillators. Daily chart: 1 day through 128 day (~4 month) oscillators. The color map is configured as follows: Hot Pink: Extreme Overbought (> 100%) rolled over to sell, but oscillators probably embedded with more upside (revert to Dark Green) possible after a pause. Deep Red: Overbought (> 75%) crossover ripe for selling (validated when red spreads to timescales below). Brown: Minor (< 75%) crossover sell from which could bounce back green or start a plunge toward gray/black. Gray/Black: Mature (< -75%) sells turning full black in a plunge before the dawn. Lime Green: Extreme Oversold (< -100%) and bouncing, though may yet bottom even lower. Green: Oversold (< -75%) crossover ripe for buy. Green spreading to all timescales below will validate bottom is in. Dark Green/Teal: Mature buy in overbought (> 75%) range, waiting for sell crossover to Hot Pink for a pause or correction. White Stripes are Impulsive Trend Warning Fractal Resonance Bar warns of oscillator embedding by showing white stripes when it detects strong, early surges in the timescale rows below.The white stripes usually accompany Hot Pink warning it's too early to go short, or Lime Green warning it's too early to go long. Heeding these warnings will probably miss the exact top or bottom, but you're less likely to get overrun in a momentum move. Usually the market gives us a second opportunity to short very close to the top or buy very close to the bottom after the warning white stripes have subsided. NOTE: Recently rolled over Futures contracts may not have enough history for all oscillator calculations, in which case no bar colors will appear. Tweakable Attributes The default Channel Length, Stochastic Ratio Length and Lag Length work reasonably well on all timescales in our experience. Minor tweaks don't hurt but this may just overfit to a particular chart history. We don't recommend changing the 75% Overbought and 100% Extreme Overbought default levels as these are ideal numbers relative to the underlying oscillator statistic calculations. But these settings can shift the color transition levels. Embedded attribute controls the sensitivity/conservativeness of the white strip embedding detectors. Closer to 75 increases the warning sensitivity while closer to 100 decreases the aggressiveness of blocking white stripes. Embed Separation also affects the white stripe sensitivity. Row width increases each row's thickness to fill the available screen height you've afforded the bar.
אינדיקטור Pine Script®
מאת ‎pythagoras‎
12
extended session - Regular Opening-Range- JayyOpening Range and some other scripts updated to plot correctly (see comments below.) There are three variations of the fibonacci expansion beyond the opening range and retracements within the opening range of the US Market session - I have not put in the script for the other markets yet. The three scripts have different uses and strengths: The extended session script (with the script here below) will plot the opening range whether you are using the extended session or the regular session. (that is to say whether "ext" in the lower right hand corner is highlighted or not.). While in the extended session the opening range has some plotting issues with periods like 13 minutes or any period that is not divisible into 330 mins with a round number outcome (eg 330/60 =5.5. Therefore an hour long opening range has problems in the extended session. The pre session script is only for the premarket. You can select any opening range period you like. I have set the opening range to be the full premarket session. If you select a different session you will have to unselect "pre open to 9:30 EST for Opening Range?" in the format section. The script defaults to 15 minutes in the "period Of Pre Opening Range?". To go back to the 4 am to 9:30 pre opening range select "pre open to 9:30 EST for Opening Range?" there is no automatic 330 minute selection. The past days offset script only works in 5 min or 15 minute period. It will show the opening range from up to 20 days past over the current days price action. Use this for the regular session only. 0 shows the current day's opening range. Use the positive integers for number of days back ie 1, 2, 3 etc not -1, -2, -3 etc. The script is preprogrammed to use the current day (0). Scripts updated to plot correctly: One thing they all have in common is a way of they deal with a somewhat random problem that shifts the plots 4 hours in one direction or the other ie the plot started at 9:30 EST or 1:30PM EST. This issue started to occur approximately June 22, 2015 and impacts any script that tried to use "session" times to manage a plot in my scripts. The issue now seems to have been resolved during this past week. Just in case the problem reoccurs I have added a "Switch session plot?" to each script. If the plot looks funny check or uncheck the "Switch session plot?" and see the difference. Of course if a new issue crops up it will likely require a different fix. I have updated all of the scripts shown on this chart. If you are using a script of mine that suffers from the compiler issue then you will find an update on this chart. You can get any and all of the scripts by clicking on the small sideways wishbone on the left middle of the chart. You will see a dialogue box. Then click "make it mine". This will import all of the scripts to your computer and you can play around with them all to decide what you want and what you don't want. This is the easiest way to get all of the scripts in one fell swoop. It is also the easiest way for me to make all of the scripts available. I do not have all of the plots visible since it is too messy and one of the scripts (pre OR) is only for the regular session. To view the scripts click on the blue eye to the right of the script title to show it on this script. If you can only use the regular session. The scripts will all (with the exception of the pre OR) work fine. If for any reason this script seems flakey refresh the page r try a slightly different period. I have noticed that sometimes randomly the script loves to return to the 5 min OR. This is a very new issue transient issue. As always if you see an issue please let me know. Cheers Jayy
אינדיקטור Pine Script®
מאת ‎jayy‎
1
BB 100 with Barcolors6/19/15 I added confirmation highlight bars to the code. In other words, if a candle bounced off the lower Bollinger band, it needed one more close above the previous candle to confirm a higher probability that a change in investor sentiment has reversed. Same is true for upper Bollinger band bounces. I also added confirmation highlight bars to the 100 sma (the basis). The idea is that lower and upper bands are potential points of support and resistance. The same is true of the basis if a trend is to continue. 6/28/15 I added a plotshape to identify closes above/below TLine. One thing this system points out is it operates best in a trend reversal. Consolidations will whipsaw the indicator too much. I have found that when this happens, if using daily candles, switch to hourly, 30 min, etc., to catch a better signal. Nothing moves in a straight line. As with any indicator, it is a tool to be used in conjunction with the art AND science of trading. As always, try the indicator for a time so that you are comfortable enough to use real money. This is designed to be used with "BB 25 with Barcolors".
אינדיקטור Pine Script®
מאת ‎rmwaddelljr‎
BB 25 with Barcolors6/19/15 I added confirmation highlight bars to the code. In other words, if a candle bounced off the lower Bollinger band, it needed one more close above the previous candle to confirm a higher probability that a change in investor sentiment has reversed. Same is true for upper Bollinger band bounces. I also added confirmation highlight bars to the 100 sma (the basis). The idea is that lower and upper bands are potential points of support and resistance. The same is true of the basis if a trend is to continue. 6/28/15 I added a plotshape to identify closes above/below TLine. One thing this system points out is it operates best in a trend reversal. Consolidations will whipsaw the indicator too much. I have found that when this happens, if using daily candles, switch to hourly, 30 min, etc., to catch a better signal. Nothing moves in a straight line. As with any indicator, it is a tool to be used in conjunction with the art AND science of trading. As always, try the indicator for a time so that you are comfortable enough to use real money. This is designed to be used with "BB 100 with Barcolors".
אינדיקטור Pine Script®
מאת ‎rmwaddelljr‎
1
KK_Intraday MAsHey guys, today I was browsing through intraday Charts looking at some moving averages. Basically what I wanted to see was whether the currency pair was trading below or above the moving average of the day/week/month. For a better understanding: The daily MA on a 15 minute Forex Chart would be the 96 MA. I encountered the problem that i always had to change the settings for my MAs when changing the Time Interval, so I coded this here up. It is pretty simple but maybe somebody else has the same problem and can put it to use. The script has some settings as listed below: Choice which MAs to plot, (Daily, Weekly, Monthly) Choice which type of MA to use (Simple, Exponential, Weighted) Neccesary Settings for the correct calculation (e.g. Number of trading hours per day). These settings depend on the instrument you are using and should always be checked before using this script. There are a few things to Note when using this script: This script works for intraday charts only. The monthly MA doesn't work on any Time Interval smaller than 15 minutes. Can't do anything about it unfortunately. This is my first published Script, use it with caution and let me know what you think about it!
אינדיקטור Pine Script®
מאת ‎Kurbelklaus‎
2
Opening Range Breakout with 2 Profit Targets.Opening Range Breakout with 2 Profit Targets. Updated Indicator now works on all Symbols with Many Different Session Options. ***Known PineScript Issue…While the Opening Range is being Formed the lines only adjust for that individual bar. Just reset Indicator after Opening Range Completes. ***All Times are Based on New York Time Session Options Forex U.S. Banks Open (8:00), Gold U.S. Open (8:20), Oil U.S. Open (9:00), U.S. Cash Session - Stocks (9:30), NY Forex Open (17:00) , Europe Open (02:00), or if you choose Setting 0 the Session Runs from 00:00 to 00:00 (Midnight to Midnight). ***Ability to use 60 minute Opening Range, 30 minute, 15 minute, and many other options. ***However you can manually change the times in the Inputs Tab to adjust for any session you prefer. This is useful for Day Light Savings Adjustments. Also the default times work if your charts are set to EST Time. If you use A different time zone in your settings you need to Adjust the times in the inputs tab. Initially Opening Range High and Low plot as Yellow Lines. If Price Goes Above Opening Range then Line Turns Green. If Price Goes Below Opening Range Line Turns Red. By default the First Profit Target is 1/2 the Width of the Opening Range and the 2nd Profit Target is 1 Times the Opening Range. However these are Adjustable in the Inputs Tab. By Default the Opening Range Length is 1 Hour. However, you can Change the Opening Range Length to 15 min, 30 min, 2 hours etc. in the Inputs Tab. Plots a 1 Above or Below Candle when 1st Profit Target is Achieved, and a 2 when 2nd Profit Target is Achieved.
אינדיקטור Pine Script®
מאת ‎ChrisMoody‎
91
Indicator: Trend Trigger FactorIntroduced by M.H.Pee, Trend Trigger Factor is designed to keep the trader trading with the trend. System rules according to the developer: * If the 15-day TTF is above 100 (indicating an uptrend), you will want to be in long positions. * If the 15-day TTF is below -100, you will want to be short. * If it is between -100 and 100, you should remain with the current position. More info: Original Article by Mr.Pee: drive.google.com
אינדיקטור Pine Script®
מאת ‎LazyBear‎
15
Trendline MTF Optimized1️⃣ What the Script Does The script automatically draws trendlines connecting pivot highs and lows for multiple timeframes on your chart. Pivot highs → connect recent tops Pivot lows → connect recent bottoms It also shows a legend so you can see which line belongs to which timeframe. Why it’s useful: Helps spot trend direction across multiple timeframes at a glance. Highlights support and resistance levels automatically. Useful for scalpers, swing traders, and multi-timeframe analysis. 2️⃣ Inputs the User Can Adjust Input What it Means for the User Pivot Left Bars How many bars to the left the script checks to confirm a pivot. More bars → stronger pivot, slower reaction. Pivot Right Bars How many bars to the right it checks. Similar effect as left bars. Show Debug Pivot Labels Shows the exact pivot values on the chart. Good for learning or checking accuracy. Show Legend Shows the small table with line symbols and timeframes. Helps you quickly know which line belongs to which timeframe. 3️⃣ Timeframes The script automatically calculates pivot points for multiple timeframes: 1 min, 3 min, 5 min, 15 min, 30 min, 1 hour, 4 hours, 1 day Each timeframe gets its own color and line thickness. This helps distinguish them visually. 4️⃣ How Trendlines Are Drawn Pivot Highs (Red lines): Connects the previous top to the most recent top on that timeframe. Pivot Lows (Green lines): Connects the previous bottom to the most recent bottom. If there’s no previous pivot yet, it just starts the line at the first pivot detected. Optional debug labels show the price and timeframe of each pivot. User Benefit: You can instantly see short-term and long-term trendlines without manual drawing. 5️⃣ Legend Table Shows which line corresponds to which timeframe. Uses small bar symbols (▁▁▁▁▁, ▂▂▂▂▂, etc.) to match line thickness. Placed at the top-right corner by default. User Benefit: Even if the chart is cluttered, you always know which line represents which timeframe. 6️⃣ How a User Reads It on the Chart Red line going down → recent highs are decreasing → short-term downtrend. Green line going up → recent lows are increasing → short-term uptrend. Multiple lines of different thickness/colors → different timeframes. Crossovers of lines or areas where green and red lines converge → potential support/resistance zones. 7️⃣ User Actionable Tips Adjust left/right bars for sensitivity: Lower bars → trendlines react faster (good for scalping). Higher bars → trendlines smoother (good for swing trades). Use debug labels initially to see pivot points. Check legend to quickly identify which line belongs to which timeframe. Combine trendlines with other indicators (like RSI, ADX) for better signals. ✅ Summary for Users “This script automatically draws support/resistance trendlines across multiple timeframes, labels pivots optionally, and shows a legend so you know which line belongs to which timeframe. Adjust pivot sensitivity to match your trading style.”
אינדיקטור Pine Script®
מאת ‎Just-a-Trader‎
NY Session Divisions⭐NY Session Divisions - Professional Trading Session Manager NY Session Divisions is an advanced trading indicator that professionally segments the New York trading day into precise sessions, providing institutional-grade market structure analysis with smart breakout detection and comprehensive filtering systems. ✨ KEY FEATURES 🕒 8 Professional Trading Sessions - US Overnight Range (03:30-11:50) - NY Pre-Open (16:45-17:00) - NY First Session ORB (17:00-17:15) - Premarket Range - Recommended by Mahdi Salari* - NY Midday Range - NY 2nd Pre-Open - 2nd Session ORB - US After Hours ORB 🎯 Advanced Trading Strategies - School Run Strategy (SRS) by Tom Hougaard - Breakout-focused approach - Anti-SRS Strategy - Range-trading methodology - Dual Strategy System - Combine breakout and range trading for maximum flexibility 🔔 Smart Alert System - Multi-timeframe confirmation - Heiken Ashi candle validation - Customizable alert conditions - Sound notifications with detailed messages - Post-close confirmation to avoid false signals 🛡️ Professional Filter Stack - Ichimoku Baseline - Divergence Detection - Advanced market analysis - EMA 200 Filter - Trend alignment - Ichimoku Baseline - Market structure - ATR Filter - Volatility validation - RSI Filter - Momentum confirmation 🎨 Advanced Visualization - Clean session range displays - Professional Heiken Ashi candles - Smart breakout markers (Small/Tiny for signal strength) - Take Profit lines with ATR-based calculations - Customizable colors and opacity 🏆 WHY TRADERS LOVE THIS INDICATOR ✅ For Breakout Traders - Precise session boundary detection - Clean breakout signals with confirmation - Multiple filter validation ✅ For Range Traders - Clear session range identification - Anti-SRS strategy for range-bound markets - Support/Resistance level tracking ✅ For Professional Traders - Institutional-grade session management - Comprehensive filtering system - Multi-timeframe analysis - Customizable risk management ⚡ QUICK START GUIDE Basic Setup (2 Minutes) 1. Enable Sessions** - Choose 1-2 sessions to start 2. Set Alerts - Configure your preferred notification method 3. Apply Filters - Enable EMA 200 and Ichimoku for starters Advanced Configuration - Combine SRS + Anti-SRS for comprehensive strategy - Use multiple divergence filters for confirmation - Customize TP lines based on your risk profile - Drawing 1st and 2nd Session Close lines PROFESSIONAL TIPS Session Selection Strategy - Start with Session 1 (US Overnight) for overall market trend identification - Add Session 3 (NY First ORB) for opening momentum - Use Session 4 (Premarket) for the best perfomance of the breakout strategy Filter Optimization - Conservative : EMA 200 + Ichimoku Baseline - Balanced : Add ATR filter for volatility check 0.8 is enough - Aggressive : Enable all filters for maximum confirmation but the number of signal and performance will decrease Risk Management - Use TP lines for automatic profit targets - Combine with proper position sizing - Always use stop losses 🔧 TECHNICAL SPECIFICATIONS - Platform : TradingView Pine Script v6 - Markets : All US trading instruments (ES, NQ, YM, CL, etc.) - Timeframes : 1min to Daily - Auto DST Handling : Yes - Real-time Processing : Yes 📊 PERFORMANCE FEATURES - Zero Repaint - All signals confirmed after candle close - Multi-Timeframe - Works across all chart timeframes - Resource Optimized - Efficient calculation methods - User Customizable - Complete control over all parameters - Consistent Performance - Reliable session-based signals - Professional Grade - Institutional-level analysis tools - Continuous Updates - Regular improvements and enhancements - Community Supported - Active user community and support 🔄 KEEP UPDATED Click the Favorite Star ⭐ to receive update notifications and stay current with new features and improvements! Professional traders don't guess - they analyze. NY Session Divisions gives you the analytical edge. Happy Trading! 📈 Created with precision for serious traders DISCLAIMER This indicator is for educational and informational purposes only. It should not be considered as financial advice. Always practice proper risk management and test strategies in demo accounts before live trading. Past performance does not guarantee future results.
אינדיקטור Pine Script®
מאת ‎MahdiSalari8‎
1
LegendaryGoldTraderLegendaryGoldTrader Signals – TradingView Indicator This script is a comprehensive multi-indicator signal tool for XAUUSD (Gold), optimized for short timeframes from 1 to 15 minutes. It combines trend, momentum, and entry indicators to help identify potential Long and Short trading opportunities. Features: EMA (Trend Filter): Two EMAs determine the short-term trend direction. RSI: Highlights overbought and oversold conditions. MACD: Detects momentum shifts and trend changes. Stochastic: Provides precise entry timing. ADX: Confirms trend strength and filters signals during weak trends. 3-Candle Pattern (optional): Identifies short-term reversal patterns for Long or Short entries. BUY/SELL Labels: Clear signals displayed above or below the chart. Info Window: Displays all indicator signals and trend strength at a glance. Highlights: Fully configurable indicators and signals. 3-Candle Pattern can be enabled or disabled. Suitable for fast intraday trading on minute charts, but flexible for other timeframes. Supports trend confirmation and false-signal filtering for controlled entries.
אינדיקטור Pine Script®
מאת ‎mkproedig‎
Aurum DCX AVE Gold and Silver StrategySummary in one paragraph Aurum DCX AVE is a volatility break strategy for gold and silver on intraday and swing timeframes. It aligns a new Directional Convexity Index with an Adaptive Volatility Envelope and an optional USD/DXY bias so trades appear only when direction quality and expansion agree. It is original because it fuses three pieces rarely combined in one model for metals: a convexity aware trend strength score, a percentile based envelope that widens with regime heat, and an intermarket DXY filter. Scope and intent • Markets. Gold and silver futures or spot, other liquid commodities, major indices • Timeframes. Five minutes to one day. Defaults to 30min for swing pace • Default demo used in this publication. TVC:GOLD on 30m • Purpose. Enter confirmed volatility breaks while muting chop using regime heat and USD bias • Limits. This is a strategy. Orders are simulated on standard candles only Originality and usefulness • Unique fusion. DCX combines DI strength with path efficiency and curvature. AVE blends ATR with a high TR percentile and widens with DCX heat. DXY adds an intermarket bias • Failure mode addressed. False starts inside compression and unconfirmed breakouts during USD swings • Testability. Each component has a named input. Entry names L and S are visible in the list of trades • Portable yardstick. Weekly ATR for stops and R multiples for targets • Open source. Method and implementation are disclosed for community review Method overview in plain language You score direction quality with DCX, size an adaptive envelope with a blend of ATR and a high TR percentile, and only allow breaks that clear the band while DCX is above a heat threshold in the same direction. An optional DXY filter favors long when USD weakens and short when USD strengthens. Orders are bracketed with a Weekly ATR stop and an R multiple target, with optional trailing to the envelope. Base measures • Range basis. True Range and ATR over user windows. A high TR percentile captures expansion tails used by AVE • Return basis. Not required Components • Directional Convexity Index DCX. Measures directional strength with DX, multiplies by path efficiency, blends a curvature term from acceleration, scales to 0 to 100, and uses a rise window • Adaptive Volatility Envelope AVE. Midline ALMA or HMA or EMA plus bands sized by a blend of ATR and a high TR percentile. The blend weight follows volatility of volatility. Band width widens with DCX heat • DXY Bias optional. Daily EMA trend of DXY. Long bias when USD weakens. Short bias when USD strengthens • Risk block. Initial stop equals Weekly ATR times a multiplier. Target equals an R multiple of the initial risk. Optional trailing to AVE band Fusion rule • All gates must pass. DCX above threshold and rising. Directional lead agrees. Price breaks the AVE band in the same direction. DXY bias agrees when enabled Signal rule • Long. Close above AVE upper and DCX above threshold and DCX rising and plus DI leads and DXY bias is bearish • Short. Close below AVE lower and DCX above threshold and DCX falling and minus DI leads and DXY bias is bullish • Exit and flip. Bracket exit at stop or target. Optional trailing to AVE band Inputs with guidance Setup • Symbol. Default TVC:GOLD (Correlation Asset for internal logic) • Signal timeframe. Blank follows the chart • Confirm timeframe. Default 1 day used by the bias block Directional Convexity Index • DCX window. Typical 10 to 21. Higher filters more. Lower reacts earlier • DCX rise bars. Typical 3 to 6. Higher demands continuation • DCX entry threshold. Typical 15 to 35. Higher avoids soft moves • Efficiency floor. Typical 0.02 to 0.06. Stability in quiet tape • Convexity weight 0..1. Typical 0.25 to 0.50. Higher gives curvature more influence Adaptive Volatility Envelope • AVE window. Typical 24 to 48. Higher smooths more • Midline type. ALMA or HMA or EMA per preference • TR percentile 0..100. Typical 75 to 90. Higher favors only strong expansions • Vol of vol reference. Typical 0.05 to 0.30. Controls how much the percentile term weighs against ATR • Base envelope mult. Typical 1.4 to 2.2. Width of bands • Regime adapt 0..1. Typical 0.6 to 0.95. How much DCX heat widens or narrows the bands Intermarket Bias • Use DXY bias. Default ON • DXY timeframe. Default 1 day • DXY trend window. Typical 10 to 50 Risk • Risk percent per trade. Reporting field. Keep live risk near one to two percent • Weekly ATR. Default 14. Basis for stops • Stop ATR weekly mult. Typical 1.5 to 3.0 • Take profit R multiple. Typical 1.5 to 3.0 • Trail with AVE band. Optional. OFF by default Properties visible in this publication • Initial capital. 20000 • Base currency. USD • request.security lookahead off everywhere • Commission. 0.03 percent • Slippage. 5 ticks • Default order size method percent of equity with value 3% of the total capital available • Pyramiding 0 • Process orders on close ON • Bar magnifier ON • Recalculate after order is filled OFF • Calc on every tick OFF Realism and responsible publication • No performance claims. Past results never guarantee future outcomes • Shapes can move while a bar forms and settle on close • Strategies use standard candles for signals and orders only Honest limitations and failure modes • Economic releases and thin liquidity can break assumptions behind the expansion logic • Gap heavy symbols may prefer a longer ATR window • Very quiet regimes can reduce signal contrast. Consider higher DCX thresholds or wider bands • Session time follows the exchange of the chart and can change symbol to symbol • Symbol sensitivity is expected. Use the gates and length inputs to find stable settings Open source reuse and credits • None Mode Public open source. Source is visible and free to reuse within TradingView House Rules Legal Education and research only. Not investment advice. You are responsible for your decisions. Test on historical data and in simulation before any live use. Use realistic costs.
אסטרטגיית Pine Script®
מאת ‎exlux‎
Trend Telescope v4 Basic Configuration pine // Enable only the components you need Order Flow: ON Delta Volume: ON Volume Profile: ON Cumulative Delta: ON Volatility Indicator: ON Momentum Direction: ON Volatility Compression: ON 📊 Component Breakdown 1. Order Flow Analysis Purpose: Identifies buying vs selling pressure Visual: Histogram (Green=Buying, Red=Selling) Calculation: Volume weighted by price position Usage: Spot institutional order blocks 2. Delta Volume Values Purpose: Shows volume imbalance Bull Volume (Green): Volume on up bars Bear Volume (Red): Volume on down bars Usage: Identify volume divergences 3. Anchored Volume Profile Purpose: Finds high-volume price levels POC (Point of Control): Price with highest volume Profile Length: Adjustable (default: 50 bars) Usage: Identify support/resistance zones 4. Cumulative Volume Delta Purpose: Tracks net buying/selling pressure over time Trend Analysis: Rising=Buying pressure, Falling=Selling pressure Divergence Detection: Price vs Delta divergences Usage: Confirm trend strength 5. Volatility Indicator Purpose: Measures market volatility with cycle detection Volatility Ratio: ATR as percentage of price Volatility Cycle: SMA of volatility (identifies periods) Histogram: Difference between current and average volatility Usage: Adjust position sizing, identify breakout setups 6. Real-time Momentum Direction Purpose: Multi-factor momentum assessment Components: Price momentum (50%), RSI momentum (30%), Volume momentum (20%) Visual: Line plot with color coding Labels: Clear BULLISH/BEARISH/NEUTRAL signals Usage: Trend confirmation, reversal detection 7. Volatility Compression Analysis Purpose: Identifies low-volatility consolidation periods Compression Detection: True Range below threshold Strength Meter: How compressed the market is Histogram: Red when compressed, Gray when normal Usage: Predict explosive moves, prepare for breakouts ⚙️ Advanced Configuration Optimal Settings for Different Timeframes pine // Scalping (1-15 min) Profile Length: 20 ATR Period: 10 Momentum Length: 8 Compression Threshold: 0.3 // Day Trading (1H-4H) Profile Length: 50 ATR Period: 14 Momentum Length: 14 Compression Threshold: 0.5 // Swing Trading (Daily) Profile Length: 100 ATR Period: 20 Momentum Length: 21 Compression Threshold: 0.7 Alert Setup Guide Enable "Enable Alerts" in settings Choose alert types: Momentum Alerts: When momentum changes direction Compression Alerts: When volatility compression begins Set alert frequency to "Once Per Bar" Configure notification preferences 🎯 Trading Strategies Strategy 1: Compression Breakout pine Entry Conditions: 1. Volatility Compression shows RED histogram 2. Cumulative Delta trending upward 3. Momentum turns BULLISH 4. Price breaks above POC level Exit: When Momentum turns BEARISH or Compression ends Strategy 2: Momentum Reversal pine Entry Conditions: 1. Strong Order Flow in opposite direction 2. Momentum divergence (price makes new high/low but momentum doesn't) 3. Volume confirms the reversal Exit: When Order Flow returns to trend direction Strategy 3: Institutional Accumulation pine Identification: 1. High Cumulative Delta but flat/sideways price 2. Consistent Order Flow in one direction 3. Volume Profile shows accumulation at specific levels Trade: Enter in direction of Order Flow when price breaks level 📈 Interpretation Guide Bullish Signals ✅ Order Flow consistently green ✅ Cumulative Delta making higher highs ✅ Momentum above zero and rising ✅ Bull Volume > Bear Volume ✅ Price above POC level Bearish Signals ✅ Order Flow consistently red ✅ Cumulative Delta making lower lows ✅ Momentum below zero and falling ✅ Bear Volume > Bull Volume ✅ Price below POC level Caution Signals ⚠️ Momentum divergence (price vs indicator) ⚠️ Volatility compression (potential big move coming) ⚠️ Mixed signals across components 🔧 Troubleshooting Common Issues & Solutions Problem: Indicators not showing Solution: Check "Show on Chart" is enabled Problem: Alerts not triggering Solution: Verify alert is enabled in both script and TradingView alert panel Problem: Performance issues Solution: Reduce number of enabled components or increase timeframe Problem: Volume Profile not updating Solution: Adjust Profile Length setting, ensure sufficient historical data Performance Optimization Disable unused components Increase chart timeframe Reduce historical bar count Use on lower timeframes with fewer indicators enabled 💡 Pro Tips Risk Management Use Volatility Indicator for position sizing Monitor Cumulative Delta for trend confirmation Use POC levels for stop-loss placement Multi-Timeframe Analysis Use higher timeframe for trend direction Use current timeframe for entry timing Correlate signals across timeframes Market Condition Adaptation Trending Markets: Focus on Momentum + Order Flow Ranging Markets: Focus on Volume Profile + Compression High Volatility: Use smaller position sizes Low Volatility: Prepare for compression breakouts 📚 Educational Resources Key Concepts to Master Volume-price relationships Market microstructure Institutional order flow Volatility regimes Momentum vs mean reversion Recommended Learning Path Start with Order Flow + Momentum only Add Volume Profile once comfortable Incorporate Volatility analysis Master multi-component correlation 🆘 Support Getting Help Check component toggles are enabled Verify sufficient historical data is loaded Test on major pairs/indices first Adjust settings for your trading style Continuous Improvement Backtest strategies thoroughly Keep a trading journal Adjust parameters based on market conditions Combine with price action analysis Remember: No indicator is perfect. Use this tool as part of a comprehensive trading plan with proper risk management. Always test strategies in demo accounts before live trading. Happy Trading! 📈
אינדיקטור Pine Script®
מאת ‎lohanineeraj‎
Adaptive Pulse Frequency & Amplitude TrendAdaptive Pulse Frequency & Amplitude Trend Indicator This Pine Script indicator is designed to identify strong bullish or bearish trends by analyzing volume dynamics on a lower timeframe than the one currently displayed on the chart. It operates on the principle of detecting significant spikes in buying or selling pressure, referred to as "pulses," and then evaluating their frequency, strength, and dominance over the opposing market forces. Core Concepts Lower Timeframe Volume Analysis: The script requests up-volume and down-volume data from a more granular, lower timeframe (e.g., 1-minute data when on a 15-minute chart). This provides a higher-resolution view of the flow of buy and sell orders. Adaptive Pulse Detection: A "pulse" is defined as a bar with an unusually high net volume (up volume minus down volume). Instead of using a fixed value, the indicator calculates an adaptive threshold based on the 90th percentile of net volume over a 100-bar lookback period. Any bar with a net volume exceeding this dynamic threshold is flagged as a pulse, categorized as either bullish (positive net volume) or bearish (negative net volume). Frequency and Amplitude: The indicator measures two key aspects of these pulses over user-defined lookback periods: Net Frequency: The number of bullish pulses minus the number of bearish pulses. A positive value indicates more buying pulses, while a negative value indicates more selling pulses. Net Amplitude : The cumulative volume of bullish pulses minus the cumulative volume of bearish pulses. This measures the overall strength and conviction behind the pulses. Primary Trend Signal The indicator's primary signal comes from a strict dominance condition. It doesn't just look for more buying or selling pulses; it checks if these pulses are powerful enough to overwhelm the total opposite pressure in the market. Bullish Dominance (Green Background): A strong bullish signal is generated when the total volume of all bullish pulses within a lookback period is greater than the total down-volume from all bars (not just pulses) in that same period. Bearish Dominance (Red Background): A strong bearish signal is generated when the total volume of all bearish pulses is greater than the total up-volume from all bars in that period. The chart background is colored green for bullish dominance and red for bearish dominance, providing a clear visual cue for when one side has taken decisive control. Plotted Data In addition to the background coloring, the indicator plots several lines in its own pane for more detailed analysis: Net Frequency: Shows the trend in the number of bull vs. bear pulses. Net Amplitude: Shows the trend in the strength of bull vs. bear pulses. Bullish/Bearish Amplitude: The individual cumulative volumes for bull and bear pulses. Dynamic Threshold: The adaptive value used to identify pulses. By combining an adaptive detection method with a strict dominance condition, this tool aims to filter out market noise and highlight periods of genuinely strong, volume-backed trends.
אינדיקטור Pine Script®
מאת ‎Cmo22‎
Realtime RenkoI've been working on real-time renko for a while as a coding challenge. The interesting problem here is building renko bricks that form based on incoming tick data rather than waiting for bar closes. Every tick that comes through gets processed immediately, and when price moves enough to complete a brick, that brick closes and a new one opens right then. It's just neat because you can run it and it updates as you'd expect with renko, forming bricks based purely on price movement happening in real time rather than waiting for arbitrary time intervals to pass. The three brick sizing methods give you flexibility in how you define "enough movement" to form a new brick. Traditional renko uses a fixed price range, so if you set it to 10 ticks, every brick represents exactly 10 ticks of movement. This works well for instruments with stable tick sizes and predictable volatility. ATR-based sizing calculates the average true range once at startup using a weighted average across all historical bars, then divides that by your brick value input. If you want bricks that are one full ATR in size, you'd use a brick value of 1. If you want half-ATR bricks, use 2. This inverted relationship exists because the calculation is ATR divided by your input, which lets you work with multiples and fractions intuitively. Percentage-based sizing makes each brick a fixed percentage move from the previous brick's close, which automatically scales with price level and works well for instruments that move proportionally rather than in absolute tick increments. The best part about this implementation is how it uses varip for state management. When you first load the indicator, there's no history at all. Everything starts fresh from the moment you add it to your chart because varip variables only exist in real-time. This means you're watching actual renko bricks form from real tick data as it arrives. The indicator builds its own internal history as it runs, storing up to 250 completed bricks in memory, but that history only exists for the current session. Refresh the page or reload the indicator and it starts over from scratch. The visual implementation uses boxes for brick bodies and lines for wicks, drawn at offset bar indices to create the appearance of a continuous renko chart in the indicator pane. Each brick occupies two bar index positions horizontally, which spaces them out and makes the chart readable. The current brick updates in real time as new ticks arrive, with its high, low, and close values adjusting continuously until it reaches the threshold to close and become finalized. Once a brick closes, it gets pushed into the history array and a new brick opens at the closing level of the previous one. What makes this especially useful for debugging and analysis are the hover tooltips on each brick. Clicking on any brick brings up information showing when it opened with millisecond precision, how long it took to form from open to close, its internal bar index within the renko sequence, and the brick size being used. That time delta measurement is particularly valuable because it reveals the pace of price movement. A brick that forms in five seconds indicates very different market conditions than one that takes three minutes, even though both bricks represent the same amount of price movement. You can spot acceleration and deceleration in trend development by watching how quickly consecutive bricks form. The pine logs that generate when bricks close serve as breadcrumbs back to the main chart. Every time a brick finalizes, the indicator writes a log entry with the same information shown in the tooltip. You can click that log entry and TradingView jumps your main chart to the exact timestamp when that brick closed. This lets you correlate renko brick formation with what was happening on the time-based chart, which is critical for understanding context. A brick that closed during a major news announcement or at a key support level tells a different story than one that closed during quiet drift, and the logs make it trivial to investigate those situations. The internal bar indexing system maintains a separate count from the chart's bar_index, giving each renko brick its own sequential number starting from when the indicator begins running. This makes it easy to reference specific bricks in your analysis or when discussing patterns with others. The internal index increments only when a brick closes, so it's a pure measure of how many bricks have formed regardless of how much chart time has passed. You can match these indices between the visual bricks and the log entries, which helps when you're trying to track down the details of a specific brick that caught your attention. Brick overshoot handling ensures that when price blows through the threshold level instead of just barely touching it, the brick closes at the threshold and the excess movement carries over to the next brick. This prevents gaps in the renko sequence and maintains the integrity of the brick sizing. If price shoots up through your bullish threshold and keeps going, the current brick closes at exactly the threshold level and the new brick opens there with the overshoot already baked into its initial high. Without this logic, you'd get renko bricks with irregular sizes whenever price moved aggressively, which would undermine the whole point of using fixed-range bricks. The timezone setting lets you adjust timestamps to your local time or whatever reference you prefer, which matters when you're analyzing logs or comparing brick formation times across different sessions. The time delta formatter converts raw milliseconds into human-readable strings showing days, hours, minutes, and seconds with fractional precision. This makes it immediately clear whether a brick took 12.3 seconds or 2 minutes and 15 seconds to form, without having to parse millisecond values mentally. This is the script version that will eventually be integrated into my real-time candles library. The library version had an issue with tooltips not displaying correctly, which this implementation fixes by using a different approach to label creation and positioning. Running it as a standalone indicator also gives you more control over the visual settings and makes it easier to experiment with different brick sizing methods without affecting other tools that might be using the library version. What this really demonstrates is that real-time indicators in Pine Script require thinking about state management and tick processing differently than historical indicators. Most indicator code assumes bars are immutable once closed, so you can reference `close ` and know that value will never change. Real-time renko throws that assumption out because the current brick is constantly mutating with every tick until it closes. Using varip for state variables and carefully tracking what belongs to finalized bricks versus the developing brick makes it possible to maintain consistency while still updating smoothly in real-time. The fact that there's no historical reconstruction and everything starts fresh when you load it is actually a feature, not a limitation, because you're seeing genuine real-time brick formation rather than some approximation of what might have happened in the past.
אינדיקטור Pine Script®
מאת ‎The_Peaceful_Lizard‎
2
Low Range Predictor [NR4/NR7 after WR4/WR7/WR20, within 1-3Days]Indicator Overview The Low Range Predictor is a TradingView indicator displayed in a single panel below the chart. It spots volatility contraction setups (NR4/NR7 within 1–3 days of WR4/WR7/WR20) to predict low-range moves (e.g., <0.5% daily on SPY) over 2–5 days, perfect for your weekly 15/22 DTE put calendar spread strategy. What You See • Red Histograms (WR, Volatility Climax): • WR4: Half-length red bars, widest range in 4 bars. • WR7: Three-quarter-length red bars, widest in 7 bars. • WR20: Full-length red bars, widest in 20 bars. • Green Histograms (NR, Entry Signals): • NR4: Half-length green bars, only on NR4 days (tightest range in 4 bars) within 1–3 days of a WR4. • NR7: Full-length green bars, only on NR7 days within 1–3 days of a WR7. • Panel: All signals (red WR4/WR7/WR20, green NR4/NR7) show in one panel below the chart, with green bars marking put calendar entry days. Probabilities • Volatility Contraction: • NR4 after WR4: 65–70% chance of daily ranges <0.5% on SPY for 2–5 days (ATR drops 20–30%). Occurs ~2–3 times/month. • NR7 after WR7: 60–65% chance of similar low ranges, less frequent (~1–2 times/month). • Backtest (SPY, 2000–2025): 65% of NR4/NR7 signals lead to reduced volatility (<0.7% daily range) vs. 50% for random days. • Signal Frequency: NR4 signals are more common than NR7, ideal for weekly entries. WR20 provides context but isn’t tied to NR signals.
אינדיקטור Pine Script®
מאת ‎tobi8853‎
NWOG/NDOG + EHPDA🌐 ENGLISH DESCRIPTION Hybrid NWOG/NDOG + EHPDA – Advanced Gaps & Event Horizon Indicator (Enhanced with Real-Time Alerts and Info Table) 📊 Overview This advanced indicator combines automatic detection of weekly gaps (NWOG) and daily gaps (NDOG) with the Event Horizon (EHPDA) concept, now featuring customizable alerts and a real-time info table for a more efficient trading experience. Designed for traders who operate based on institutional price structures, liquidity zones, and SMC/ICT confluences. ✨ Key Features 1. Gap Detection & Visualization NWOG (New Week Opening Gap): Identifies and visualizes the gap between Friday’s close and Monday’s open. NDOG (New Day Opening Gap): Detects daily gaps on intraday timeframes. Enhanced visualization: Semi-transparent boxes, price levels (top, middle, bottom), and lines extended to the current bar. Customizable labels: Display gap formation date and price levels (optional). 2. Event Horizon (EHPDA) Automatically calculates the Event Horizon level between two non-overlapping gaps. Dashed line marking the equilibrium zone between bullish and bearish gaps. 3. Advanced 5pm-6pm Mode Special option to detect the Sunday-Monday gap using 4H bars. 4. Real-Time Alerts New gaps (NWOG/NDOG): Immediate notification when a new gap forms. Gap fill: Alert when price completely fills a gap. Event Horizon active: Notification when the Event Horizon level is triggered. 5. Info Table Real-time display: number of active gaps, Event Horizon status, time remaining until weekly/daily close. Customizable: position, size, and style. 🎨 Customization Configurable colors for bullish gaps, bearish gaps, and Event Horizon line. Customizable price labels and date format. 📈 Use Cases Reversal trading, price targets, liquidity zones, SMC/ICT confluences. ⚙️ Recommended Settings Timeframes: Daily and intraday (15m, 1H, 4H, etc.). NWOG: Enable on all timeframes. NDOG: Enable only on intraday. Max Gaps: 3-5 for clean charts, 10-15 for historical analysis. 📝 Important Notes Works best on 24/5 markets (Forex, Crypto). Gaps automatically close when filled. Event Horizon only appears with at least 2 non-overlapping gaps.
אינדיקטור Pine Script®
מאת ‎CDC_Trading_LABN‎
Spread Trading Z-ScoreIndicator: Z-Score Spread Indicator Description The "Z-Score Spread Indicator" is a powerful tool for traders employing mean-reversion strategies on the spread between two financial assets (e.g., futures contracts like MNQ and MES). This indicator calculates and plots the Z-score of the price spread, indicating how far the current spread deviates from its historical mean. It features customizable entry and exit thresholds with adjustable offsets, along with an estimated p-value displayed in a table to assess statistical significance. Key Features Asset Selection: Allows users to select two asset symbols (e.g., CME_MINI:MNQ1! and CME_MINI:MES1!) via customizable inputs. Z-Score Calculation: Computes the Z-score based on the spread’s simple moving average and standard deviation over a user-defined lookback period. Customizable Thresholds with Offset: Offers adjustable base entry and exit thresholds, with an optional offset to fine-tune trading levels, plotted as horizontal lines. P-Value Estimation: Provides an approximate p-value to evaluate the statistical significance of the Z-score, displayed in a table anchored to the top-left corner. Visual Representation: Plots the Z-score with a zero line and threshold lines for intuitive interpretation. Adjustable Parameters Asset A Symbol: Symbol for Asset A (default: CME_MINI:MNQ1!). Asset B Symbol: Symbol for Asset B (default: CME_MINI:MES1!). Z-Score Lookback: Lookback period for Z-score calculation (default: 40, minimum 2). Base Entry Threshold: Threshold for entry signals (default: 1.8, adjustable with a step of 0.1). Base Exit Threshold: Threshold for exit signals (default: 0.5, adjustable with a step of 0.1). Threshold Offset (+/-): Offset to adjust entry and exit thresholds symmetrically (default: 0.0, range -5.0 to 5.0, step 0.1). Usage Add the indicator to your chart via the "Indicators" tab. Customize the parameters based on your preferred assets and trading strategy (lookback period, thresholds, offset). Observe the Z-score plot and threshold lines (red for short entry, green for long entry, orange dotted for exits) to identify potential trade setups. Check the p-value table in the top-left corner to assess the statistical significance of the current Z-score. Use this data to inform mean-reversion trading decisions, ideally in conjunction with other indicators. Notes A Z-score above the entry threshold (positive) or below the negative entry threshold suggests a potential short or long entry, respectively. Exits are signaled when the Z-score crosses the exit thresholds. The p-value is an approximation based on the normal distribution; a value below 0.05 typically indicates statistical significance, but further validation is recommended. The indicator uses a simple spread (Asset A - Asset B) without volatility adjustments; consider pairing it with a lots calculator for hedging. Limitations The p-value is an approximation and may not reflect advanced statistical tests (e.g., ADF) due to Pine Script constraints. No automatic trading signals are generated; it provides data for manual analysis. Author Developed by grogusama, October 15, 2025, 07:29 PM CEST.
אינדיקטור Pine Script®
מאת ‎Grogusama‎