Weighted Stochastic Oscillator [SeerQuant]Weighted Stochastic Oscillator (WSTO)
The Weighted Stochastic Oscillator (WSTO) is an enhanced stochastic-based trend oscillator that builds on the traditional %K/%D framework by introducing adaptive weighting and configurable smoothing. By dynamically amplifying the oscillator’s deviation from the 50 midline based on a selected market “weight” (Volume, Momentum, Volatility, or Reversion Factor), WSTO provides a cleaner view of trend strength and regime shifts—without relying on classic 80/20 overbought/oversold bands.
⚙️ How It Works
WSTO uses a standard stochastic calculation, measuring where price sits within its rolling high/low range over a lookback period. That %K is then “context-weighted” using your selected weighting method: Volume, Momentum, Volatility, or Reversion Factor.
The weighting is normalized for stability (so it doesn’t blow out during abnormal periods), then applied by amplifying the oscillator’s deviation from the 50 midline. In practice, this means strong conditions make the oscillator lean harder away from 50 (clearer trend), while quieter conditions keep it closer to traditional stochastic behaviour.
The weighted %K is then smoothed using your chosen moving average type, and a second smoothing pass generates the %D signal line. Trend logic is based on a neutral band around 50: bullish when the oscillator holds above (50 + Neutral Zone), bearish when it holds below (50 - Neutral Zone), and neutral while it remains inside that range.
✨ Customizable Settings
WSTO is built to be tuned without overcomplication. You can choose the stochastic source mode (Close, HLC3, OHLC4, or a custom input source), set the stochastic length, and control smoothing via separate %K and %D smoothing lengths.
You can also pick from a wide selection of moving average types (SMA, EMA, RMA, HMA, DEMA, TEMA, etc.) to match your style.
The weighting method is the core differentiator. Volume weighting emphasizes participation, Momentum weighting emphasizes directional impulse, Volatility weighting emphasizes expansion/contraction, and Reversion Factor weighting biases toward mean-reversion dynamics by responding inversely to variance. On the style side, you can select a preset colour scheme (Default/Modern/Cool/Monochrome) or enable custom bull/bear/neutral colours. Candle coloring is optional, and you can decide whether candles follow %K or %D.
🚀 Features and Benefits
WSTO gives you an alternative stochastic that adapts to market conditions instead of treating every regime the same. The weighting engine makes trend strength more obvious when conditions justify it, while the neutral-zone framework reduces noise compared to classic OB/OS bands. With flexible smoothing and clean visual state changes, it works well as a trend filter, a confirmation layer, or a regime signal alongside other systems.
📜 Disclaimer
This indicator is for educational purposes only and does not constitute financial advice. Past performance does not guarantee future results. Always consult a licensed financial advisor before making trading decisions. Use at your own risk.
תנודתיות
Multi-Filter Profit MaximizerDescription : This script is a trend-following system designed to maximize profits by capturing extended trends while filtering out market noise. It integrates four core components:
SuperTrend (Customized): Acts as a dynamic trailing stop and trend baseline.
ADX Filter: Ensures signals only occur during active volatility to avoid choppy markets.
CVD (Cumulative Volume Delta): Validates the price movement with actual volume flow.
Stochastic Momentum: Pinpoints high-probability entry entries within the trend.
--------------------------------------------------------------------------------------------------------------
How to Use This Indicator (Profit Maximization Manual)
This indicator is designed to prioritize **“win rate” and “price range”** over the number of entries.
Market Environment Recognition (Background & Lines):
Green background & green line: An uptrend. Focus solely on long positions.
Red background & red line: A downtrend. Focus solely on short positions.
EMA 200 (Orange Line): The iron rule is to go long if the candlestick is above this line, and short if it's below.
Entry (BUY / SELL Signals):
Enter when the BUY or SELL label appears.
This is the moment when the “trend direction,” “momentum via ADX,” “fund flow via CVD,” and “timing via Stochastic” all align perfectly.
Profit Maximization Exit (Most Critical):
Stop Loss (SL): Exit immediately if the candle body breaks below the green (or red) SuperTrend line right after entry. No hesitation.
Take Profit (TP):
Method A (Trend Riding): Hold until the SuperTrend line changes color. If a major trend emerges, this can yield tremendous profits.
Method B (Conservative Approach): Take half the profit at roughly a 1:2 risk-reward ratio, then hold the remainder aligned with the SuperTrend.
Why This is “The Best”
Many indicators get whipped back and forth in range-bound markets, spitting out profits. It's coded to generate absolutely no signals when ADX < 20 (weak market). Furthermore, using SuperTrend as the stop-loss line forces a structure that comes closest to the Holy Grail of trading: **“Small losses, unlimited profits as long as the trend continues.”**
Alpha Hunter Integrated MACD & Oscillator [wjdtks255]Indicator Title: Alpha Hunter Integrated MACD & Oscillator Pro
Short Description
A high-precision hybrid oscillator that integrates MACD dynamics with a secondary-smoothed histogram to eliminate market noise and capture trend reversals with minimal lag.
Detailed Description
Overview
The Alpha Hunter Integrated MACD & Oscillator is designed to overcome the inherent lag of standard MACD indicators. By applying an exponential moving average (EMA) filter to the histogram itself and incorporating a momentum direction check, this tool identifies high-probability entry points while filtering out "whipsaws" commonly found in choppy markets.
Key Technical Pillars
Dual-Smoothed Histogram: Unlike standard oscillators, this script smooths the raw histogram values using a secondary filtering period. This reveals the true underlying momentum before price action fully shifts.
Momentum Directional Filter: Entry signals are only triggered when the MACD line’s slope aligns with the crossover, ensuring you don't enter against a stalling trend.
Dynamic Trend Clouds: The visual fill between the MACD and Signal lines acts as a "Trend Cloud," providing immediate visual feedback on the strength and duration of the current trend.
The Winning Trading Strategy (How to Use)
To maximize win rates, it is highly recommended to use this indicator as a Confirmation Oscillator alongside a Long-term Trend Filter (like a 200 EMA) on your main chart.
1. Long Setup (Buy)
Context: Price must be trading above the 200 EMA on the main chart.
Signal: A green "BUY" triangle and label appear on the oscillator.
Confirmation: The Histogram should be green and rising.
Exit: Exit at a pre-defined Take Profit (TP) box or when a bearish MACD crossunder occurs.
2. Short Setup (Sell)
Context: Price must be trading below the 200 EMA on the main chart.
Signal: A red "SELL" triangle and label appear on the oscillator.
Confirmation: The Histogram should be red and falling.
Exit: Exit at the designated Stop Loss (SL) or when a bullish MACD crossover occurs.
Input Parameters & Optimization
Fast/Slow/Signal: Default 12, 26, 9. (Standard for most markets).
Signal Smoothing: Set to 5 for a balance of speed and reliability. Increase to 8+ for swing trading on higher timeframes.
Recommended Timeframes: 15m, 1h, and 4h for the best signal-to-noise ratio.
Author's Note
This indicator is a "No-Repaint" script. Signals are confirmed at the close of the candle to ensure reliability during live trading. Always use proper risk management.
[codapro] PressureBox Breakout Engine Full Breakdown PressureBox Breakout Engine is a revamped and expanded version of a prior post. This release includes a more educational breakdown and deeper configuration guidance, in response to user requests for clarity on how the system works and how to use it effectively.
This tool is a compression-detection and breakout-anticipation engine that blends Donchian channel logic, ATR filtering, and a proprietary “pressure” oscillator derived from volume-weighted momentum. It visually highlights real-time “compression zones” with dynamic shaded boxes and flags potential breakouts using configurable BUY/SELL markers.
It’s designed to help traders identify and analyze different market setups — including potential trend continuations, volatility breakouts, and range fade conditions — by surfacing key compression and pressure states visually on the chart.
Key Features
*Dynamic Compression Boxes: drawn when Donchian range < smoothed ATR threshold
*Breakout Flags: BUY/SELL alerts when price breaks outside compression range
*Custom Volume Pressure Score: MFI + CMF hybrid from -1 to +1
*Candle Overlap Filter: optional % overlap indicator for noise detection
*Adaptive Box Shading: transparency adjusts to pressure strength
*Clean Re-Anchoring Logic: boxes reset only when compression ends
*Full User Control: configure inputs for box length, blend logic, signal rules
How It Works
Compression Box Logic
A box is drawn when the Donchian range (e.g. high - low over N bars) falls below a moving ATR threshold.
The box dynamically extends and adjusts height/width until a breakout or timeout occurs.
Users can toggle whether Donchian uses highs/lows or closes and whether the box shows a midline.
Breakout Signal Logic
BUY signal: Close breaks above box high, with optional compression condition on the prior bar.
SELL signal: Close breaks below box low.
Signals use ATR-based offsets for clean separation on the chart.
Pressure Score Logic
Pressure is a weighted blend between:
MFI (Money Flow Index) — momentum-based
CMF (Chaikin Money Flow) — flow-based
The result is a smoothed -1 to +1 score that represents volume pressure.
This is used both for:
Box transparency (strong pressure = darker shading)
Optional overlay plot
Overlap Mode
Calculates smoothed % of how much recent candles overlap.
Useful for filtering non-directional chop and low-quality breakouts.
Can be toggled on/off as a separate overlay line.
⚙️ Default Optimized Settings
Setting Value
Donchian Length 8
ATR Length 13
ATR Multiplier 3.1
ATR SMA Length 21
Max Extend Bars 55
MFI Length 25
CMF Length 55
Blend Weight (MFI:CMF) 0.5
These are optimized for detecting tight consolidations and explosive breakout potential, especially on intraday 5m–15m charts across futures, forex, and crypto.
How to Use It
Watch for the compression box to form — this marks a squeeze zone.
Breakouts with BUY/SELL flags are most reliable after long compressions.
Adjust the Blend Weight to prioritize MFI (momentum) or CMF (flow).
Use Overlap % to filter sideways markets or low-quality signals.
Combine with support/resistance, VPA tools, or trend filters for layered setups.
Disclaimer
This tool was created using the CodaPro Pine Script architecture engine — designed to produce robust trading overlays, educational visuals, and automation-ready alerts.
It is provided strictly for educational purposes and does not constitute financial advice. Always backtest and demo before applying to real capital.
SwissSignals GOLDWhen trading, your order is:
Status WAITING → do nothing
Status SETUP → pay attention
LIVE signal → take control of the market (if you want)
TP1 → BE is active
Either TP2/TP3/TP4 or exit BE
Squeeze ChannelSqueeze Channel
Volatility compression is one of the most reliable precursors to significant price movement. When markets consolidate, energy builds—like a coiled spring waiting to release. This indicator detects these compression phases using the classic squeeze methodology, then captures the consolidation range as a tradeable channel. The tighter the squeeze, the more potential energy stored for the eventual breakout.
What makes this approach effective is the combination of volatility-based timing with price structure. Rather than blindly trading every squeeze release, the indicator defines clear breakout levels based on the actual swing highs and lows formed during compression. This creates objective entry triggers while the squeeze intensity gradient (yellow → red) helps gauge the quality of the setup before committing.
How It Works
Squeeze Detection
The indicator identifies periods of volatility compression when Bollinger Bands contract inside Keltner Channels. A 5-color gradient (yellow → orange → red) visualizes squeeze intensity in real-time—the tighter the squeeze, the closer to red.
Channel Formation
When a squeeze begins, the indicator captures a swing high/low channel:
- Lookback : Grabs the highest high and lowest low over the past N bars
- Lookforward : Allows the channel to expand if price exceeds bounds in the first few bars
- Lock : Once the expansion window closes, the channel locks in place
The channel persists until price breaks out, regardless of whether the squeeze has ended.
Signal Types
Primary Signals
Bullish Breakout | 🔼 Teal Triangle | Close above channel high
Bearish Breakout | 🔽 Red Triangle | Close below channel low
Failed Breakout Reversals
When enabled, the indicator watches for failed breakouts—price breaks one direction then reverses through the opposite channel bound.
Bull Reversal | 💎 Cyan Diamond | Failed bear breakout, reclaims above
Bear Reversal | 💎 Magenta Diamond | Failed bull breakout, breaks below
Extended S/R Retest Signals
After a breakout, channel levels are stored as support/resistance for future retests. These levels remain invisible until price approaches within a user-defined ATR distance.
S/R Bull Breakout | 🔼 Faded Triangle | Breaks above extended resistance
S/R Bear Breakout | 🔽 Faded Triangle | Breaks below extended support
S/R Bull Reversal | 💎 Faded Diamond | Reclaims extended support
S/R Bear Reversal | 💎 Faded Diamond | Rejected at extended resistance
Settings
Squeeze Detection
- Bollinger Length (default: 12) — Shorter length = tighter bands, easier squeeze entry
- Bollinger Multiplier (default: 2.0)
- Keltner Length (default: 20)
- Keltner ATR Multiplier (default: 2.0) — Higher = wider channel, easier squeeze entry
Channel Settings
- Swing Lookback Bars (default: 5) — Bars to look back for initial channel
- Swing Lookforward Bars** (default: 3) — Bars to allow channel expansion
Reversal Detection
- Enable Failed Breakout Reversal — Toggle reversal signals on/off
- Reversal Watch Bars (default: 7) — How long to watch for failed breakout
Extended S/R
- Show Extended S/R Levels — Display historical channel levels
- Enable S/R Retest Signals — Toggle retest signals on/off
- Extended Level Bars (default: 50) — How long levels remain active
- S/R Signal Delay Bars (default: 5) — Delay before retest signals activate (filters noise)
- ATR Proximity Threshold (default: 1.0) — Distance for level visibility
- ATR Length (default: 14)
Visual Guide
- Colored dots = Active squeeze channel (gradient shows intensity)
- Fuchsia dots = Channel waiting for breakout (squeeze ended)
- Faded teal/red dots = Extended S/R levels (appear on proximity)
- Triangles = Breakout signals
- Diamonds = Reversal signals (failed breakouts)
T3 smooth MACD BB What this script does – in plain words
Smoothes the MACD with a special T3 filter, turning the raw MACD into a smoother line so short‑term noise is reduced.
Draws Bollinger‑style bands around that smoothed MACD, giving a “mid line” and upper/lower envelopes that show how far the line is from its recent average.
Colors the main line green when it’s rising and red when it’s falling, helping you see the trend at a glance.
Adds a bold zero line plus light gray markers on the bands so you can spot crossovers easily.
Includes a translucent blue fill between the upper and lower bands for visual emphasis.
This gives a clear, color‑coded view of MACD momentum plus volatility bands—all on the same indicator pane.
Big Trend Catcher: Dual-Gate EMA & ATR Trailing Swing TraderThe Big Trend Catcher: Long-Only Progressive Swing System
OVERVIEW
The Big Trend Catcher is a high-conviction, long-only swing trading strategy designed to identify and ride sustained market moves. Unlike traditional trend-following systems that often get "chopped out" during sideways consolidation, this strategy utilizes a Dual-Gate Filter to ensure you only enter when short-term momentum and the long-term trend are in total alignment.
It is specifically tuned for high-growth stocks and ETFs where capturing the lion’s share of a multi-week or multi-month move is the primary objective.
CORE LOGIC: THE DUAL-GATE SYSTEM
To maintain a high quality of entries, the strategy requires a "confirmed launch" through two distinct filters:
The Momentum Gate (20 EMA): Identifies immediate price acceleration and volume-backed impulse.
The Long-Term Gate (100 EMA): Acts as the ultimate trend filter. The script utilizes a "Signal Memory" logic—if an impulse happens while price is still below the 100 EMA, the trade is held in a "Pending" state. The entry only triggers once the price closes firmly above the 100 EMA.
Goal: This prevents "bottom fishing" in established downtrends and keeps you in cash during sideways "death loops" when the long-term direction is unclear.
KEY FEATURES
1. Progressive Pyramiding (Scale-In)
The biggest profits in swing trading are often made by adding to winners. This system features two automated scale-in triggers:
Velocity Adds (VOLC): Adds to the position if the stock is up >10% and moving with rising momentum, allowing you to build a larger position as the trend proves its strength.
Pullback Adds: Adds to the position when the price tests the 20 EMA and holds, allowing you to buy the "dip" within a healthy uptrend.
2. The Phoenix Re-Entry
This logic is designed to catch "V-shaped" recoveries. If the strategy exits on a trend break but the price aggressively reclaims the 20 EMA on massive volume shortly after, it re-enters the trade. This ensures you aren't left behind during the second leg of a major run after a temporary shakeout.
3. Iron-Floor ATR Exit
We use a 3.5x ATR Trailing Stop combined with the 100 EMA. This wider-than-average "breathing room" is designed to keep you in for significant gains while ignoring the minor daily volatility that often shakes out traders with tighter stops.
HOW TO USE
Best Timeframes: Daily (D) is recommended for identifying major cycles, but it can be applied to the 4-Hour (4H) for more active swing trading.
Settings:
* 20 EMA: Your short-term momentum guide.
* 100 EMA: Your long-term trend guide.
* ATR Multiplier: Set to 3.5 for maximum "trend hugging."
SUMMARY OF VISUALS
Blue Line (100 EMA): The Long-Term Trend.
Yellow Line (20 EMA): The Short-Term Momentum.
Red Stepped Line: Your ATR Trailing Floor (The "Iron Floor").
Lime Triangle: Initial Trade Entry.
Blue/Orange Shapes: Progressive Scale-in points.
RDI Price ZonesOverview
RDI Price Zones is a manual price-level visualization indicator.
It draws user-defined horizontal zones and a reference line to help visually organize important price areas on the chart.
This script does not calculate, infer, or fetch market data.
All levels are entered manually by the user.
What it draws
• Reference Line — A horizontal line at a user-defined price level.
• Upper Zones — Rectangular price areas drawn to the right of the chart.
• Lower Zones — Rectangular price areas drawn to the left of the chart.
These elements are purely visual and do not generate signals.
Inputs
• Up to three upper zone price levels (manual input).
• Up to three lower zone price levels (manual input).
• One reference price level.
• Zone thickness defined as a percentage of price.
• Optional color and border settings.
Design notes
• Zones are drawn as rectangles anchored to price levels.
• Rectangles extend a fixed number of bars for visualization purposes only.
• Percentage-based thickness allows zones to scale across different instruments.
Usage
This indicator is intended to help users visually map predefined price areas during a session.
It does not predict price movement, suggest trades, or provide trading signals.
Disclaimer
This script is provided for educational and visualization purposes only.
It does not offer trading advice, does not guarantee results, and should not be used as the sole basis for trading decisions.
Short summary (≤200 chars)
Manual price-zone visualization tool. Draws user-defined rectangular zones and a reference line. No calculations, no signals, no predictions. Educational use only.
IV History from Realized Volatility# Realized Volatility History - Quick Start Guide
## What This Does
Displays historical realized volatility (RV) calculated directly from price movements. Compare it against your current implied volatility to identify options trading opportunities and gauge whether premium is expensive or cheap.
## How to Use
1. **Get Current IV**: Check your broker's options chain and find the ATM (at-the-money) implied volatility for your ticker
2. **Input the Value**: Open indicator settings and enter the current IV (e.g., `0.15` for 15%) - this creates a reference line
3. **Read the Chart**:
- **Purple line** = Historical realized volatility from actual price movements
- **Red dashed line** = Your current ATM IV (reference)
- **Orange line** = 30-day moving average (optional)
4. **Interpret the Data**:
- **RV below IV** → Options premium is relatively expensive (consider selling premium)
- **RV above IV** → Options premium is relatively cheap (consider buying options)
- **IV Rank > 70%** → High volatility environment
- **IV Rank < 30%** → Low volatility environment
## Settings You Can Adjust
- **Current ATM IV**: Reference line for comparison (update periodically)
- **RV Rolling Window**: Calculation window for realized volatility (default: 10 days)
- **Lookback Period**: Period for IV rank calculation (default: 60 days)
- **Show 30-Day Average**: Toggle moving average line
## Limitations
This indicator requires manual IV updates since TradingView doesn't have direct access to options data. You'll need to check your broker periodically and update the input for accuracy.
---
*Method: Calculates annualized realized volatility using rolling standard deviation of log returns, providing a comparison baseline for evaluating implied volatility levels.*
Elder AutoEnvelope 1m/5mOverview
This script is an advanced implementation of Dr. Alexander Elder’s AutoEnvelope, specifically optimized for 1-minute (1m) and 5-minute (5m) low-timeframe trading.
The logic treats the market as a "manic-depressive" entity:
Center Line (26 EMA): Represents the fair value consensus.
Fast Line (13 EMA): Captures short-term price momentum.
Envelopes (Bands): Represent the limits of price "sanity." Under normal conditions, 95% of price action should remain within these bands.
Key Features
Powered by Pine Script V6: Built on the latest engine for maximum precision and performance.
Real-time Coverage Tracker: A dashboard in the top-right corner displays the percentage of price bars contained within the bands over the lookback period. The goal is to adjust the Multiplier until coverage is ~95%.
Dual Smoothing: To combat high-frequency noise on 1m/5m charts, this script applies a secondary smoothing layer to the channel width, preventing the "jagged" lines found in standard indicators.
Recommended Settings
Lookback: Defaulted to 300. On a 1m chart, this represents 5 hours of data, providing a much more robust "normal" range than the standard 100-period setting.
Multiplier: Usually ranges between 2.0 and 3.5 depending on the asset's volatility. Tune this until the Coverage Panel shows ~95%.
SmoothLen: Defaulted to 20. Increase this value for even smoother, more "parallel" bands during high-noise sessions.
Practical Trading Advice
Take Profit Zones: In an uptrend, treat the Upper Band as a primary target. When price pierces the band and closes back inside, it’s often the climax of the move.
Mean Reversion: When price touches the Lower Band while significantly stretched away from the yellow Center Line, look for a bounce back to the value area, especially if the Purple Fast Line begins to flatten.
Trend Filtering:
Price above Fast Line (Purple) + Upward slope: Bullish bias. Only look for Longs or Profit Taking.
Price below Fast Line (Purple) + Downward slope: Bearish bias. Only look for Shorts or Covering.
Asset Calibration: When switching assets (e.g., Gold to BTC), always fine-tune the Multiplier. The bands are only statistically valid when the Coverage Panel stays between 94% and 96%.
指标简介
本脚本是基于亚历山大·爱尔德博士（Dr. Alexander Elder）著名的“自动包络线”（AutoEnvelope）理论开发的进阶版本，特别针对 1分钟（1m）和 5分钟（5m） 等短周期高频交易进行了优化。
该指标的核心逻辑是将市场视为一个“躁郁症患者”：
中心线 (26 EMA)：代表市场的平均价值认同。
快线 (13 EMA)：代表短期价格动能。
包络线 (Bands)：代表价格波动的极端边界（95% 的价格应运行在通道内）。
核心功能
V6 引擎驱动：采用最新的 Pine Script V6 编写，计算更精准，内存占用更低。
实时覆盖率统计：右上角实时显示过去 300 根 K 线中有多少比例落在通道内。目标是手动调整倍数（Multiplier）使该数值维持在 95% 左右。
双重平滑处理：针对短线噪音，对通道宽度进行了二次平滑，避免了传统指标在 1 分钟图上常见的“锯齿状”变形。
参数设置建议
Lookback (回溯周期)：默认 300。在 1m 图上代表过去 5 小时，能提供比默认 100 周期更稳定的边界。
Multiplier (偏离倍数)：根据不同品种调整（通常在 2.0 - 3.5）。请观察右上角面板，当覆盖率接近 95% 时，该倍数最为准确。
SmoothLen (平滑系数)：默认 20。如果觉得轨道太乱，可调高此值。
实际交易建议
波段止盈点：在上升趋势中，当价格刺破上轨且 K 线实体收回上轨下方时，是绝佳的多头平仓位。
均值回归：当价格偏离中心线触碰下轨，且快线（紫色）开始走平时，预示即将反弹回中心线。
趋势过滤：
价格在快线（紫色）上方且快线斜率向上：只做多或平多，不逆势抄顶。
价格在快线（紫色）下方且快线斜率向下：只做空或平空。
覆盖率校准：切换交易品种（如从黄金切换到比特币）后，务必微调 Multiplier，确保覆盖率处于 94%-96% 之间，此时的边界才具有统计学意义。
Trend Cloud with Buy/Sell Text [wjdtks255]Indicator Title: Trend Cloud with Buy/Sell Signal Pro
Short Description
A high-probability trend-following indicator based on Supertrend dynamics, enhanced with a Volume Filter to pinpoint explosive entries while minimizing false breakouts.
Detailed Description (Overview)
The Trend Cloud with Buy/Sell Text is designed for traders who prioritize clarity and momentum. It visualizes market trends through a "Trend Cloud" system and generates real-time BUY/SELL signals only when price action is backed by significant trading volume.
Key Technical Pillars
Dynamic Trend Cloud: Fills the area between the price and the Supertrend line, providing immediate visual feedback on trend strength and potential support/resistance zones.
Smart Volume Filter: A unique logic that compares current volume against a 20-period moving average. Labels only appear when a trend shift occurs with above-average volume, filtering out weak "fakeouts."
No-Repaint Labels: Signals are calculated and fixed at the close of the candle, ensuring that the BUY/SELL text remains permanent for reliable historical backtesting and live execution.
The Alpha Hunter Strategy (How to Trade)
1. Long Entry (Buy)
Condition: The cloud turns Aqua and a "BUY" label appears below the candle.
Confirmation: Ensure the price remains above the Aqua Trend Line.
Volume Check: The indicator automatically verifies if the volume is higher than the 20-period average before displaying the label.
Exit: Exit when a "SELL" signal appears or the price closes below the Aqua line.
2. Short Entry (Sell)
Condition: The cloud turns Red and a "SELL" label appears above the candle.
Confirmation: Price should stay below the Red Trend Line.
Exit: Exit when a "BUY" signal appears or the price closes above the Red line.
Input Parameters & Optimization
ATR Period (Default: 10): Determines the sensitivity to price volatility.
ATR Factor (Default: 3.0): Controls the distance of the trend line. Increase to 3.5 - 4.0 to reduce noise in choppy markets.
Volume Filter (Toggle): When enabled, only high-momentum signals are shown.
Recommended Usage
Best Timeframes: 15m, 1h, 4h.
Asset Classes: Highly effective for Crypto (BTC/ETH) and high-volume stocks.
Inside/Outside Bars---
Inside/Outside Bars Detector
This indicator identifies and visualizes Inside Bars and Outside Bars (Engulfing Bars) on your chart, helping traders spot potential breakout and consolidation patterns.
What are Inside/Outside Bars?
• Outside Bars (Outer Bars): Candles that break BOTH the high AND low of the previous candle. These represent periods of increased volatility and potential trend continuation or reversal. Marked with red triangle arrows by default.
• Inside Bars (Inner Bars): Candles where NEITHER the high NOR low breaks the previous candle's range. These represent consolidation and often precede significant price moves. Marked with orange triangle arrows by default.
Features:
✓ Visual arrows above bars for easy identification
✓ Fixed pixel-size arrows that remain visible at any chart zoom level
✓ Statistics table showing counts of outer bars, inner bars, and total bars analyzed
✓ Fully customizable with multiple settings
Customization Options:
• Toggle outer bars and inner bars independently
• Customize arrow colors for each pattern
• Show/hide the statistics table
• Adjust calculation bars (1000 default, max 5000)
• Set to 0 to analyze all available bars up to 5000
How to Use:
Inside bars often indicate consolidation before a breakout, while outside bars suggest increased volatility and potential momentum shifts. Use these patterns in conjunction with your trading strategy to
identify entry/exit points or to confirm trend direction.
---
MINI Lead Osc v2_ CCI_ Impulse_ REG🔹 MINI Lead Osc v2 — Momentum, Impulse & Early Reversal Tool
MINI Lead Osc v2 is a leading momentum oscillator designed to detect early shifts in market strength, impulse exhaustion, and potential reversals before they become obvious on price.
This indicator is part of the ICT Suite ecosystem and is engineered to work in confluence with:
Regression SuperTrend (WAIT)
Liquidity Oscillator (Structure & Bias)
Used together, they form a complete top-down trading framework.
⚙️ Core Logic
MINI Lead Osc v2 blends multiple engines into a single clean signal:
• CCI + RSI slope momentum
• ATR volatility shift
• Pivot-based divergence detection
• Adaptive Sensitivity+ engine
• Regression channel (linreg + RMSE bands)
The output is a normalized lead line that reacts before classic lagging indicators.
🚀 What This Indicator Is Best For
✔ Early trend continuation signals
✔ Detecting impulse starts, weakness, and distribution
✔ Filtering noise during ranges
✔ Momentum confirmation for pullback entries
✔ Spotting divergence without repainting
This is not a standalone “buy/sell spam” indicator — it is a decision-quality tool.
🔁 How to Use (Recommended Setup)
For best results, use MINI Lead Osc v2 together with:
1️⃣ Regression SuperTrend (WAIT)
→ Defines dominant trend & market regime
→ Filters counter-trend signals
2️⃣ Liquidity Oscillator (Structure)
→ Confirms break → pullback → continuation logic
→ Adds HTF bias & session context
3️⃣ MINI Lead Osc v2 (this script)
→ Times entries
→ Detects early momentum shifts
→ Confirms impulse quality
📌 Trade only when all three align.
🧠 Important Notes
• Signals are non-repainting (bar-close confirmed)
• Designed for discretionary trading, not automation
• Works best on 5m – 15m – 1h timeframes
• Crypto, Futures, and FX friendly
⚠️ Disclaimer
This indicator is for educational and analytical purposes only.
It does not constitute financial advice.
Always manage risk and confirm with price action.
BB Re-entry HUD1) What this script does
This indicator is an BB Re-entry HUD
Core idea:
Price sweeps outside BB (often liquidity wick sweep)
Re-enters back inside BB within 1–2 bars
Multiple ELITE++ filters reduce fake signals
HUD scores follow-through strength (trend & momentum confirmation)
2) ELITE++ Re-entry Signal Logic
A BUY/SELL signal is triggered when:
One of the previous 1–2 bars moved outside BB (wick or close, selectable)
Current bar re-enters BB (optionally requires close inside)
Optional filters confirm signal quality:
Outside depth minimum (% of BB width)
Candle direction confirmation (Buy=green, Sell=red)
Re-entry close crosses previous candle 50%
Zone filter near BB edges
Touch filter: wick touches the band
Squeeze → Expand regime requirement
Cooldown to avoid rapid repeat signals
3) Trade Power HUD (0–5 Scoring)
After a signal, HUD evaluates either on the next bar (recommended) or the same bar.
Score components (1 point each):
Structure: short-term structure aligns with direction
Impulse Body: body > average body
Volume: volume > volume MA
BB Trend + Expand: price on trend side + BB width expanding
RSI + ATR: RSI threshold + ATR expanding
Interpretation:
4–5/5 = STRONG → Hold / Trail
2–3/5 = MID → Take partial / be cautious
0–1/5 = WEAK → Higher chance of fakeout
4) How to use (practical)
Enable BB plots and arrows
Wait for BUY/SELL signal
Check HUD score:
4–5: higher follow-through probability
2–3: quick TP / reduced size
0–1: skip or wait for better confirmation
Works well on 5m–15m (intraday) and 1H (smoother swings).
5) Notes
This is not a standalone holy grail—best used with support/resistance and market structure context.
Volatile news periods may produce multiple band breaks—use squeeze/cooldown filters accordingly.
ATR + STRAT Dashboard (LAST + DIR + REV) + Est MovesATR + STRAT Dashboard is a multi-timeframe market structure indicator built around The Strat and ATR context. It summarizes higher-timeframe control (buyers vs sellers), highlights key Strat conditions (inside/outside/2-1-2 style transitions), and flags common reversal candles (hammer / shooting star style signals) to help spot potential turns. It also includes ATR-based context and estimated move guidance so you can quickly gauge whether price has “room” to run or is extended.
What it shows
MTF Dashboard: quick read of trend/control across multiple timeframes
Direction/Control: color-based bias (buyers vs sellers in charge)
Reversal Flags: highlights reversal-style candles for awareness (not guaranteed)
ATR Context + Estimated Moves: volatility-based framework for targets/expectations
Non-repainting HTF behavior: designed to use closed higher-timeframe bars to reduce repaint surprises
Note: This tool is for structure + context, not trade signals by itself. Always confirm with your plan/risk management.
Volatility Expansion Arrows + AlertsDetects a Volatility Expansion
An expansion occurs when:
The current candle’s range is much larger than normal
Default: 1.4× the recent average range
This filters out noise and only reacts to meaningful aggression
yaman short longThis indicator provides clear Long and Short signals to help traders identify potential market direction and trading opportunities with higher confidence.
It is designed to follow price momentum and trend strength, allowing traders to enter trades when the market shows clear directional bias. The indicator focuses on clean signals and avoids unnecessary noise, making it suitable for both beginners and experienced traders.
Key Features:
Clear Long and Short signals displayed on the chart
Helps identify potential trend continuation and reversals
Designed to reduce false signals during choppy market conditions
Suitable for scalping, intraday, and swing trading
Works across multiple markets and timeframes
How to Use:
Long Signal: Indicates potential upward movement when bullish conditions align
Short Signal: Indicates potential downward movement when bearish conditions align
Best used with proper stop-loss and risk management rules
Can be combined with support/resistance or higher timeframe confirmation
Best Markets:
Forex pairs
Gold (XAUUSD)
Cryptocurrencies
Indices
Notes:
Signals are generated after candle close
The indicator does not repaint
This tool is meant to assist decision-making, not guarantee profits
Alg0 Hal0 Peekab00 WindowDescription: Alg0 Hal0 Peekaboo Window
The Alg0 Hal0 Peekaboo Window is a specialized volatility and breakout tracking tool designed to isolate price action within a specific rolling time window. By defining a custom lookback period (defaulting to 4.5 hours), this indicator identifies the "Peekaboo Window"—the high and low range established during that time—and provides real-time visual alerts when price "peeks" outside of that established zone.
This tool is particularly effective for intraday traders who look for volatility contraction (ranges) followed by expansion (breakouts).
How It Works
The indicator dynamically calculates the highest high and lowest low over a user-defined hourly duration. Unlike static daily ranges, the Peekaboo Window moves with the price, providing a "rolling" zone of support and resistance based on recent market history.
Key Features
Rolling Lookback Window: Define your duration in hours (e.g., 4.5h) to capture specific session cycles.
Dynamic Visual Range: High and low levels are automatically plotted and filled with a background color for instant visual recognition of the "value area."
Peak Markers: Small diamond markers identify exactly where the local peaks and valleys were formed within your window.
Breakout Signals: Triangle markers trigger the moment price closes outside the window, signaling a potential trend continuation or reversal.
Unified Alerting: Integrated alert logic notifies you the second a breakout occurs, including the exact price level of the breach.
How to Use the Peekaboo Window
1. Identify the "Squeeze"
When the Peekaboo Window (the shaded area) begins to narrow or "flatten," it indicates the market is entering a period of consolidation. During this time, price is contained within the green (High) and red (Low) lines.
2. Trading Breakouts
The primary signal occurs when a Breakout Triangle appears:
Green Triangle Up: Price has closed above the window's resistance. Look for long entries or a continuation of bullish momentum.
Red Triangle Down: Price has closed below the window's support. Look for short entries or a continuation of bearish momentum.
3. Support & Resistance Rejections
The yellow diamond Peak Markers show you where the market has previously struggled to move further. If the price approaches these levels again without a breakout signal, they can serve as high-probability areas for mean-reversion trades (trading back toward the center of the window).
4. Customizing Your Strategy
Scalping: Lower the Lookback Duration (e.g., 1.5 hours) to catch micro-breakouts.
Swing/Intraday: Keep the default 4.5 hours or increase it to 8+ hours to capture major session ranges (like the London or New York opens).
Settings Overview
Lookback Duration: Set the "width" of your window in hours.
Window Area Fill: Customize the color and transparency of the range background.
Line Customization: Adjust the thickness and style (Solid/Dashed/Dotted) of the boundary lines.
Breakout Markers: Toggle the visibility of the triangles and diamonds to keep your chart clean.
Synthetic Renko Overlay + Instant Expansion Alert✔ Builds Renko bricks internally
✔ Overlays them on ANY chart (3m recommended)
✔ Detects sudden aggressive brick growth
✔ Fires alert on the FIRST push
✔ Works for NQ / ES / BTC / any market
Estratg PFX automt ( PRODIGIO.FX)The PFX Automt (PRODIGIO.FX) - NY | RR | Risk Fixed | ATR + BE strategy is an automated trading system designed to operate with precision in the market. It combines the SuperTrend indicator with advanced risk management, configurable Break Even (BE), and customizable alerts, providing a professional approach for traders seeking clear and well-defined trades.
Key Features:
SuperTrend Entry & Exit System
LONG/SHORT entries based on price crossovers with the SuperTrend.
Automatic exits when the price crosses the opposite trend.
SuperTrend plotted on the chart for intuitive tracking.
Advanced Risk Management
Configurable risk per trade in USD.
Dynamic Stop Loss based on SuperTrend values.
Take Profit automatically calculated according to the user-defined Risk Reward (RR).
Configurable Break Even (BE)
Automatically moves the stop to BE when the trade reaches the defined RR percentage.
Helps secure partial profits and minimize losses.
Optional ATR Anti-Chop Filter
Prevents trades during low volatility ranges.
Adjustable via ATR period and multiplier.
Customizable Trading Hours
Operates only during the New York session.
Fully adjustable start and end times.
Customizable Alerts
Notifications on LONG/SHORT entries.
Alerts on automatic trade exits.
Alerts when Break Even is activated.
Compatible with popup, email, or webhooks (ideal for integration with Telegram or automated trading systems).
Daily Trade Control
Limits the maximum number of trades per day to avoid overexposure.
NQS - Institutional Signal DashboardENGLISH :
This Dashboard has been designed to solve the biggest problem for cryptocurrency traders: FOMO and market "noise". Instead of watching 20 charts at once, this panel monitors the most important assets and only alerts you when multiple technical and institutional factors align.
The script uses a system of Engines and SMC (Smart Money Concepts) to filter entries.
🔥 How does the Strategy work? The indicator analyzes each asset based on 5 fundamental pillars:
Trend: Price must be above/below the 200 EMA.
Momentum
MACD
Volume
SMC: Detects institutional expansion candles to confirm that "whales" have entered.
⚙️ Unique Features:
GOD MODE: An ultra-strict filter. It only gives a signal if ALL conditions are met + SMC Displacement Candle. Ideal for snipers.
Price Memory: When a signal appears, the script "freezes" the exact entry price and shows it to you in parentheses (65000.00), allowing you to see if the price has already moved too far away.
Auto-Expiration (TTL): Goodbye zombie signals!
On 1-5 min charts: The signal clears if 1 hour passes.
On 15m-1h charts: The signal clears after 4 hours.
On Swing: The signal clears after 20 days.
Visual Alerts: The asset name and signal are colored (Green/Red) for instant identification.
Settings: You can choose the system's strictness (2, 3, 4 Engines or GOD MODE) and edit the list of 16 assets to monitor.
Viper Screener🔶 Overview
The Mkt-Viper Screener is the tactical command center of the Viper Suite. It is a multi-asset Telemetry Dashboard designed to provide market-wide situational awareness in a single glance.
Instead of flipping through dozens of charts to find setups, the Viper Screener processes up to 20 assets simultaneously, running them through the core "Viper V5" calculation kernel. It instantly categorizes market conditions based on Trend, Structure, Mean Reversion, and Momentum, allowing you to identify high-probability confluences across the entire market instantly.
🔶 What makes Mkt-Viper Screener unique?
While most screeners only look at simple Moving Averages or RSI, this tool runs a Regenerative Calculation Kernel. It miniaturizes the complex math found in the Viper Pro, Edge, and Oscillator and runs lightweight versions of them on 20 different tickers in the background.
It serves as the "Nexus" of the system, synchronizing the logic of the entire suite into a unified Heads-Up Display (HUD).
Main Features
The dashboard organizes data into four critical dimensions of market analysis:
🔶 1. Trend Signal (The "Pro" Engine)
This column utilizes the Viper Trend Signal logic found in the Mkt-Viper Pro.
BUY:
The asset is in a confirmed Bullish Trend.
SELL:
The asset is in a confirmed Bearish Trend.
🔶 2. Viper Band Status
This column calculates the asset's location relative to the dynamic volatility band.
ABOVE:
Price is extended to the upside (Potential Breakout or Overextension).
BELOW:
Price is extended to the downside.
INSIDE:
Price is trading within the mean-reversion channel (Consolidation).
🔶 3. Market Structure
This analyzes the swing points (Pivots) of the asset to determine the structural bias.
BULLISH:
The asset is making Higher Highs/Lows.
BEARISH:
The asset is making Lower Highs/Lows.
🔶 4. Oscillator Momentum
This utilizes a gravity-based momentum calculation similar to the Viper Oscillator.
RISING ↗:
Velocity is expanding upward.
FALLING ↘:
Velocity is expanding downward.
🔶 Global Auto-Tuning
The screener includes the Viper Synapse Tuner. You can set the sensitivity of the Trend Engine globally.
Fast:
For scalping multiple tickers on lower timeframes.
Moderate:
The standard setting for Swing Trading.
Slow:
For filtering macro-trends across the market.
🔶 Visual Intelligence (UI)
The interface is built with a "Glassmorphism" aesthetic designed to overlay cleanly on your chart without obstructing price action.
Positioning: Fully customizable (Top/Bottom, Left/Right).
Size: Scalable text to fit 4K monitors or Laptops.
🔶 How to use: The "Royal Flush" Workflow
The Screener is designed to find Alignment in the Market.
Step 1: Configuration
Input your favorite 20 assets (Crypto, Forex Pairs, or Indices) into the settings menu. Set the "Screener Timeframe" to your higher timeframe bias (e.g., 4 Hour or Daily).
Step 2: The Scan
Watch the dashboard. You are looking for Total Confluence.
The Strategy:
Full Bullish Lock: When the Trend is BUY, Structure is BULLISH, and Momentum is RISING. This indicates a high-probability impulse move is underway.
Contrarian Scan: If Trend is BUY, but the Viper Band says "ABOVE" and Momentum is "FALLING," the asset is likely due for a pullback. This alerts you to check the chart for a short setup.
🔶 Technical Note: Data Updates & Repainting
Real-Time Recalculation:
The dashboard updates in real-time. This means the status of the Current Open Candle (e.g., the current 4-Hour bar) is fluid. If price is fluctuating around the trendline, the "TREND" cell may flip between BUY and SELL until the candle officially closes. This is normal behavior for real-time monitoring tools.
Historical Data:
This script utilizes request.security with lookahead=barmerge.lookahead_off. This ensures that historical data does not repaint. Once a candle closes and a status is locked, it will never change.
Data Loading:
When loading the screener for the first time, allow the script a moment to fetch data for all 20 tickers. If a cell shows "NaN" or blank, it typically resolves on the next tick.
---------------------
Disclaimer
The content provided in my scripts, indicators, ideas, algorithms, and systems is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instruments. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information.
All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, back test, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
