MA Smart SyncMA Smart Sync determines the market bias by evaluating the price position relative to a moving average channel on four independent timeframes and returning a confluence signal when a configurable number of them agree.
Unlike standard MTF trend indicators that rely on EMA crossovers or slope direction, this script builds a channel around each timeframe and classifies price into three discrete zones: above, below, or inside. The "inside" state acts as a neutral filter, preventing false confluence signals during consolidation — a key distinction from binary up/down dashboards.
The channel itself can be constructed using five different methods selectable from a single input: High/Low MA (separate MAs applied to high and low), Close ± ATR, Close ± Standard Deviation, Close ± percentage offset, or classic Bollinger Bands. All five use the same MA type and length inputs, making it straightforward to compare how different volatility envelopes behave on the same instrument without rebuilding the indicator.
How to use:
— Set four timeframes matching your trading plan (defaults: 15m, 1h, 4h, D).
— Choose the channel method that fits your instrument's volatility profile. ATR-based channels adapt well to forex; StdDev and Bollinger suit equities and indices.
— Set "Minimum Confluence" to 3 or 4. A value of 4 means all timeframes must agree before a signal fires.
— The background color and arrow labels update only when bias changes, keeping the chart clean.
— Use the status table (top-right) to monitor each timeframe independently and identify which TFs are lagging.
ממוצע נע אקספוננציאלי (EMA)
Adaptive Trend Checklist (EMA + Supertrend + ADX)Adaptive Trend Checklist is a market context and validation tool designed for discretionary traders who prioritize structure, risk control, and trade quality over aggressive signal chasing.
The script combines EMA, Supertrend, and ADX, with optional multi-timeframe (HTF) confirmation, to provide a clear view of market conditions before entering a trade.
This is not a signal-spamming indicator.
It is a visual checklist that helps identify when to trade, when to reduce risk, and when to stay out of the market.
🔹 Key Features
🔁 Automatic timeframe adaptation
Parameters (EMA, ATR, ADX, Supertrend) automatically adjust based on the current chart timeframe.
🧠 Trend & range filtering
Uses ADX and price structure to filter out ranging and low-probability market conditions.
⏱️ Multi-timeframe market context (optional)
Confirms directional bias using higher timeframes.
🧮 Risk classification
Trades are classified as:
NORMAL
REDUCED
NO TRADE
📋 Clear visual checklist
Displays in real time:
trading mode,
trend status,
ADX condition,
market session,
recommended risk level.
🎯 Integrated trade management
Automatically plots:
Entry
Stop Loss
Take Profits (TP1, TP2, TP3)
Position size in dollars based on selected risk.
🚫 No repaint
🚫 No signal spam
🚫 No win-rate promises
⚠️ Important Notice
This script is not intended for fully mechanical or automated trading.
It is designed as a decision-support tool for traders who understand market structure, context, and risk management.
Performance depends on:
market conditions,
timeframe,
and trader discipline.
👤 Who Is This For?
✔️ Discretionary traders
✔️ Scalpers & intraday traders seeking better filters
✔️ Swing traders needing HTF context
❌ Not recommended for blind signal following
📎 Usage Recommendation
Use it as a primary market filter, not as a standalone signal.
Combine it with your own entry criteria.
EMA SMA LinesThis script draws 3 EMA lines and 2 SMA lines and each line has label attached to it. It is configurable.
Moving Averages - High_Low & Close/ Written by Love Sharma, CMT, CFTe , the concept is to identify when the moving average is rising and that too of highs and lows
//since there are various ways to generate signal from moving average but the high or low of MA has much weight of evidence as we are using the slope
One can just use the slope, or close above/below MA
//THE IDEA IS SIMPLE TO REMAIN RIGHT SIDE OF THE TREND
Bank CRE Stress & Short Risk Overlay + Dashboard
🏦 Bank CRE Short-Selling Dashboard:
- Expands the static database to better match the dashboard's highCRE + shortCandidates.
- Uses CRE ratio thresholds from dashboard (e.g., critical ~>500%, high ~400-500%, etc.).
- Keeps price stress logic (you can tweak it).
- Includes more failed/failed-like flags.
Access the Live Risk Monitoring & Trade Opportunities 🏦 Bank CRE Short-Selling Dashboard
claude.ai
EMA RaaIf you trade index options / futures intraday:
5 EMA → Entry timing
20 EMA → Trend pullback
50 EMA → Regime filter
Custom 4 EMA [TickDaddy]Custom 4 EMA
Hey everyone! I put together this EMA indicator because I wanted more flexibility than what's built into TradingView. Figured I'd share it in case anyone else finds it useful.
What it does:
Customizable EMA Periods
Change all 4 EMAs to whatever periods you want (I default them to 20/50/100/200 but you do you)
Not stuck with preset values - make it work for your strategy
Toggle EMAs On/Off
Each EMA has its own checkbox
Super handy when you want to hide one without losing your settings
Multi-Timeframe EMAs
This is the big one - you can view higher timeframe EMAs on your current chart
Like if you're day trading on a 15-min chart but want to see where the daily EMAs are
Works with any timeframe: Daily, Weekly, 4-Hour, whatever you need
Helps you respect the bigger picture while trading lower timeframes
Smooth Lines on Multi-Timeframe
Got rid of that annoying zigzag effect when using higher timeframes
You can adjust how smooth you want them (or turn it off)
Clean Setup
All the style stuff (colors, thickness, line style) is in the Style tab where it should be
Input settings are organized and not cluttered
Built this with Pine Script v6. Hope it helps with your trading!
Adaptive MTF EMA (auto TF)Adaptive MTF EMA (Auto TF) — Mid & Slow EMA that adjusts with chart timeframe
by @theadventuredan
This indicator plots two Higher-Timeframe EMAs (a Mid and a Slow EMA) on your current chart — but unlike normal MTF EMA scripts, the higher timeframes adapt automatically when you change the chart timeframe.
Instead of having to reconfigure TFs every time you switch from 5m to 15m to 1h, the indicator keeps the same “relationship” by using timeframe multipliers:
Mid TF = current chart TF × Mid Multiplier
Slow TF = current chart TF × Slow Multiplier
Example (default multipliers: 3× and 12×):
On 5m: Mid = 15m, Slow = 60m
On 15m: Mid = 45m, Slow = 180m (3h)
On 1h: Mid = 3h, Slow = 12h
This is especially useful if you use MTF EMA alignment as a trend filter (e.g., Mid EMA above Slow EMA = bullish bias).
How it works
The script reads your current chart timeframe using timeframe.in_seconds(timeframe.period) and converts it into minutes.
It calculates the adaptive MTF targets:
midMin = curMin × midMult
slowMin = curMin × slowMult
It requests the EMA from those higher timeframes via request.security() and plots them on your chart.
Optional:
A label can display the currently calculated Mid and Slow TFs (in minutes).
Inputs
EMA Length: EMA period (default 50)
Mid TF Multiplier: how many times higher the mid timeframe should be (default 3)
Slow TF Multiplier: how many times higher the slow timeframe should be (default 12)
Use confirmed HTF values (safer):
When enabled, the script uses the previous HTF EMA value (EMA ) to reduce behavior caused by partially formed higher-timeframe candles.
This may lag slightly but is often preferred for signal consistency.
Show TF label: shows a label with the current adaptive TFs
Notes / Limitations
Because the higher timeframe is derived by multiplication, some results may produce less common timeframes (e.g., 45m or 12h). This is expected.
MTF values depend on request.security() and will always reflect higher-timeframe candle logic (especially during an unclosed HTF candle). If you want less “in-progress candle” behavior, enable Use confirmed HTF values.
This is an EMA overlay tool — not a standalone buy/sell system.
Suggested usage
Trend bias filter: Mid EMA > Slow EMA = bullish bias, Mid < Slow = bearish bias
Entry alignment: use the adaptive EMAs as “context” while trading lower TF setups
Dynamic market structure: switch timeframes while keeping consistent “one step higher / two steps higher” EMA reference
SENTINEL CORE by Pipsomnian🛡️ Sentinel Core — Learning Mode (Structure & Probability Engine)
by Pipsomnian
Sentinel Core is the core structure and probability framework within the Sentinel ecosystem.
It is designed to help traders move beyond binary signals and learn how to grade market environments based on structure, momentum, and session quality.
This tool does not predict price.
It evaluates context.
🎯 What Sentinel Core Is
Sentinel Core is an EMA-structured learning and decision-grading indicator built to train:
• Trend alignment
• Pullback behavior
• Market structure continuation
• Session discipline (London & New York)
• Probability stacking
Instead of asking “Is there a signal?”,
Sentinel Core trains you to ask:
“How strong is this setup?”
🧠 The Scoring Concept
Each potential setup is evaluated using multiple structural components:
• EMA trend alignment
• Pullback to value
• Strong candle confirmation
• Market structure continuation
• Active trading session
The result is a setup quality grade:
• A+ → Full structural alignment
• B → Strong but incomplete alignment
Lower-quality environments are intentionally ignored.
This encourages patience, selectivity, and discipline.
🟢 Who Sentinel Core Is For
Sentinel Core is designed for traders who:
• Already understand basic EMA structure
• Want fewer, higher-quality setups
• Trade session-based markets (especially Gold)
• Value discipline over frequency
• Want to develop judgment, not dependency
🚫 What Sentinel Core Is NOT
Sentinel Core is not:
• A signal service
• An automated strategy
• A promise of profitability
• A replacement for risk management
• A shortcut to consistency
Execution, risk control, and psychology remain your responsibility.
⏱️ Recommended Use
• Timeframe: 5-Minute
• Markets: XAUUSD (Gold), major FX, liquid indices
• Sessions: London & New York
EMAs are used for structure and context, not prediction.
🧭 Position in the Sentinel Framework
• Sentinel Lite — Learn structure & discipline
• Sentinel Core — Grade probability & judgment
• Sentinel A+ — Refine timing & precision
• Sentinel Gold Standard — Execute with control
⚠️ Educational use only. No financial advice.
— Pipsomnian
Power200EMA - MTF 200 EMA SuiteThe MTF 200 EMA Suite is a trend-confluence tool designed to reveal institutional support and resistance levels across multiple timeframes simultaneously. By plotting the 200-period Exponential Moving Average from six different time horizons onto a single chart, it allows you to identify "Power Zones" where various market cycles overlap.
Core Functionality
Multi-Timeframe Visibility: On a single lower-timeframe chart (like the 1m or 5m), you can see exactly where the 200 EMA sits on the 1m, 3m, 5m, 15m, 1h, and 4h horizons.
Institutional Benchmarking: The 200 EMA is the primary "line in the sand" used by institutional algorithms and bank traders to determine long-term trend bias.
Dynamic Clustering: When multiple EMA lines converge or "cluster" in one price area, it identifies a high-probability zone of institutional interest.
Floating Labels: Each line features an auto-updating label at the current price bar, allowing you to instantly identify which timeframe you are looking at without hovering over the plots.
Strategic Use
Trend Filter: Trade only in the direction where price is relative to the majority of the EMAs (e.g., only buy when price is above the 1h and 4h lines).
Mean Reversion: Use the higher-timeframe lines (1h/4h) as targets for price to return to during volatile over-extensions.
Support/Resistance: Use EMA clusters as "hard" barriers to place stops behind or to look for bounce-entry confluence.
ED by bigmmED by bigmm identifies significant price divergences from the 200-period Exponential Moving Average (EMA) by analyzing closing and opening price extremes. This tool marks the three most recent candles with the largest percentage deviations.
Key Features
EMA200 Analysis: Uses the 200-period Exponential Moving Average as the primary reference level for measuring price deviations
Deviation Calculation: Computes percentage-based deviations for both closing (below EMA) and opening (above EMA) prices
Top 3 Extremes: Identifies and marks only the three most recent maximum deviations for each direction
Visual Simplicity: Uses minimalistic green and red dots for clear visual identification without chart clutter
Historical Analysis: Evaluates the last 1440 bars (approximately 3 years on daily timeframe) to find significant deviation patterns
Recommended Usage
Best used on higher timeframes (H4, D1, W1) for the following reasons:
Reduced Noise: Higher timeframes filter out market noise and provide cleaner deviation signals
Trend Context: EMA200 carries more significance on daily and weekly charts as a major trend indicator
Strategic Signals: Extreme deviations on higher timeframes often correspond to important support/resistance levels and potential reversal zones
Reduced False Signals: Longer timeframes minimize whipsaws and provide more reliable extreme readings
Position Trading: Ideal for swing traders and position traders who base decisions on daily or weekly price action
EUR/USD: EUR USD 5 MIN SCALPING by Scalper Pro Systems// DISCLAIMER:
// This script is for educational purposes only. It is not financial advice.
// Past performance does not guarantee future results.
// Use this tool at your own risk.
EUR/USD: EUR USD 5 MIN SCALPING by Scalper Pro Systems
Overview
This is a plug-and-play scalping system designed specifically for the EUR/USD 5-Minute chart . Created by Scalper Pro Systems , it simplifies intraday trading by automatically generating Buy/Sell signals with precise Take Profit and Stop Loss levels.
How It Works
The strategy uses a "Safety First" approach to find stable entries:
1. Trend Filter (EMA 200): Ensures you only trade with the main trend (Buy only if price is above; Sell only if price is below).
2. Entry Trigger (EMA 9 & 21): Identifies short-term momentum shifts.
3. Noise Filter (RSI): Prevents entering trades when momentum is weak or exhausted.
Main Features
🟢🔴 Clear Signals: Draws Green (Buy) and Red (Sell) boxes directly on the chart.
📉📈 Auto TP & SL: Instantly calculates your Stop Loss (based on recent swing lows/highs) and Take Profit (1.5x risk) and displays the exact price numbers.
⏱️ Live Tracking: The system tracks the trade for you and marks exactly when and where the Target or Stop Loss was hit.
📊 Dashboard: Shows Signal Time, Entry Price, TP, and SL in a clean information box.
Best Settings
Timeframe: 5 Minutes
Asset: EUR/USD (Can also be used on Gold/XAUUSD or Indices)
Session: Best used during London or New York sessions.
Risk Warning
Trading involves risk. This tool helps visualize a strategy but does not guarantee profits. Always manage your risk.
Rishii's EMA Trend EngineThis indicator is a dual-EMA trend framework designed to improve intraday decision-making by filtering out sideways market noise and highlighting only meaningful trend participation.
It uses a fast and slow EMA to define trend direction, while applying an HLC3-based color logic to show whether price is respecting each EMA. Candles turn green or red only when both the trend alignment and price participation conditions are satisfied. Neutral candles can be shown in white to visually remove noise and make valid candles stand out.
Additional filters such as EMA slope detection and optional higher-timeframe bias help avoid false signals during ranging conditions. A background trend zone and first-candle markers after EMA crossover further improve clarity without cluttering the chart.
How it helps
Clearly shows when the market is trending vs sideways
Highlights only those candles where price is truly participating in the trend
Filters out most whipsaws caused by flat EMAs BITSTAMP:BTCUSD
Combines trend bias, momentum, and participation in one clean view
Caution
This is a trend-following tool, not a reversal indicator.
When EMAs are flat and candles turn white, avoid trading
Do not treat every green/red candle as an entry; wait for proper structure.
Always use proper stop-loss and position sizing.
Funnelzon Graded Buy and Sell Signals (LITE) MFI MTFFunnelzon Buy and Sell Signals (EMA Zones) – LITE is a lightweight overlay indicator built for scalping and short-term trading. It generates BUY/SELL signals, grades each signal (A+ to F), and provides a clean Confirmation Box that summarizes multi-timeframe context so you can make faster, more structured decisions.
How it works
Signal Engine (LTF)
Signals are triggered using an ATR-based “scalp helper” logic with adjustable sensitivity.
A stop-state system helps reduce repeated or noisy entries.
Signal Scoring & Grades (A+ → F)
When a signal appears, it is evaluated by a context pipeline that considers:
Adaptive momentum/flow (AMF)
ALMA trend alignment
Support/Resistance proximity
Swing structure behavior
Market regime / trend strength (ADX-based)
The result is a score mapped to a grade:
A+ / A = strongest signals
B / C = mixed conditions
D / F = low-quality conditions
Optional Filters
MFI Filter: Helps avoid signals that do not meet Money Flow conditions.
HTF Confirmation (MTF): Uses HTF1 and HTF2 bias. Choose strict filtering or soft alignment.
Confirmation Box (Dashboard)
The box displays:
HTF State: Trend Long / Trend Short / HTF Conflict / Neutral
Market Mode: Trend / Pullback / Conflict
Trade Bias: Long-only / Short-only / Wait
ENTRY NOW? = “YES” when HTF bias and LTF signal align
MFI status + HTF1/HTF2 direction
Optional Structure Tools
EMA overlays: 9 / 12 / 20 / 50 / 100 / 200
Auto Supply/Demand zones (pivot-based, ATR thickness, configurable extension and limits)
Best practices (recommended workflow)
Prefer trading A+ / A signals only.
Trade in the direction of HTF State when possible.
If Market Mode shows PULLBACK or CONFLICT, reduce risk or wait for better alignment.
Use Supply/Demand zones and EMAs for structure (targets, invalidation, and bias).
Important: Confirmation with Stochastic + MACD
This script is a signal + context tool, not a guarantee. To validate signal confirmation, it is strongly recommended to use:
Stochastic Oscillator (momentum/exhaustion confirmation)
MACD (trend momentum and direction confirmation)
Only take trades when the script signal and your confirmation indicators agree.
Alerts
Includes alert conditions for:
Buy Signal
Sell Signal
Any Signal
ENTRY NOW (HTF + LTF aligned)
ENTRY NOW Long / ENTRY NOW Short
Disclaimer
This indicator is for educational purposes and does not constitute financial advice. Always backtest, manage risk, and confirm signals with your own rules.
AUTO FIB PRO - VWAP Bias and Retrace Breakouts (DAX NQ) v6AUTO FIB PRO by funnelzon automatically detects swing points (pivot highs/lows), draws dynamic Fibonacci levels, highlights the key retracement area (0.236–0.618), and prints continuation-style BUY/SELL signals after a retrace. It also includes VWAP + VWAP zone (ATR-based), a configurable trend filter (EMA200 / HTF EMA200 / VWAP / combined “BEST”), session & volatility filters, a CHOP blocker, a top-right “traffic light” status panel, and optional manual R/S zones (R1–R4 & S1–S4) with width presets and background highlighting.
1) Auto Swing → Auto Fibonacci
The script detects swing points using pivot highs/lows.
Once two valid swing points are available (P1 → P2), it plots Fibonacci levels:
0.236 / 0.382 / 0.500 / 0.618 / 0.786 / 1.000
Lines extend to the right and update automatically with new swings.
2) Retracement Box (0.236–0.618)
The yellow retracement box marks the key pullback area between 0.236 and 0.618.
Optional ATR padding can slightly widen the box (helps with “near touches”).
3) VWAP + VWAP Zone + VWAP Bias Label
VWAP line is optional.
VWAP zone is an ATR-based band around VWAP.
Bias label shows: BULL / BEAR / NEUTRAL, placed outside the chart (left/right selectable).
4) Filters (to avoid low-quality market phases)
Session Filter (DAX / NQ sessions in CET)
ATR-Min Filter (blocks low volatility)
CHOP Filter (blocks markets that get “stuck” inside the retracement zone for too long)
5) Signals (Continuation After Retrace)
Default behavior (Continuation ON):
Retracement zone must be touched first (setup becomes “armed”).
Signal triggers only when price breaks out across the box edge:
BUY: crossover above retrace top + bullish candle + filters OK
SELL: crossunder below retrace bottom + bearish candle + filters OK
Alternative (Continuation OFF):
More aggressive signals can trigger already inside the retracement box.
6) Signal Quality Modes
MORE Trades: looser rules, more signals (optional counter-trend allowed)
A+ ONLY: stricter rules (RSI + EMA slope + trend alignment)
7) Traffic-Light Panel (Top Right)
Shows in real time:
Auto preset type (DAX/NQ + Scalp/Swing + FAST/STABLE)
STATUS: TRADE OK / NO TRADE (and the reason)
Direction: LONG / SHORT / WAIT
Selected trend filter mode
VWAP bias
Pivot length
8) Manual Support/Resistance Zones (R1–R4 & S1–S4)
8 zones as price “areas” (boxes), extended left/right in time
Width presets: Narrow / Normal / Wide or Manual (Points/ATR)
Optional background highlighting when price is inside a zone
Key Features
Auto Swing Detection (Pivot High/Low) → builds P1 → P2 swing
Auto Fibonacci Levels: 0.236 / 0.382 / 0.500 / 0.618 / 0.786 / 1.000
Retracement Box: 0.236–0.618 (+ optional ATR padding)
VWAP Line + VWAP Zone (ATR-based)
VWAP Bias Label: BULL / BEAR / NEUTRAL (outside the chart)
Trend Filter Modes: OFF / EMA200 / HTF EMA200 / VWAP / HTF EMA200 + VWAP (BEST)
Trade Quality Modes:
MORE Trades (looser, more signals)
A+ ONLY (stricter: RSI + EMA slope + trend alignment)
Gate Filters:
Session filter (DAX / NQ CET sessions)
ATR-min filter (blocks low volatility)
CHOP filter (blocks extended sideways inside retrace zone)
Traffic Light Panel (Top Right): STATUS, DIR, FILTER, VWAP BIAS, PivotLen
Manual Zones (R1–R4 / S1–S4):
Width presets: Narrow / Normal / Wide (or Manual via Points/ATR)
Optional background highlight when price is inside a zone
Signals (Logic)
Default (Continuation ON):
Setup becomes “armed” after retracement zone touch
Signal triggers only on breakout:
BUY: close crosses above retrace top + bullish candle + filters OK
SELL: close crosses below retrace bottom + bearish candle + filters OK
Continuation OFF: more aggressive signals can trigger already inside the retracement box.
Recommended Setup (Quick Presets)
Clean & Reliable (recommended)
Auto Presets: ON
Mode: AUTO / SCALP (1/5/15)
Auto Fib Mode: STABLE
Quality: A+ ONLY
Continuation: ON
Trend Filter: HTF EMA200 + VWAP (BEST)
Session filter: ON
ATR-min: ON
CHOP filter: ON
More Trades
Auto Fib Mode: FAST
Quality: MORE Trades
Trend Filter: VWAP or EMA200
FAQ (Quick)
Q: Why do I see “NO TRADE” in the panel?
A: One of the gate filters blocks signals (outside session, ATR too low, or CHOP detected).
Q: Why no signals even though price is moving?
A: A valid swing (P1→P2) must exist, retrace zone must be touched (Continuation ON), and trend/quality filters must pass.
Q: What does CHOP mean here?
A: Price stayed inside the retracement zone for too many bars → higher noise → signals disabled until conditions improve.
Q: DAX vs NQ feels different — what should I change first?
A: Start with Market Preset, then adjust VWAP zone ATR mult and CHOP bars limit.
Disclaimer
Educational/analytical tool only. Not financial advice. Use risk management and confirm signals with market context.
Momentum Adaptive EMA | RakoQuantMomentum Adaptive EMA is a trend-following moving average system designed to dynamically adjust its responsiveness based on market momentum.
Instead of using a fixed smoothing speed like a normal EMA, this indicator becomes fast in strong moves and slow in choppy conditions, producing a cleaner adaptive trend structure.
This version also introduces a secondary POT Moving Average for smooth regime confirmation.
Core Idea
This indicator answers one key question:
Is momentum accelerating enough to justify a faster trend response?
By adapting the EMA’s smoothing factor in real time, the indicator avoids the two classic problems of moving averages:
Lag in strong trends
Whipsaws in sideways markets
How It Works
1. Momentum-Based Adaptivity Engine
The indicator measures momentum using a Rate-of-Change style move:
ROC = current price − price N bars ago
That momentum is normalized by volatility:
Momentum Strength = |ROC| ÷ stdev(ROC)
This produces a clean, scale-independent momentum score.
2. Adaptive EMA (Dynamic Alpha)
Instead of a constant EMA alpha, smoothing is adjusted between:
Alpha Min → slow mode (stable markets)
Alpha Max → fast mode (strong trend markets)
Adaptivity is controlled by:
k (Strength Parameter)
High momentum → EMA reacts faster
Low momentum → EMA smooths more
3. POT Moving Average (Weighted Trend Anchor)
A second moving average is calculated using a Power-Weighted POT MA, where the most recent values receive heavier weight:
Stronger emphasis on recent trend shifts
Smooth confirmation without volatility bands
This creates a clean dual-average regime filter:
Adaptive EMA = fast regime line
POT MA = slower structure anchor
Regime Signals
Trend regime is defined by crossovers:
Bullish regime: Adaptive EMA crosses above POT MA
Bearish regime: Adaptive EMA crosses below POT MA
Optional persistence keeps regimes stable instead of flipping constantly.
Visual System
Bull regime → Ice Blue trend state
Bear regime → Navy trend state
Candle painting optionally matches the active regime
The result is a clean institutional trend overlay with adaptive behavior.
Alerts Included
Bull Break Alert → Adaptive EMA crosses ABOVE POT MA
Bear Break Alert → Adaptive EMA crosses BELOW POT MA
Useful for automation or confirmation systems.
How to Use
✅ Trend filter for directional trading
✅ Adaptive MA replacement for classic EMA systems
✅ Works well on higher timeframes (4H / 1D)
✅ Combine with breakouts, momentum triggers, or volume tools for entries
Inputs Summary
Momentum Length → speed of momentum detection
Normalization Length → volatility scaling window
Alpha Min / Alpha Max → slow vs fast response bounds
Adaptivity Strength (k) → aggressiveness of adaptation
POT Length + Power → smoothing of the confirmation MA
Persistent Regime Toggle → stability vs live switching
Candle Paint Toggle → visual regime clarity
Screenshot Placement
📸 Example chart / screenshot: (insert image here)
Tip: show a strong bull trend + one bearish flip so users understand the adaptive behavior.
Cyberpunk GMMA Reactor ProCyberpunk GMMA Reactor Pro
System Concept
Dive into the data stream. Cyberpunk GMMA Reactor Pro is a high-performance visualizer based on the Guppy Multiple Moving Average (GMMA). It transforms market trends into glowing "Digital Ribbons," allowing you to perceive market energy through neon-lit intensities.
This script isn't just about aesthetics; it’s a professional-grade tool designed to identify trend strength, exhaustion, and reversals using 12 layers of Exponential Moving Averages (EMA).
Key Features
・Dual-Stream ribbons:
-Neon Magenta (Short-Term): Represents the "Drones" (traders' sentiment).
-Neon Cyan (Long-Term): Represents the "Mainframe" (investors' foundation).
・Reactor Glow (Dynamic Background): The background pulsates based on the "Spread" between EMA3 and EMA30 relative to volatility (ATR). When the trend accelerates, the reactor glows brighter.
・System Signals: Real-time Golden Cross (System Boot) and Death Cross (System Critical) alerts.
・High-Tech UI: Bilingual settings (English/Japanese) for a seamless global experience.
How to Use
1. Expansion (The Stream): When the ribbons spread apart and the background glows intensely, a strong trend is in progress.
2. Squeeze (The Compression): When all lines converge, the system is "recharging" for the next big breakout.
3. Cross (The Breach): Use the System Boot/Critical signals to identify potential entry and exit points.
システムコンセプト
データの潮流へ。Cyberpunk GMMA Reactor Pro は、グッピー複合移動平均線（GMMA）をベースにした高性能ビジュアライザーです。市場のトレンドを輝く「デジタル・リボン」へと変換し、ネオンの輝きによって相場のエネルギーを直感的に把握できます。
単なる見た目重視のツールではありません。12本の指数平滑移動平均線（EMA）を駆使し、トレンドの強さ、収束、反転を見極めるプロフェッショナル仕様のインジケーターです。
主な機能
・デュアル・ストリーム・リボン：
-ネオンマゼンタ（短期群）: 「ドローン（短期トレーダー）」の心理を反映。
-ネオンシアン（長期群）: 「メインフレーム（長期投資家）」の基盤を反映。
・リアクター・グロウ（背景発光）: EMA3とEMA30の乖離率をATR（ボラティリティ）で計算し、背景が動的に発光。トレンドが加速するほど光が強まります。
・システム・シグナル: ゴールデンクロス（System Boot）とデッドクロス（System Critical）をリアルタイムで表示。
・ハイテクUI: 英語と日本語を併記したバイリンガル設定画面。
トレードへの活用法
1. エクスパンション（拡散）: リボンが広がり、背景が強く発光している時は、強力なトレンドが継続中です。
2. スクイーズ（収束）: 全てのラインが一本に収束し始めたら、次なるブレイクアウトに向けたエネルギー充填のサインです。
3. クロス（突破）: System Boot / Criticalシグナルを参考に、エントリーや利確のタイミングを計ります。
DonkeyKong 3 minuteTis is a test script for ema movement
Deselect the yellow for quicker entry and exit for 3 minute
Daily 10 & 20 EMA (Shown on All Timeframes)The 10-day EMA is the quicker one. It hugs price closely, reacting fast to every twitch and hesitation. When price respects it, momentum feels alive. When price slices through it, you sense hesitation before it shows up elsewhere.
The 20-day EMA moves with more weight. It doesn’t flinch at noise. It represents the market’s short-term memory, the line price keeps returning to when trends are healthy. Above it, bias feels constructive. Below it, gravity takes over.
Together, they form a rhythm pair:
When the 10 EMA rides above the 20 EMA, the market is leaning forward.
When the 10 EMA sinks below the 20 EMA, momentum is cooling or rolling over.
When price compresses between them, indecision is building energy.
Across all timeframes, they scale like a fractal:
On lower timeframes, they act as tactical guides for entries, pullbacks, and exits.
On higher timeframes, they define structure, trend health, and whether moves are worth trusting.
They don’t predict. They contextualize.
They don’t command. They frame the battlefield
